REPAIR/MAINT OF ROLLING SHUTTER, RAILING, STEPS,VERANDAH/SHEDS IN ZONE B AREA AT BB CANT, SRINAGAR

Amount

S&F(in repair) Steel rolling shutters,1.25mm thick, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated,complete: push pull or manual type with bevel gear box and crank handle complete all as specified and directed.

Taking down shutters exc 1 sqm and n.exc 2 sqm each, complete all as specified and directed.

Taking down frame with shutters (without taking off shutters from frame) n.exc 1.5 sq.m each, complete all as specified and directed.

Taking down frame with shutters (without taking off shutters from frame) exc 1.5 sqm but n.exc 4 sqm each, complete all as specified and directed.

S&F for 2nd class hard-wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

M&L for 35mm thick 2nd class hard wood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln easoned and chemically pressure treated, complete all as specified and as directed.

S&F 30mm thick 2nd class hardwood factory made glazed and skeleton door/window shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and as directed.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections/ 3 truck and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Chief, complete all as specified and as directed.

S&F powder coating of any colour (Thickness or powder coating not less than 50 micron Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws, handle, locking arrangement etc., complete all as specified and as directed.

S&F powder coating of any colour (Thickness or powder coating not less than 50 micron Anodised aluminium window and ventilator shutters, fixed type/sliding type/side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handle, locking arrangement etc.complete all as specified and as directed.

M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and as directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane, complete all as specified and as directed.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples etc., complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets, complete all as specified and directed.

M&L 9mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work, complete all as specified and directed.

M&L 6mm thick Non Asbestos fibre cement /Pre Laminated self embosssed texture designer board E-Board classic size 600x600mm, HPSC (High pressure steam cured) to be fixed or inserted to pre laminated GI frame work for seamless ceiling size 600mm x 600mm with main runner 38x24x0.9mm thick, cross tee 8.6x24x0.9mm and wall angle 19x19x0.9mm duly suspended with 6mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip, complete all as specified and directed.

S&F solid PVC Wall linning consisting of 5mm thick plain colour PVC sheet 5mm thick PVC fillet of width20mm L & U for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.(Note: Removing &Refixing of electric fitting &wiring is responsible of contractor with any extra cost), complete all as specified and directed.

S & F 5mm thick printed PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement site, laid over suitable frame including necessary fillet/cornices etc., complete all as specified and directed.

S&F 1.5mm thick Decorative laminate type 1 of surface finish, colour and pattern including necessary fillets/ cornices as approved, fixed with approved adhesive as per manufacturer's instructions., complete all as specified and directed.

M&L 18-19mm thick Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work including required teak wood lipping , complete all as specified and directed.

S & F stainless steel butt hinges medium weight 100 mm size etc., complete all as specified and directed.

Description all as per serial item No 23here-in-before, but of size 75mm, complete all as specified and directed.

S & F 150 mm size extruded aluminium handles fabricated type, anodised, complete all as specified and directed.

S & F 150 mm size aluminium anodised barrel tower bolts of extruded sections all as specified and directed.

S & F 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple & fixed clips of sheet, cast or extruded section & fixed bolts & sliding bolts of extruded section or cast aluminium alloy, complete all as specified and directed.

S & F 100 mm size Aluminium anodised hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed.

S & F 30mm width flap, Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc., complete all as specified and directed.

M&L for brickwork with old sized subclass 'B' bricks straight or curved on plan exc 6m mean radius and built in CM 1:6 etc., complete all as specified and directed.

Taking down cement plaster of any description, on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M & L for rendering 15mm thick cement plaster in CM (1:6) on brick work or concrete surfaces finished even and fair without using extra cement, complete all as specified and directed.

M & L for rendering 10mm thick cement plaster in CM (1:4) on brick work or concrete surfaces finished even and fair without using extra cement, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description, complete all as specified and directed.

S&F for Framed brackets of angles or tees with web and flanges, tubular pipes cut to shape,drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165, complete all as specified and directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement including dismantling complete all as specified and directed.

M&L Virified Ceramic tiles 10 mm thick Light shade (square/ rectangular) dark shade, polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc., complete all specified and directed.

M&L coloured glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm / 200x 300x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick backing coat in CM 1:4, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc, complete all as specified and directed.

M&L coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc, complete all specified and directed.

Hacking out old broken glass (any thickness size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, complete all as specified and directed.

S&F 12mm thick toughned glass as in hinged door, partitions automatic door with necessary long solid fency handle, suitable hinges, locking arrangment, hydraulic floor spring as required, design as approved by GE, complete all as specified and directed.

S&F 10mm thick toughned glass cubical as in hinged door, partitions automatic doors with necessary long solid fency handle, suitable hinges, locking arrangment, hydraulic floor spring as required, design as approved by GE, complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. Laid bedded in any mortar complete all as specified and directed

M&L for 18-20mm thick Granite (of any type) in steps, jambs, pillars, window- cills, cooking platforms and like including rounding edges, laid over 15mm thick in cement mortar (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite , complete all as specified and directed. .

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes including necessary bends, fittings etc single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Description all as per serial item No 47 here-in-before, but 75mm dia, complete all as specified and directed.

S & F in repairs sinks with drainage board made of stainles steel 1 mm thick kitchin or laboratory with plugs washers and waste pipes, including bedding in cement mortor to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx 460mm, each bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

S&F in repairs 15mm bore Brass CP mixer (sink/WHB/wall) (any pattern) for mixing hot & cold water screwed down for iron pipe, with or without hand shower and fixed, complete all as specified and directed.

S&F in repairs 15mm bore Bib taps, chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule etc., complete all as specified and directed.

S&F in repairs 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed.

S&F in repairs 15mm bore stop valves or angle valve, fancy type chromium plated, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions etc., complete all as specified and directed.

S&F 500 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including brass float valve all as specified in SSR Part I including dismantling PVC water tanks exc 250 litres and not exc 500 litres capacity etc., complete all as specified and directed.

Demolition of plain cement concrete(un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) etc., complete all as specified and directed.

M&L for rubber moulded chequered cement concrete tiles with grey cement and pigments 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 20 mm thick screed bed or bedding layer in CM 1:6 over 75mm thick PCC(1:4:8) type D2(using 40mm ccrushed stone aggregate), complete all as specified and as directed.

M&L for rubber moulded Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment laid over 50mm thick sand cusining over 75mm thick PCC(1:4:8) type D2 (using 40mm graded crused stone aggregate), complete all as specified and as directed.

Demolition of Concrete (reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

M&L for RCC (nominal mix) type B1 1:2:4 (using 20mm graded stone aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including use and waste formwork, complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick(Horizontal or sloping), complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge thickness , including nanital or similar pattern roof covering, complete all as specified and directed.

S&F 0.63 mm galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with coach screws and washers, in roof, wall etc with grade of zinc coating 275, complete all as specified and directed.

S&F 0.63 mm Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, fixed with coach screws and washers, in roof, wall etc., complete all as specified and directed.

S&F in repair 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugated side lap fixed with L type or J type or cranked hook and washer in wall, complete all as specified and directed.

Dismantling of timber scantlings 40 sq. cm and over in section, in any position unframed work , complete all as specified and directed.

M&L wrought Second class hard-wood in scantlings frame work, complete all as specified.

S& F in repair Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) of 75 mm dia etc., complete all as specified and directed.

S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white excluding fixing bolts, flushing cistern and flush pipe) including PVC seat cover (closed pattern) and CP health facet , connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc., complete all as specified and directed.

S&F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, complete all as specified and directed.

S & F in repairs one piece Vitreous China wash down water closet pan with flush cistern (any colour) floor/wall hang type including PVC seat cover (closed pattern) & CP health facet connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc., complete all as specified and directed.

S & F in repairs vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc., complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm etc., complete all as specified and directed.

S&F in repairs 125mm brass chromium plated shower roses including fixing to steel pipe etc., complete all as specified and directed.

S&F in repairs vitreous china wash basin of size 550x400mm (flat back or angle back type) including brackets cutting for and pinning in ends of brackets or erecting stand inclusive 32mm waste fittings, brass, chromium plated for basins, waste pipe etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement etc., complete all as specified and directed.

S&F in repairs vitreous china oval type wash basin of inclusive 32mm waste fittings, brass, chromium plated ,waste pipe etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement etc., complete all as specified and directed.

S&F in repairs Toilet paper holder chromium plated, box type with chromium plated (CP) brass screws, complete all as specified and directed.

S&F in repairs brass chromium plated Tubular towel rail 20mm dia, complete all as specified and directed.

S&F Towel Ring of CP fixed with and including Chromium plated brass screws, complete all as specified and directed.

S&F in repairs Soap dish, vitreous China white, approximate size 160x 160x90mm fixed to plugs with chromium plated brass screws, complete all as specified and directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.

S&F in repairs 100 mm bore, spun pipes, Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors, walls including necessary bends, fittings, stack clamp etc complete all as specified and directed.

Description all as per serial item No 83 here-in-before,but 75mm bore, complete all as specified and directed. .

S&F in repairs for wooden laminated flooring in strips of size 120 cm long and 20 cm wide and 6-8 mm thick, fixed with PVC sheet and cushion including fillets/cornices, laid over 12mm thick BWR plywood complete all as per manufracturer's instruction all as specified and directed.

S&F 10-12mm thick 1st class softwood wooden(Australian) panelling fixed with tounged and grouted a wall panelling and including fillets/cornices and 9mm ply wood fixing on wall and two coat of warnishing, polishing and prerparation with sneezing, Including Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) complete all as specifiedf and directed(including double height bldg walls). complete all as specified and directed. Note : (i) Diconnecting of electrical connections from main DB and removing all switch accessories including switch socket, sheet metal enclosures of all E/M nature (Fittings & Fixtures). (ii) Connecting and refixing of all electrical connections from main DB and fixing of switch accessories such as switch socket, sheet metal enclosure of all E/M nature (Fittings& Fixtures)

S&F in repairs Aluminium (die cast body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg, complete all as specified and directed.

M&L for Preparation of new wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

Preparation of newly plastered wall surfaces by using necessary filling compound of Altek/Birla white 1mm thick wall care putty to obtain smooth/even surface using sand paper and applying two coats of oil bound dismater over a coat of primer.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint over a coat of primer, complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer.

S&F in repair 25mm dia stainless steel drapery curtain rods, heavy duty, fancy type with fancy brackets & domes (two in each door and window) complete all as specifeid and directed.

Notes :- An amount of Rs.86,976.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum.

M/S ABDUL KARIM RATHER (BID ID -3367093)

Alishan Builders (BID ID -3362504)

M/S Tajamul Ah Buchh (BID ID -3369803)

M/S PARVEZ AHMAD LONE (BID ID -3360385)

M/S D N Enterprises (BID ID -3362323)

M/S AIJAZ ENTERPRISES (BID ID -3361954)

Concept Engineering & Constructions (BID ID -3361728)

M/s Lal Enterprises (BID ID -3369927)