Renovation of Gents and Ladies Toilet near LCA Methods Door Assembly and ALH CTM in ACD HAL

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

PAN No.:

Service Tax Registration No

Goods and Service Tax ID No.

Contact details

Please Enter Contact person Name

Pls Enter Mobile No

Registered Contractor

Average annual financial turn over during the last 3 years, ending 31st March 2024 of the previous financial year [ should not be less than 30% of Amount put to tender]

TURN OVER IN Rs.

Pls Enter Turn over in Rupees for all the 3 years

ESI & PF Nos with proof

Remarks if any

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission

Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs

Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Please enter Details for Work No 1

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No II

work done

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No III

Details of person holding the power of Attorney (If different from contact person)

Related Document to be Uploaded to eProcurement Portal

Pls Enter Details for Person holding Power of Attorney

DECLARATION I

DECLARATION II

Pls Accept the Delaration II

Specification

Taking out doors, windows and clerestory window shutters (steel or wood) of area 3 Sq m and below including stacking within 50 metres lead, etc., all complete as directed by Engineer-in-Charge.

Demolishing cement concrete manually/ by mechanical meansincluding disposal of material within 50 metres lead, etc., all complete as directed by Engineer-in-Charge.

Demolishing brick work with cement morter manually / by mechanical means including stacking of serviceable material and disposal of unserviceable materialwithin 50 metres lead, etc., all complete as directed by Engineer-in-Charge.

Dismantling 15 to 40mm dia GI / CPVC pipe including stacking of dismantled pipes (within 50 metres lead) including making temporary arrangements for continuing ongoing services to toilets, etc., all complete as directed by Engineer-in-Charge.

Taking down cement / lime palstering of any desription on brick walls inlcuding raking out joints, scrubbing, etc., all complete as directed by Engineer-in-Charge.

Providing and mixing of integrated waterproofing compond in cement concrete as per manufacturer specification, etc., all complete as directed by Engineer-in-Charge.

Plastering to internal brick / block wall with 15mm thick on the rough side of single or half brick wall of cemnet mortor (1:4) including leveling, curing and making the level smooth and at all heights, 25mm plaster drip course / groove in plastered surface or moulding to R.C.C. projections and execute the work, etc., all complete as directed by Engineer-in-Charge.

Plastering to external brick / block wall with 18mm cement plaster in two coats under layer 12mm thick cement plaster on the rough side with cement mortor 1:5 (1 cement : 5 coarse sand) finished with a top layer 6mm thick cement plaster 1:6 (1 cement : 6 fine sand) including leveling, curing and making the level smooth and at all heights, 25mm plaster drip course / groove in plastered surface or moulding to R.C.C. projections and execute the work, etc., all complete as directed by Engineer-in-Charge.

Repair to plaster of thickness 12mm to 20mm in patches of area lesser than 2.50 Sq m including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, without causing hindrance /protecting the existing floor finish work, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing Ceramic glazed wall tiles (Light / dark shade) conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, colours, shades over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.30kg per Sq m, including dismantling of existing tiles and pointing in white cement mixed with pigment of matching shade of any size, etc., all complete as directed by Engineer-in-Charge.

Providing and laying Ceramic glazed floor tiles of size [300 x 300]mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in approved colours, shades, laid on 20mm thick bed of cement mortar1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.30 kg / Sq m including dismantling of existing tiles and pointing the joints with white cement and matching pigments, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing Granite stone slab of with (18mm to 25mm thick), area of slab not less than 0.50Sq m, like Ruby Red / Black / Cherry with gang saw cut, mirror polished, premoulded and prepolished, machine cut for urinal partitions,platforms, vanity counters and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing bright finished brass 100mm mortice latch and lock with minimum 6levers and a pair of lever handles of approved quality with necessary screws, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing white vitreous china battery / electric based infrared sensor operated urinal of approximate size [610 x 390 x 370]mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets embedded in cement mortar (1:3), connecting the waste pipe to floor trap with all necessary fittings and accessories like 32mm dia semi-rigid PVC waste pipe (concealed in the wall) including dismanteling of existing urinals, PVC waste fittings, clamps, etc., all as per manufacturers specification, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing Wall hung half pedestal Vitreous China Wash basin size of approximate size [630 x 450]mm fixed with with C.I. brackets / rack bolts , single 15mm C.P. brass pillar taps, 32mm C.P. brass waste coupling of standard pattern, P.V.C. waste pipe with waste fittings of 40mm dia and make it function of approved brand / make, including dismanteling of existing wash basin, painting of fittings and brackets, cutting and making good the walls wherever required, etc., all complete as directed by Engineer-in-Charge.

Providing & fixing White vitreous china Orissa pattern water closet squatting pan of approximate size [630 X 450]mm or nearest available size along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) of approved brand with ISI marked white solid plastic seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all connecting fittings and fixtures to make it operational completely, including dismanling the existing WC ,cutting and making good to the walls and floors wherever required, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing beveled edge mirror of size [600 x 450]mm of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing 20mm dia chromium plated brass curtain rod /Towel rail of 600mm long having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary, etc., all complete as directed by Engineer-in-Charge.

Providing, fixing, testing and commissioning trap (floor trap) of approved make with 100mm inlet and 75mm outlet of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors , connection with PVC soil / waste pipe, necessary 150mm thick cement concrete (1:2:4) for embedding the trap, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing 15mm nominal bore dia C.P. brass bib cock of approved quality conforming to IS:8931, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end), etc., all complete as directed by Engineer-in-Charge.

20mm dia

25mm dia

Providing and fixing 15mm nominal bore C.P. brass stop cock (concealed) of standard design and of approved make, etc., all complete as directed by Engineer-in-Charge.

Supplying and fixing of PVC connector 15mm size of length 450mm, etc., all complete as directed by Engineer-in-Charge.

Providing and applying internal wall and ceiling painting with two coats of premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50grams / litre after applying white cement based putty of average thickness 1mm over the plastered wall surface including preparation of the surfces, with a coat of low VOC primer with emery paper to bring to smooth and even including applying additional coats wherever required to achieve even shade and colour of approved brand, etc., all complete as directed by Engineer-in-Charge.

Providing and finishing old walls in two or more coats with Premium Acrylic Smooth exterior paint with Silicone additives of approved brand of required shade @ 1.43 ltr / 10 Sq m over existing cement paint surface after Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing 30mm thick flush door shutters conforming to IS :2202 (Part I) non-decorative type of approved brand / make, core of block board construction with frame of 1st class hard wood & lipping with 2nd class teak wood battens 25mm minimum depth on all edges and well matched commercial 3ply veneering with vertical grains or cross bands including ISI marked Stainless Steel butt hinges with necessary screws and face veneers on both faces of shutters and making rectangular vision panel of 0.10Sq m with 6mm thick clear heat strengthened glass, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing bright finished brass handles of 125mm size with screws, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing bright finished brass [125 x 85 x 5.50]mm (heavy type) butt hinges with necessary screws, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing bright finished brass tower bolts of [200 x 10]mm (barrel type) with necessary screws, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing aluminium sliding door bolts (aldrop) of [250 x 16]mm, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing Concealed Chlorinated Polyvinyl Chloride (CPVC) pipes of approved brand, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, fixing the pipe with clamps at 1.00m spacing, necessary reducers, unions, collars, bends, tank adaptors, etc., This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints and making good the walls, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section [90 x 45]mm having single rebate of [32 x 15]mm to receive shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing to existing door frames. 30mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam PUF) / Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, etc., all complete as directed by Engineer-in-Charge.

Supplying, laying, testing and commissioning the following dia PVC pipes of 6 kg/cm² SWR grade and of approved make with rubber ring joints conforming to IS 5382, jointed together with solvent, in trenches and floors, including all necessary fittings & specials, bends, branches, sockets, pipe cutting and wastages, cutting and making good the floors, etc., all complete as directed by the Engineer-in-Charge

75mm dia

110mm dia

Supplying and fixing of 5mm thick sheet glass and fixed with aluminium frame / shutter work, etc., all complete as directed by Engineer-in-Charge.

Supply and laying Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level in all floors level with 1:4 Cement mortar (1 cement :4 coarse sand) as per drawing, etc., all complete as directed by Engineer-in-Charge.

Supply and laying Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level in all floors level in all shapes and sizes in 1:6 Cement mortar including curing as per drawing, etc., all complete as directed by Engineer-in-Charge.

Supplying, mixing and placing plain cement concrete (1:2:4) (1 Cement : 2 coarse sand derived from natural sources : 4 graded stone aggregate) of required thickness using 20mm nominal size down graded hard stone/granite aggregate in accordance with IS 456 in posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets,sunken floor etc including formwork, mechanical mixing, transporting, vibrating, consolidation, levelling, curing, dewatering if any, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions etc., but excluding the cost of centering, shuttering and finishing, etc., all complete as directed by Engineer-in-Charge.

Painting Wooden surfaces of any description with two coats of synthetic enamel paint conforming to IS 2932, of approved colour and manufacture over a coat of primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content,with ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams / litre including preparation of surface by rubbing with fine grade of abrasive paper to ensure smooth and even surface, applying knifing paste filler putty before painting the first coat, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35Kgs and door width upto 700mm), with necessary accessories and screws, etc., all complete as directed by Engineer-in-Charge.

Disposal of surplus earth / moorum / building rubbish / malba / similar unserviceable, dismantled or waste material of partitions, ceiling boards, tiles, frames, etc., by mechanical transport including loading, transporting, unloading in all lifts/loads upt 10 km distance from HAL, etc., all complete as directed by Engineer-in-Charge.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank of 2000 Litres capacilty , IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements,weighing not less than 106gms (or nearest availabe size and weight), etc., all complete as directed by Engineer-in-Charge.

Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300mm dia PVC pipe conforming BIS-12818 and making good the same, etc., all complete as directed by Engineer-in-Charge.

Supplying and Fixing louvered type Exhaust fans of 300mm dia of approved make and type, etc., all complete as directed by Engineer-in-Charge.

Supply and Making connection of drain pipes of 100 to 250mm diamete or sewer line with existing manhole including breaking/cutting into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) cement plastered on both sides with C.M 1:3 ( 1 cement : 3 caorse sand ), finished with a floating coat of neat cement and making necessary channels for the drain, etc., all complete as directed by Engineer-in-Charge.

Providing and placing in position 100mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.60mm thick , 100mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing 15mm dia C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690gms, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing 32mm nominal dia Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints, etc., all complete as directed by Engineer-in-Charge.

Providing Sal wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length, etc., all complete as directed by Engineer-in-Charge.

Providing and laying gang saw cut 30mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups, etc., all complete as directed by Engineer-in-Charge.

Providing, fabricating and fixing aluminium work for partitions, Curtain wall frames,windows, ventilators (Min. thickness of powder coating 50 microns) made up of aluminium extruded sections. Ventilators: Approximately [63.50 X 38.10 X 1.70]mm and weight n.less than 0.90Kg/m conforming to designaton 63400 of IS 1285 and of approved make, Sliding Window Frame: Top and side sections of the frame shall be approximate [91.80 x 31.75 x 1.50]mm and weighing not less than 0.98 kg/m to accomodate the shutter section. d) Bottom section of the frame shall be with gutter and not less than [91.80 x 45.50 to 37.50 x 1.50]mm and weighing not less than 1.57 kg/m and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, Partitions with Approximate [101 X 44 X 2]mm weighing not less than 1.57 kg/m fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber / neoprene gasket, etc., Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, etc., all complete as per architectural drawings and the directions of Engineer-in-Charge. (Glazing, paneling will be paid seperately)

For fixed portion outer framePowder coated aluminium (minimum thickness of powder coating 50 micron)

For shutters of doors, three track sliding windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required also includes handles, tower bolts, stoper, if required wheels, etc., all complete as directed by Engineer-in-Charge.

Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws, etc., all complete as per architectural drawings and directions of Engineer-in-Charge.

Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side

Providing and fixing glazing in aluminium door, three track sliding window, ventilator shutters and partitions, etc., with EPDM rubber / neoprene gasket, etc., all complete as per the architectural drawings and the directions of Engineer-in-Charge . (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 5mm thickness (weight not less than 12.50 kg/Sq m)

Providing and fixing brass 100mm mortice latch and lock with 6 levers without pair handles (best make of approved quality) for aluminium doors including necessary cutting and making good, etc., all complete as directed by Engineer-in-Charge.

Rupees Eighteen Lakh Sixty Two Thousand One Hundred Seventy Nine and Thirty Six Paise Only

Approximate Amount Put to Tender

Rupees Three Lakh Thirty Five Thousand One Hundred Ninety Two and Twenty Eight Paise Only

Rupees Twenty One Lakh Ninety Seven Thousand Three Hundred Seventy One and Sixty Four Paise Only