Karnataka

AOC

Works

Buildings

Estimate for Providing Cubicle Workstation and Other Repair work to Accounts Section in CSR&TI, Mysuru City

Public Works Department

PWD Speical Division Office Mysuru | Mysuru, Karnataka

Amount: ₹31.0 LCloses: 8 May 2026Closed

Timeline

Published24 Apr 2026
Closed8 May 2026
Awarded—

Bids

1 Bid8 May 2026

#	Company	Amount	Status
1	NANJUNDA ₹20.4 Laccepted-aoc	₹20.4 L	accepted-aoc

Tender Value

₹31.0 L

EMD Value

₹31,050

Closing Date

8 May 2026, 10:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

Executive Engineer Special Division Mysuru

Mobile Number

Work Description

Estimate for Providing Cubicle Workstation and Other Repair work to Accounts Section in CSR&TI, Mysuru City (Reserved for ST Category)

Tender Information

Tender ID

PWD/2026-27/BD/WORK_INDENT35826

Reference Number

PWD/2026-27/BD/WORK_INDENT35826

Tender Type

Reserved

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD Speical Division Office Mysuru

Source Website

Subscribe to view

Documents Required

7 documents required · 7 mandatory

Technical Bid

RequiredAnnual Turnover Certificate with UDIN from CA and Profit & loss statements for the year 2021-22, 2022-23, 2023-24,2024-25 and 2025-26

RequiredKPWD Registration Certificate class III and above

RequiredTenderers will only be qualified, if their available tender capacity is more than the total tender value as per KW-2

RequiredList of existing commitments and ongoing work

RequiredList of works for which tenders already submitted

RequiredCASTE CERTIFICATE-VALID ST CASTE/CATEGORY CERTIFICATE

RequiredDOMICILE CERTIFICATE- Contractor should be domicile of state of karnataka for more than 10 years

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The Tender processing fee shall not be refundable.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of Karnataka Procurement portal due to internet connectivity issues and technical glitches at bidders end.

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on award of contract

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs.

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders.

As per Karnataka state Government order LD/300/LET/2006 Bangalore dated 01.01.2007 and Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1%

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval.

The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons.

In the case of the death of the contractor after executing the agreement / commencement of the work, his legal heir, if is an eligible registered contractor and is willing can execute and compete the work at the accepted tender rates irrespective of the cost of the work.

Contractor should carryout additional test required to test the suitability of materials.at their own cost.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent.

The contractors assessed available tender capacity will be calculated as per Standard Tender Document tender document-KW2

All the items in the tender include all lead lifts loading unloading transportation labour hire charges of machinery curing for concrete works cost and conveyance of all material and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer- in-charge of this work.

All precautions should be taken by the contractor so that there are no damages to such public/ private properties.

Contractor should take all precautionary measures to avoid any damage to the utilities during excavation as well as utility shifting. To that extent the contractor should indemnify the client.

Contractor should follow strictly the prevailing rules of labour act.

Contractor should adhere to HSE (Health Safety Environment) policy applicable for similar projects. Contractor to that extent should submit HSE document defining all the procedure including the policies before execution of the project.

Contractor should take all precautions to ensure that no damage is caused to the existing structures which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost.

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Tender documents KW 2

Contractors should be registered as KPWD Class III and above

Further particulars, if any, required by the Contractor can be had from the office of the Executive Engineer, Public works Department Special Division Mysore during office hours on all working days.

Contractors registered under Class III may tender for works within the districts of the Public Works Department circles where in they are registered.

The contractor should pay the wage for labour as per schedule of rates. The contractor quoting less rates below schedule of rates for labour will be rejected.

3.2(a)To qualify for award of this contract each tenderer in its name should have in the last five years 2021-22, 2022-23, 2023-24,2024-25 and 2025-26 achieved in at least ONE financial years an average financial turnover in all classes of civil engineering construction works only of Rs 31.04 Lakhs

3.2(b)To qualify for award of this contract each tenderer in its name should have in the last five years 2021-22, 2022-23, 2023-24,2024-25 and 2025-26 Satisfactorily completed, as prime contractor, at least ANY CONSTRUCTION WORK of value not less than Rs 7.76 Lakhs

ALL THE RATES ARE EXCLUSIVE OF GST AND GST WILL BE PAID SEPARATELY

The duration for completion of whole work is 06 months

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

the contractor belonging to the Scheduled Castes or Scheduled Tribes or any other reserved category shall be domicile of the State of Karnataka for more than 10 years and upload valid domicile certifcate

Security deposit for an amount equivalent to 5% of the contract price payable shall be deducted in every running bill.However, in case of first and final bill the entire security deposit will be deducted from the final bill. (As per GO NO: FD 611 EXP-12/2023 Bangalore dtd :03.02.2024)

Technical Criteria

General

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Total value of civl engineering works executed and payments received in the last five years (year-wise)

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Proposals for subcontracting components of works amounting to more than 20% of the contract price (for each, the qualifications and experience of the identified sub-contractor in the relevant fields should be attached)

Capabilities of Vendor

Work Done Certificate

List of existing commitments and ongoing works

Work Done Certificate

List of works for which tenders already submitted

Work Done Certificate

Financial Status

Audited CA Certificate of Annual Turnover

Annual Turnover Certificate with UDIN from CA and Profit & loss statements for the year 2021-22, 2022-23, 2023-24,2024-25 and 2025-26

Audited CA Certificate of Annual Turnover

Fee & Financial Details

Tender Fee Amount

₹780

EMD Fee Amount

₹31,050

Important Dates

Last Activity

8 May 2026

Published

24 Apr 2026

Bid Opening

11 May 2026

Download Ends

7 May 2026

BOQ Preview

•

Estimate for Providing Cubicle Workstation and Other Repair work to Accounts Section in CSR&TI, Mysuru City

•

Dismantling tile work in floors and roofs laid in cement mortar includ- ing stacking material to the appropriate disposal area as per direction of Engineer-in-charge.For thickness of tiles above 25 ...

•

Demolishing brick work manually/ by mechanical means including stack- ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-i...

•

Providing and laying Vitrified tiles with thickness 9-10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all co...

•

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), includi...

•

Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and s...

•

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material to the appropriate disposal ...

•

Providing and supplying 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand bo xes,shelves,racks,almirah,cupboard and drawer etc. in...

•

Providing and supplying cupboard shutter with 18mm thick one side Architect recommended decorative laminate (1mm thick) and other side balancing lamination(preferably white) HDHMR boARD of app...

•

Labour & installation charges for BWP ply:BWR ply:HDHMR: MDF & Particle board work of any thickness applicable for all types of work ---- Including cost of all materials, with all lead lift a...

•

Removing white or colour wash by scrapping and sand papering and pre- paring the surface smooth including necessary repairs to scratches etc. complete as per specifications and as per directions of En...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...

•

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 g/L, of approved brand and manufacture, including applying additional co...

•

Providing & Fixing of Mineral Fibre Acoustical Suspended Ceiling System in module size of 600 x 600 x 20mm with Exposed Grid for Hospitals, Shopping malls, Commercial establishments and office com...

•

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of ...

•

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawing...

•

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doo...

•

CUBICLE WORKSTATIONS Providing and fixing CUBICLE WORKSTATIONS consisting of wings made out of 75 mm thick MS CRCA powder coated ,tile based system for main and return spine, Top tile finish 8 mm thic...

•

Manufacturing, supplying and fixing wooden ward robe of 0.60m deep using 19mm thick vinyl bonded water proof block board, shutters allround ward robe, lockable drawers with sliding channels, cupboard ...

•

Providing and Supplying of Revolving chair with Head rest. The seat is made up of 12mm hot pressed plywood upholstered with fabric back seat of PP structure with mesh. The armrest is fixed type PP wit...

•

Providing and Supplying of Revolving chair with out Head rest. The seat is made up of 12mm hot pressed plywood upholstered with fabric back seat of PP structure with mesh. The armrest is fixed type PP...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW-2 Document ST CATEGORY.doc

Tender Document • 0.21 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

NANJUNDA

₹20.4 Laccepted-aoc