REPAIR TO COMPOUND BOUNDARY WALL AND ALLIED B AND R WORKS AT AHRR UNDER GE EM RR HOSP DELHI CANTT

Amount

Taking down cement plaster on brick or stone walls including racking out joints, hacking for key scrubbing down with water etc.

M&L for rendering 15 mm thick in CM 1:4 on brick or concrete surfaces using integral water proofing compound (3% by weight of cement) finished even and fair (without using extra cement) complete all as specified and directed ( Note: water proofing compound shall be measured for paid separately as supply only)

Demolition of brick work built in cement mortar including all quoins, arches, pillars, drain and culvert in foul condition etc.complete all as specified and directed by Engr-in-Charge

M&L for old size fly ash brick work, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance asper IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces. incl 1mm thick cement based wall care putty, complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in coping as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (including backing), and rubbish off the premises, complete all as specified & directed.

M&L for exterior finish wall tiles as in vertical surfaces of size 300mm x 450mm x 8-9 mm / 300mm x 600mm x 8-9mm thick, including 10mm thick rendering in CM 1:4 to recieve wall tiles, design and pattern as directed, set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified and directed.

S&F for heavy duty coloured paving tiles of size 300mmx300mmx8-9mm thick, exterior grade, set and jointed with neat cement slurry and pointed in colour or white cement to match, laid over and including screed bed and bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes incl surrounding area covered with green cloth complete all as specified and as directed. Note- During the wk the curtain/seperate partition to be made either green cloth or sheet. No extra payment will be made on this account.

Demolition of stone slab and tiles of any description or thickness in floor , apron etc laid bedded and pointed in any mortar and removing rubbish off permises all as specifed and directed.

M & L for 17-18mm thick granite of any type (table rubbed & polished) in jambs, pillars, window cills, plate forms in CM (1:4) including pointing in white cement (1:2) ,using marble dust with admixture of pigment to match with shade of granite over 20mm thick screed bed in CM 1:4 complete all as specified and directed by Engr-in-Charge.

Providing edge moulding to stone/tiles of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete.

M&L for sand filling under floors or in foundations including watering and consolidation

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and no pigment

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment all as directed and specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M&L for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated). Fe-290 Gde E-165.

Erection and fixing only Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated). Fe-290 Gde E-165.

S&F in repair galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured).

M&L for preparation of new steel or iron surfaces surfaces of any description, over 10cm in width or girth,not otherwise described and applying a coat of red oxide and applying two coats of synthetic enamel paints

M&L for brick work with old serviceable brick (obtained from demolition) straight or curved on plan exc 6 m mean radius built in CM 1:6 incl cleaning of old bricks, laying to proper bond,racking of joints complete all as specified and directed.

Demolition of cement concrete unreinforced( in ground floors and paving at any position 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge

M&L PCC 1:5:10 type E-2 (using 40 mm graded stone aggregate) in mass concrete, foundation, surface drain etc complete all as specified and directed .

M&L 75mm thick cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub-base all as specified and directed.

M&L for 200mm dia reinforced concrete pipes, class NP2, laid and jointed complete with collars

Material and labour for pre-polished coloured chequered cement concrete tiles 30cm X 30cm X 20-22mm thick, with white cement and pigments, set, jointed and pointed in neat cement slurry in floors over 15mm thick screed bed in CM 1:6 including demolition of tiles complete all as specified and directed.

S&F for factory made kerb stone (sample as approved and of top grade with moulded smooth finished surface in PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in road kerbs of required size chamfered on edges complete all as specified and as directed.

M/L for prepration of new concrete surfaces and applying two coat of synthetic enamel paint over one coat of priming paints coat over 10 cm width, or girth not otherwise described described completed all as specified and as directed.

M/L for prepration of old concrete surfaces and applying one coat of synthetic enamel paint over 10 cm width, or girth not otherwise described described completed all as specified and as directed.

Demolition of (reinforced) cement concrete of any description and in any position not otherwise specifically provided for

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M&L for R.C.C.(Nominal Mix) type B1 1:2:4 (20mm graded aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

M&L for scooping, taking out sludge, foreign material and cleaning, cleaning of sewage/drainage lines of depth n. Exc. 1.5meter complete with tools and plants as required at site

S & F factory made precast RCC drain or manhole cover of size 1200x500x65mm thick with MS flat iron frame of 65x1mm thick including setting & levelling complete all as specified.

M&L for preparation of old steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately).

Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge

M&L for 20mm thick sand stone slabs polished, set and jointed in cement and stone dust mortar 1:3 and pointed in cement mixed with approved pigment to match and strengthen with drilling hole for fastner ,polishing ,rubbing & including silicon treatment and grouting with CM 1:3 (SS Fastners 75-100mm long ) complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc.

M&L for providing, cement concrete type C1 1:3:6 (20mm graded aggregate) as in plinth courses, string courses, lacing courses, kerbs, concrete beds including weathering, slightly rounded or chamfered angles and throating, as directed.

Demolition and breaking up drain pipes (SGSW, AC or reinforced concrete) set in cement mortar of 200 mm internal dia of Pipe, complete all as specified & directed.

Supply and laying of Precast Cement Concrete Drain 100mm thick, factory-made, of any size as per requirement and depth of M-30 grade concrete (as per IS:456), vibrated and cured, including handling, transportation, and placing in position, jointing with cement mortar 1:3 (1 cement : 3 coarse sand), with all necessary excavation of required depth, preparation of base, backfilling, and compacting complete in all respects, all as specified and directed.

M&L for 16-18mm thick granite with top surface flamed finish with polished (anti skid texture) of any type in floors in cement mortar (1:6) jointing shall be filled with matching grout including 15mm thick screed bed or bedding layer in CM 1:6, exposed edge shall also be flamed or chamfered as per site requirement complete all as specified & directed by Engr-in-Charge.

Shivam Firetech Engineers (BID ID -3437586)

OMVIN ENTERPRISES LLP (BID ID -3446953)

M/S MG GROUP (BID ID -3439408)

S GOURAV PRAKASH ENTERPRISES (BID ID -3442821)

GIAN BUILDERS (BID ID -3440723)

POONAM ENTERPRISES (BID ID -3440889)