Extension of 1-L Jatai Link Drain from RD 20000-21958 out falling at RD 77265-R Saiman Dhanana Link Drain

Amount

Earthwork in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift up to 1.5 m, as directed by Engineer-in-charge for all kinds of soil @ HSR 4.12.1

Excavating, supplying and filling of local earth (including royalty) by mechanical transport up to a lead of 1 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. HSR 4.33

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level 1:3:6 ( 1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size). HSR 6.1.4

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in : Cement mortar 1:3 ( 1 cement : 3 coarse sand) HSR 7.21.1+(7.3-7.4)

Brick work with common burnt clay non-modular bricks of class designation 7.5 in foundation and plinth in : Cement mortar 1:4 (1 cement : 4 coarse sand). HSR 7.21.1

Providing and Laying Reinforced cement concrete pipe NP3/ prestressed concrete pipe for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets 1200mm dia, as per clause 2900 of MORT&H specifications. HSR 17.63.2

Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand) : Flush/ Ruled/ Struck or weathered pointing. HSR 11.25.1

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level 1:2:4( 1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size). HSR 6.1.3

12 mm cement plaster of mix : 12 mm cement plaster of mix. HSR 11.5.2

Dressing bed and preparation of sub grade for lining by mechanical/ mannual means. HSR 14.1

Providing and lying 60 mm thick factory made cement concrete interlocking pawer block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over (BIS 15658 : 2006) and including 50 mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per direction of Engineer-in -charge. HSR 10.76

Centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platform. HSR 6.30.3

Centering and shuttering including strutting, propping etc. and removal of form for Retaining walls, return walls, walfs (any thickness) including attached pilasters, buttersses, plinth and string courses fillets, kerbs and steps etc. HSR 6.29.2

Steel reinforcement for RCC work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding wastage, overlaps, weldedjoints, spacerbars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. HSR 6.33.6

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size. HSR 6.14.1

Pankaj Kumar Contractor