Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.1 LAccepted-AOC NOT SPECIFIED | L1 | Accepted-AOC DUE TO L1 | |
| 2 | L2₹38.5 L+₹4.6 L (13.7%)Rejected-Finance | L2 | Rejected-Finance HIGHER RATE | |
| 3 | L3₹39.5 L+₹5.7 L (16.9%)Rejected-Finance 283 ALIEN MARKET SADAR KABARI BAZAR MEERUT CANTT UP | L3 | Rejected-Finance HIGHER RATE | |
| 4 | L4₹44.3 L+₹10.4 L (30.8%)Rejected-Finance | L4 | Rejected-Finance HIGHER RATE | |
| 5 | L5₹46.9 L+₹13.0 L (38.6%)Rejected-Finance | L5 | Rejected-Finance HIGHER RATE |
| Sl No | Description | Qty | Unit | M/S GR construction compony L2 | B S R Enterprises L5 | vibha associates L3 | M/S SONU ENTERPRISES L4 | ATHARV CONSTRUCTION L1 | J S CONSTRUCTION CO L6 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Demolition of cement concrete unreinforced of any description and in any position not other wise specifically provided incling removing the unserviceable material out side the MOD land complete all as specified and directed. | 13.25 | Cum | 200 ₹2,650 | 100 ₹1,325 Lowest | 300 ₹3,975 | 100 ₹1,325 Lowest | 300 ₹3,975 | 550 ₹7,287.5 |
| 2.00 | M&L for lean concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed. | 10 | Cum | 2,500 ₹25,000 | 3,000 ₹30,000 | 2,500 ₹25,000 | 500 ₹5,000 Lowest | 2,500 ₹25,000 | 4,800 ₹48,000 |
| 3.00 | M&L for 40mm thick cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor finished even and smooth surface without using extra cement complete all as specified and directed. | 87 | Sqm | 150 ₹13,050 | 250 ₹21,750 | 120 ₹10,440 | 100 ₹8,700 Lowest | 120 ₹10,440 | 155 ₹13,485 |
| 4.00 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. | 99 | Sqm | 550 ₹54,450 | 650 ₹64,350 | 700 ₹69,300 | 500 ₹49,500 Lowest | 600 ₹59,400 | 780 ₹77,220 |
| 5.00 | M&L for cement concrete chequered tiles top PU quoted with size 300x300x22-25 mm thick with grey cement and no pigment, set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces as in floors over and including 15 mm thick screed bed in cement mortar 1:6 including taking down old unsv tiles complete all as specified and directed. | 87 | Sqm | 500 ₹43,500 | 720 ₹62,640 | 600 ₹52,200 | 400 ₹34,800 Lowest | 500 ₹43,500 | 690 ₹60,030 |
| 6.00 | Providing and laying in repair at or near ground level factory made kerb stone of size at top 100 x 300 and bottom 300 x 150 mm and height 300mm as per Indian std solid cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. | 200 | Each | 100 ₹20,000 Lowest | 200 ₹40,000 | 150 ₹30,000 | 100 ₹20,000 Lowest | 120 ₹24,000 | 700 ₹1,40,000 |
| 7.00 | M&L for preparation of new concrete, wall surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed. | 40 | Sqm | 35 ₹1,400 Lowest | 80 ₹3,200 | 100 ₹4,000 | 100 ₹4,000 | 100 ₹4,000 | 55 ₹2,200 |
| 8.00 | S&F in repair Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed. | 10 | 100 RM | 1,350 ₹13,500 | 1,200 ₹12,000 | 2,500 ₹25,000 | 1,000 ₹10,000 Lowest | 1,800 ₹18,000 | 1,550 ₹15,500 |
| 9.00 | S&F in repair Galvanised steel punched tape concertina coil (PTCC) razor blade having minimum weight of 6.50 kgs (+) or (-) 5% per coil streched to a length of 5 to 6 mts (50 turns) to achieve 600 mm dia wire thickness 2.50mm as in fencing to steel post and to another coil/MS nibs etc including fixing with special galvanised fastners such as clips, Clips, U clips complete all as specified and directed.
Note : Linear length of coil after stretching and fixing shall be measured for purpose of payment. | 100 | RM | 700 ₹70,000 | 150 ₹15,000 | 300 ₹30,000 | 130 ₹13,000 Lowest | 250 ₹25,000 | 1,400 ₹1,40,000 |
| 10.00 | Demolition of brick work or stone/boulder masonry including all quoins, arches, pillars, etc, built in cement mortar complete all as specified and directed. | 52 | Cum | 200 ₹10,400 | 200 ₹10,400 | 300 ₹15,600 | 100 ₹5,200 Lowest | 300 ₹15,600 | 450 ₹23,400 |
Tender Value
Refer Docs
EMD Value
₹98,000
Closing Date
9 Aug 2025, 6:00 pmClosed
GE NEW DELHI
GE NEW DELHI, SP MARG NAR ABHM GATE NO 5
REPAIR/ MAINT OF HARDSTANDING, PATH, FOOTPATH, GATE, FENCING, BOUNDARY WALL AND CONNECTED WORKS AT ABHM, ABHM ANNEXE AND IHQ OF MOD (ARMY) TPT UNIT ASC UNDER GE NEW DELHI
2025_MES_720127_1
NIT No GE/ND-36/2025-26
Open Tender
Civil Works
Item Rate
180 days
GE NEW DELHI
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE NEW DELHI
₹98,000
Yes
14 Oct 2025
12 Jul 2025
11 Aug 2025
12 Jul 2025
9 Aug 2025
26 Jul 2025
Amount
Demolition of cement concrete unreinforced of any description and in any position not other wise specifically provided incling removing the unserviceable material out side the MOD land complete all as specified and directed.
M&L for lean concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.
M&L for 40mm thick cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor finished even and smooth surface without using extra cement complete all as specified and directed.
M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.
M&L for cement concrete chequered tiles top PU quoted with size 300x300x22-25 mm thick with grey cement and no pigment, set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces as in floors over and including 15 mm thick screed bed in cement mortar 1:6 including taking down old unsv tiles complete all as specified and directed.
Providing and laying in repair at or near ground level factory made kerb stone of size at top 100 x 300 and bottom 300 x 150 mm and height 300mm as per Indian std solid cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.
M&L for preparation of new concrete, wall surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.
S&F in repair Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.
S&F in repair Galvanised steel punched tape concertina coil (PTCC) razor blade having minimum weight of 6.50 kgs (+) or (-) 5% per coil streched to a length of 5 to 6 mts (50 turns) to achieve 600 mm dia wire thickness 2.50mm as in fencing to steel post and to another coil/MS nibs etc including fixing with special galvanised fastners such as clips, Clips, U clips complete all as specified and directed. Note : Linear length of coil after stretching and fixing shall be measured for purpose of payment.
Demolition of brick work or stone/boulder masonry including all quoins, arches, pillars, etc, built in cement mortar complete all as specified and directed.
M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.
M&L for brick work with sub class B bricks, using old size bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels, drains including all necessary form work complete all as specified and directed.
M&L for extra forming fair finished drain on channel 30 m inner girth in cemenjt concrete using extra cement including forms, moulds mitered/ stopped ends etc complete all as specified and directed.
Add or deduct for each 25 mm girth or part thereof over or under 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed. Note : For adjustment of rate only against item No 14.00 here-in-before
M&L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in coping including weathering, slightly rounded or chamfered angles and throating, as directed and necessary form work complete all as specified and directed.
M&L for 15 mm thick rendering on fair faces of brick work or concrete surface in cement mortar 1:4 on external wall finished even and smooth (without using extar cement) complete all as specified and directed.
M&L for preparation of new plastered or unplastered surfaces of walls and applying three coats of white wash on walls complete all as specified and directed.
M&L for Preparing newly plastered surfaces of walls and applying two coats of exterior emulsion paint (Apex) over a coat of primer over 2 mm thich water proof putty complete all as specified and directed.
Dismantling of stone slab and tiles of any description or thickness in floors, apron, laid, dry and pointed and remove it out of MOD land complete all as specified and directed.
M&L for 20mm thick Italian Marble machine cut in floor/ steps laid over cement 20mm thick screed in CM 1:6 and jointed with grey/colour cement slurry to match the floor suface including design as per drg and specefication including cutting and polishing and laying by hightly skilled labours colour and shade shall be as per aproved by GE complete all as specified and directed.
All as per item No 21.00 above but for in vertical surfaces as skirting, dado etc. and including 15 mm thick rendering in cement mortar 1:4 complete all as specified and directed.
M&L for providing edge moulding to marble stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specefied and directed.
M&L for machine cut Kota stone slab flooring, riser, trade 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the floor/stair including grinding, rubbing and polishing and exposed edges of Kota stone shall be rounded complete over and including 20 mm thick screed bed or bedding layer in CM 1:6 finished even and rough complete all as specified and directed.
M&L for Granite stone (mirror polished) of 16-18 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the floor including grinding, rubbing and polishing (granite finish) and exposed edges of stone shall be rounded complete over and including 20 mm thick screed bed or bedding layer in CM 1:6 finished even and rough complete all as specified and directed.
M&L for 16-18 mm thick granite stone any type machine cut at vertical surface, bedded and jointed with grey cement slurry and pointed with white cement with admisture of pigment to match the shade of granite stone including grinding and polishing and including rounded edges with shade of granite complete and including rendering 15mm thick in cement mortar 1:3 finished even and rough complete all as specified and directed.
M&L for Dholpur stone with hammer dressed facework (with maximum depression from a straight edge held against the dressed urface not exc 15mm) of 20mm thick fixed with min 3mm groups or pressure in straight line in vertical surfaces such as dado/skirting laid over and including rendering 15 mm thick in CM 1:4 jointed with grey cement slurry and incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including cutting and polishing and suitable numbers of 8 to10mm dia fastener shall be placed to proper griping of each stone complete all as specified and directed.
All as per item No 27.00 but machine polished complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description and any positions not other wise provided for complete all as specified and directed.
S&F mild steel framed work such as grills, grating Y angle etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars,barred iron doors, ladders, framed balusters, walk ways, railings and similar work confirming to Fe-410-0 or Fe 310-0 complete all as specefied and directed.
S&F of mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete, drill for fixing of steel sheeting or other covering etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting and also fastening and fixing Grade of steel Fe-410W (E-250 quality -A) complete all as specified and directed.
M&L steel work as in hand rails, wind ties for roof including securing bolts, posts and struts in fencing including cutting top to shape as directed drilling holes, notching for wire etc flat iron fillets for securing wire mesh etc including all necessary drilling bolting or riveting etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.
S&F structural mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framingetc (beam, tee, angle, channel or flat section) including distance pieces, cleats etc confirming to Fe 410-W (Gde 250 quality A) complete all as specified and directed.
M&L for preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Dismantling of plain or corrugated any type of roof sheeting, any gauge and thickness including Nainital or similar pattern roof coverings complete all as specified and directed.
S&F colour or transparent (as directed by engr in charge) Polycarbonate Sheets ‘H’ pattern multiwall of 10mm thick and wall 1 mm nominal thickness, excellent physical properties of polycarbonate, UV surface protection, min 20 % light transmission,high impact resistance, weather resistant, High heat and sound insulation, Long life span, Temperature resistant- between -20°C +100°C, light-weight, superb thermal suitable for Roofing, Shedding, walling etc fixing with MS frame structure with self tapping stainless steel screw with rubber/polycarbonate washer and all joints shall be filled with silicone jel all as specified by manufacture complete all as specified and directed.
S&F aluminum strip for polycarbonate sheet pressure and closures of size 40mm wide section on roof/wall as it forms a weatherproof seal to the end of the sheets preventing water ingress and aids in maximum lifespan of the polycarbonate sheets alongwith rubber bids in groves of aluminum strips with self-tapping stainless steel screw with rubber/ polycarbonate washer as per manufactures instructions complete all as specified and directed.
M&L in repair for multi layer POP false ceiling in steps (in layers) as per drawing and as dircted by GE at site with horizontal and vertical GI frame work and fiber/mess reinforcement as required including putty work for finishing smooth. Painting with plastic plastic emulsion paint in two coats over primer over fininshed POP surface with suitable arrangement for Spot light/ ceiling light as per drawing/ picture complete all as specified and directed.
M&L in repair for Semi circular of width 15 to 25 mm and depth 15 to 25mm of each line of multilines POP work at wall as per drawing and as dircted by GE including prepartion of existing wall surface and putty work for finishing smooth. Painting with plastic plastic emulsion paint in two coats over primer over fininshed POP surface as per drawing/ picture complete all as specified and directed.
M&L in repair for rectangular of width 100mm and depth 25 to 35 mm POP work at wall as per drawing including prepartion of existing surface wall and as dircted by GE including putty work for finishing smooth. Painting with plastic plastic emulsion paint in two coats over primer over fininshed POP surface as per drawing/ picture complete all as specified and directed.
Dismantling of wall jali/ board of any type and shape with frame work and prepared the surface complete all as specified and directed.
S&F CNC Cut design as approved by GE at 18 mm thick WPC sheet, factory made, masure free, water proof, external uses fixed to WPC frame work at vertival and ceiling as required as site with stainless Steel screw full body threaded/butt hinges of required size over suitable multi coat of high-water resistance and is very durable, glosy deco paint as per direction of Engineer -In-Charge, and as per drg/ picture complete all as specified and directed. Note : Frame work shall be measured and paid separately
S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and nontoxic additives ( max toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr in charge complete all as specified and directed. Note: For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e., depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made.
Dismantling of PVC wall/ceiling panel of any type and shape with frame work and prepared the surface complete all as specified and directed.
S&F PVC Fluted Wall/ ceiling panel of size 125x 25mm square and 3mm thick holow tongue and grove type of multi colour as directed by GE for commercial uses panel suitably placed in wall/ceiling with furring channel grid @ specing 300mm c/c fied to wall/celing with ss screw and plug complete all as specified and directed.
S&F PVC 3 to 5 mm thick Wall/ ceiling panel square and 0.9mm thick holow tongue and grove type of multi colour as directed by GE for commercial uses panel suitably placed in wall/ceiling with furring channel grid @ specing 300mm c/c fied to wall/celing with ss screw and plug complete all as specified and directed by Engg in charge.
S&F UV marble panel of 6 to 8 mm thick for wall/ceiling of multi colour as directed by GE for commercial uses panel suitably placed in wall/ceiling with furring channel grid @ specing 300mm c/c fied to wall/celing with ss screw and plug complete all as specified and directed.
S&F 5-6 mm thick ACP plain sheet in verious colour for exterior use including aluminium frame work with clits, screw with with MS frame 40x25x1.8mm thick @ 900x900mm incl aplying two coats of synthetic enamel paint over a coat of red oxide prime with preparation of new MS frame complete all as specified and directed.
S&F 16MM thick fluted WPC plain/ design sheet in verious colour for exterior use including aluminium frame work with clits, screw with with MS frame 40x25x1.8mm thick @ 900x900mm incl aplying two coats of synthetic enamel paint over a coat of red oxide prime with preparation of new MS frame complete all as specified and directed.
S&F plain/ tiny holes white Calcium Silicate Ceiling Tiles of size 595x595x6mm, Fire Resistance, Light Reflectance more than 80%, Thermal Conductivity, Humidity Resistance, less weight not more than 5 Kgs/m2 as in false ceiling ith staples on snap grid complete all as specified and directed.
S&F Powder coated aluminium snap gridframe work for false ceiling of size 600x600mm complete all as specified and directed. Note: The subject work shall be carried out as per drawings/ concept pictures as and when required during execution and rate of items shall be quoted according and as per direction of Engg in charge. Note: (a) Srl Item No 02.00 to 06.00, 08.00, 09.00, 12.00, 21.00, 22.00, 24.00 to 28.00, 31.00 to 33.00, 36.00, 38.00, 42.00, 43.00, 45.00, 46.00 & 48.00 to 50.00 of BOQ are major items for the subject tender and material in respect of these items shall be procured within one month after placing of work order and produced before Engg in Charge alongwith original purchase vouchers as per direction of Garrison Engineer and shall obtain a certificate from Engg in charge that material in respect of above mentioned items have been submitted in the office of Engg in charge in their safe custody. (b) Materials in respect of Freakishly low declared items if any at the time of acceptance of contract shall be procured within one month after placing of work order and submit the same in the office of Engg in charge alongwith original purchase vouchers in their safe custody and shall obtain a certificate from Engg in charge.
M/S GR construction compony (BID ID -3372936)
vibha associates (BID ID -3380717)
M/S SONU ENTERPRISES (BID ID -3385145)
B S R Enterprises (BID ID -3379424)
J S CONSTRUCTION CO (BID ID -3380167)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .