SPL REPAIR TO BLDG NO P-1096, P-1089 T-841, T-41 AND T-1019 AT MIL STN SGNR

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises.

M&L for 300x600x7/450x350x7 mm thick Premium quality glazed ceramic coloured tiles as in vertical sufaces such as skirting or dado set & jointed in neat cement slurry & joints to be filled with epoxy grout to match the shade of tiles and including 10mm thick backing coat in CM 1:4. complete all as specified and directed.

M&L for Premium quality Non- skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and joint to be filled with expoxy grout to to match the shade of the tiles and including 15mm thick screed in CM 1:6 complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20mm thick (minimum size 55 cms x 55 cms) over cement screed base laid and jointed with Epoxy Grout mixed with pigment to match the shade of the slab including rubbing, mirror polishing including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M&Lfor 18-20mm thick machine cut kota stone slabs as in vertical surfces such as risers of steps over cement screed base laid and jointed with Epoxy Grout mixed with pigment to match the shade of the slab including rubbing, mirror polishing also moulding edges including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

Mirror polishing of existing kota stone flooring after complete rubbing, joint filing, repairing defective piece of kota stone by replacing new one complete all as specified and directed.

M&L for Vitrified Ceramic tiles double charged stain free, premium quality 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and joints to be filled with expoxy grout to match including 15mm thick screed in CM 1:6 complete all as specified and directed.

M&L for granite (Jet Black) work 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, hand wash platform and like laid over and including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm of screed bed in CM 1:6 complete all as specified and directed.

M&L for PCC 1:3:6 (40mm graded stone aggregate) type C2, in foundation filling mass and foundation of posts and struts complete all as specified and directed.

S&F Heat Resistant Terrace tiles (300mm X 300mm X 8-10mm) with SRI (solar refractive index) more than 78 on waterproof and sloped surface of terrace laid on 20mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio 1:1, including providing skirting upto 150mm height along the parapet walls in the same manner complete all as specified and directed.

Dismantling steel sheets (corrugated semicorrugated ,Plain or corrugated steel sheeting,any gauge, thickness etc) sheet in roof covering complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an approved colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an approved colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for rollled mild steel grade FE-410 -W (Gde E-250 quality A as in roof trusses (framed), trussed, purlins, crane gantries , rails and fastenings and heavy bracket framing (beams, tee, angle, channel or flat sections ) including distance peices, cleats etc. complete all as specified and directed.

M&L for steel work in tubular trusses ,channels ,purlines, crange gantries, rails including special shaped washer, plates nuts and bolts, gusset plates, cleats, including necessary drilling etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 icomplete all as specified and directed.

S&F flat iron for wind ties, plates (plain or chequered) channels, posts, square cut or notched (ordinary and counter sunk) forming holes etc Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square head at one end, and screwed the other,or screwed both end to be fitted with washer and one hexagonal/ square nut not exceeding 5cm long and dia of neck 11 to 15mm complete all as specified and directed.

Taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:6) finished even and smooth without using extra cement on brick work/concrete surfaces complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 to brick/concrete wall surfaces finished fair and even without using extra cement complete all as specified and directed. (Note: Work is to be carried out upto 10 mtr height.)

M&L for 5mm thick rendering in CM 1:3 on fair faces of concrete surfaces as on ceilings finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new internal surfaces of walls and applying two coat or more of 1st quality acrylic emulsion (ready mixed) having VOC content less than 50 gms/Litre, of approved manufacturer, required shade and colour as per manufacturers specification over and including 1.00mm thick wall care putty and interior acrtylic primer all as specified and directed.

M&L for preparation of new external plastered surfaces of walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/Litre and UV resistance as per 15489: 2004 , Alkali resisstance exterior paint of required shade (Company depot tinted) with silicone additives @1.43 litre/10sqm over and including 1.00mm thick wall care putty and one coat of exterior primer applied @0.90 Litre/10 Sqm complete all as specified and directed.

M&L for preparation of old external wall surface including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and removing all dirt and dust by watering making surface even and smooth and applying 1.00mm thick wall care putty and two coats of 100% premium acrylic having VOC less than 50gm/Litre and UV resistance as per 15489: 2004 , Alkali resisstance exterior paint of required shade (Company depot tinted) with silicone additives @1.43 litre/10sqm over and including one coat of exterior primer applied @0.90 Litre/10 Sqm complete all as specified and directed

M&L for preparation of old decorated internal wall surfaces by brooming down or steel wire brushing,scrapping down smoke soot,moulds,moss and efflorescent salts and trading oil and greasy spots and applying two coat or more of 1st quality acrylic emulsion (ready mixed) having VOC content less than 50 gms/Litre, of approved manufacturer, required shade and colour as per manufacturers specification over and including 1.00mm thick wall care putty and interior acrylic primer all as specified and directed..

M&L for preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all specified and directed.

M&L for preparation of old decorated ceiling surfaces and applying two coats of white wash complete all specified and directed.

M&L for 40mm thick cement concrete type B-1, 1:2:4 using 20mm graged aggregate as in flooring , finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, ACinsulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets & snap grid of any description complete all as specified and directed.

M&L for hollow PVC wall lining lourver (premium quality) type consisting 23mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site any type frame as per specification and drawing complete all as specification and as directed.

M&L for anodised aluminium snap grid frame work for false ceiling including Gypsum Board 8-10mm thick in ceiling fixed with hangers 3 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long screw as per manufacturers instructions complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not other wise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L for TMT bar 10 mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for TMT bar 6 to 8 mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

S&F in repair 20 mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair 15 mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair chromium plated stop valves, cast copper alloy 15 mm bore screwed down high pressure with quarter turn type handle for iron pipe or for union and complete all as specified and directed.

S&F in repair chromium plated Angle stop valves, cast copper alloy 15 mm bore screwed down high pressure with quarter turn type handle for iron pipe or for union and complete all as specified and directed.

S&F in repairs chromium plated 15mm bib taps (half/quarter turn) cast copper alloy, chromium plated fency type with quarter turn type handle screwed down screwed for Iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F CP gratings 100 mm dia of fixed in repairs (premium quality) complete all as specified and directed.

Taking up or down GI steel water tubing 15mm bore and connections including fittings from floor/walls/ceiling complete all as specified and directed.

Taking up or down GI Steel water tubing 20mm bore and connections including fittings from floor/walls/centrings complete all as specified and directed.

Fixing only tubes of 15mm bore any grade (medium) with new fittings as required to walls and ceilings or laying in floors complete all as specified and directed.

S&F Galvanised steel water tubing 15 mm bore medium grade with all fittings concealed including cutting chases to brick wall/ceiling or laying in floors and making good complete all as specified and directed.

Fixing only tubes of 20mm bore any grade (medium) with new fittings to walls and ceilings or laying in floors complete all as specified and directed.

S&F GI steel water tubing 20mm bore medium grade with all fittings and fixed complete to walls ceiling or laid in floors complete all as specified and directed.

Dismantling water tanks any type exc. 500 ltr but n exc 1000 ltr complete all as specified and directed.

Dismantling water tanks any type exc. 250 ltr but n exc 500 ltr complete all as specified and directed.

S&F 1000 Litre capacity Rotational moulded polyethylene water storage tanks Triple layered White coloured (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete all as specified and directed.

Supply and fixing ball valves high pressure of brass type with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed for bore dia of pipe 20mm.complete all as specified and directed.

Dismantling brick work built in cement mortar of any description complete all as specified and directed.

M&L for brick work with burnt clay bricks sub class 'B' bricks (old size) straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed.

All as per Sl item No 53 above but except bricks. Note : Serviceable bricks obtained from dismantling shall be re-used in the work after cleaning.

M&L brickwork with fly ash bricks (old size), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

All as above Sl item.No 55 above but except bricks complete all as specified and directed. Note : Serviceable bricks obtained from dismantling shall be re-used in the work after cleaning.

M&L for brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 including every 4th layer to be reinforced with two 8mm TMT bars complete all as specified and directed.

Demolition concrete in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75 mm thick cement concrete type D2, 1:4:8 (Using 40mm graded stone aggregate) filling sub base as in floors, paving, sub floor etc finished fair and even complete all as specified and directed.

M&L for cement concrete 1:2:4 type B0 (using 12.5mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges or filling undulations of roof complete all as specified and directed

M&L for 25mm thick cement concrete flooring type B0, 1:2:4 using 12.5 mm graded aggregate finished even to receive interlocking tile and sand cushioning complete all as specified and directed.

M&L for sand filling (25mm thick) under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for 60mm thick (M-35 grade) Machine pressed precast rubber moulded concrete coloured interlocking paver block any shape and size confirming to IS 15468-2006 with grey cement and pigment complete all as specified and directed.

M&L providing precast cement concrete in PCC (1:2:4) type B-1 with 20 mm graded aggregate for kerb stone and similar works with plain fair finishes including chamfers, weatherings, throating etc. and setting in mortar (1:4) complete with joints to match complete all as specified and directed.

S&F in repairs colured 30 cm x 30 cm x 10 mm thick Non skid (Hi Traffic grip tiles) set jointed and pointed in neat cement slurry in floors over 20mm of screed bed in CM 1:4 including coping at edges in PCC Type B-0 (1:2:4) complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exceeding 1.5 sqm but not exceeding 4 sqm each complete all as specified and directed.

All as per Sl item No 66 above but size not exceeding 1.50 Sqm each

Taking down steel window / ventilators of any description and size complete all as specified and directed.

S&F central hole wash basin mixer 15mm bore brass without polp up waste with 10mm dia 450mm long copper pipes. complete all as specified and directed.

S&F in repairs stainless steel curtain rod 25 mm dia (minimum weight 0.36 Kg per RM) with brackets, fancy knobs and rings (20 cm c/c) etc complete all as specified and directed.

S&F and shower health faucet to EWC, CP brass with minimum 1000mm long CP flexible pipe, connection etc., complete all as specified and directed.

S&F in repairs cabinet of PTMT with looking mirror of size 350x555mm complete all as specified and directed.

S&F towel Ring of aluminium fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms) complete all as specified and directed.

S&F sheet glass shelf assembly/corner shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long bu with aluminium alloy brackets and guard rail complete all as specified and directed.

Taking down eaves gutters and rainwater pipes,PVC (SWR) pipes ( any size or pattern ) including all fittings heads ,shoes, bends, and removal to store complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls/laid in trenches including necessary scaffolding upto the height of building from ground level complete all as specified and directed.

S&F 110 mm dia PVC (SWR) bend with oval access door complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipes jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

M&L for 100mm dia cast iron sand cast waste and vent pipes in any length with or without ears with cement jointed fixed to wall/laid in trencehs complete all as specified and directed.

M&L for 75mm dia cast iron sand cast waste and vent pipes in any length with or without ears with cement jointed fixed to wall complete all as specified and directed.

M&L for 100mm dia cast iron Bends complete all as specified and directed.

M&L for 75mm dia cast iron Bends complete all as specified and directed.

S&F vitreous china premium/1st quality wash basin (under counter), white/ivory/off white, size 580x430 mm including S&F all accessories as recommended by manufacturer and including CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling and complete fixed in position in all respect as per manufacturer's instructions and taking down existing of any description/size complete all as specified and directed.

S&F Toilet paper Holder with flap CP brass complete all as specified and directed.

S&F in repair 10 ltr capacity low level PVC valveless, syphonic action type flushing cistern(dual system), white, with inlet, ball valve, flush pipe, PVC connection 15 mm dia and 450 mm long float and handle including bracket complete all as specified and directed.

S&F in repairs vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified and directed.

S&F vitreous china premium/1st quality wall hung water closet with P trap white/ivory/off white, concealed flushing cistern including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc., and incl. plastic seat cover as recommended by manufacturer for particular model closed pattern with flat bottom etc; and incl S&F of all necessary accessories set like rag bolts/gel gasket/hinges etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete all as specified and directed.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of but of Frame size 65x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. (M.S. hold fast/ lugs or SS dash fasteners shall be not paid separately) Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing stainless steel butt hinges of required size, with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge complete all as specified. Rates of following items are included : (i) Tower bolts 250mm long of stainless steel 304 finished/of outer plate metal matt finished. (ii) D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 200mm long matt finished. (iii) Butt hinges of size 75mm of stainless steel 202 Grade finished/of outer plate metal.

S&F powder coated aluminium windows and ventilator shutters, side hung type, without sash bars aluminium saction weighing 0.55 kg/RM including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fitting such as peg stay 150mm long (1 no) hinges type B21 100 mm long (2 No) suitable handle (1No) complete all as specified and directed.

M&L anodised aluminium frames for doors, windows with one or moe rebates including jointing cleats for fixing etc, necessary joining cleats, sliding channel, wheels, star lock, glazing clips, ruber neoprene packing including power coating minimum thickness of power coating shall be 50 micron as per the specification) complete all as specified and directed. (Note : Rates of taking down are included.)

S&F powder coated aluminium window shutters (side hung/sliding), aluminium partition and similar/window/ ventilators, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, including Adequate No of handles in each door, hinges, powder coated aluminum snap beading screws, sliding channels, wheels, cleats etc. and aluminium grill with mesh complete all as specified and directed. (Note : Rates of taking down are included.)

S&F Powder coated aluminium door shutter, aluminum section weighing 0.55 kg/m including necessary jointing cleats glazing clips, rubber neoprene packing , handles 2 Nos in each door , SS hinges powder coated snap beading screws etc complete all as specified and directed.

S&F Anodised aluminum grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15 ) of approved design /pattern, with approved standard section and fixed to the window /door with C.P brass/SS screw @ 200mm centre to centre , including cutting the grill to proper opening size for fixing and operation of handles complete all as specified and directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F Aluminum extruded section hydraulic door closer designation No 2 , universal type for door shutter upto 850mm and wight of door upto 60 Kg complete all as specified and directed.

S&F factory made white colour 3- TRACK UPVC SLIDING WINDOW are made of UPVC extruded profiles with wall thickness of 2.3 mm ( + 0.2 mm ), Window profile with hollow section with multi chamber, Frame ( 122 mm x 54 mm ), Sliding Glazed sash ( 80 mm x 47 mm ), Mesh sash ( 64 x 47mm ) Sliding interlock ( One vertical length in each shutters ) ( 43 mm x 50.5 mm ), Glazing bead ( 29.5 mm x 21.8 mm ) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket,1.5 mm (+ 0.2 mm) thick, galvanized steel in Frame 2nos.,Sliding sash and Sliding mesh sash to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners. complete all as specified and directed.

Supply and fixing factory made uPVC white colour Three track three panels sliding door with fly proof S.S. wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 122 x 54 mm & sash 47 x 80 mm both having wall thickness of 2.3 + 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) comprising of uPVC chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.50 + 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required). stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fastener 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed.

M&L for factory made UPVC white colour casement/casement cum glazed/panelled partition comprising UPVC Multi chambere frames, sash and mullion (whereever required) extruded profiles dulyreinforced with 1.50 + 0.2 mm thick galvanised mild steel section made from roll forming process of required length (shape & size according to UPVC profile) , UPVC extruded glazing beads of appropriated dimension, EPDM gasket, stainless steel (SS 340 grade) frictiion hinges, zinc alloy (white posder coated) casement handles, G.I fasterners 100x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless stell screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners , mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and draingage of water etc. After fixing frame the gap between frame and adjacent finised wall shall be fillied with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed. Note : Casement fixed panel partition having casement fixed panel, middle fixed panels as glazed panel of required type and thickness and at top completely fixed panel with made of (big series) frame 67 x 62 mm & mullion 67 x 78.4 mm all having wall thickness of 2.3 + 0.2 mm and single glazing bead/double glazing bead of appropriate dimension.

M&L for Roof treatment to RCC roof as follows :- (a) Dismantling of brick tiles or terracing tiles single layer on roof including mud phuska (b) Taking down existing APP membrane including lime concrete & disposal of retrieved material upto a distance n.exc 100m where directed (c) Cleaning the roof surfaces thoroughly using wire brushes to remove and apply 15mm th plaster in CM 1:3 with WPC (d) preparation of roof top surfaces, providing and applying single component a fibre reinforced elastomeric liquid applied as waterproofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibres and having Sun reflective index (SR) of 106 on top of concrete roof surfaces in three coat including self primer at ratio of elastomeric liquid and water as per manufacturer's instruction and coverage @1 Ltr/10 Sqm with a thickness of 650 micron, the vital physical and chemical parameters shall be as under Min Elongation at break of 350%, Results positive hydrostatic pressure of upto 10 bars, crack bridging ability of 2.5mm at 650 microns. The materials shall be applied with brush or roller, complete in all respect as per the direction of Engineer-in-Charge/Consultant. 06 Hrs interval between two coats will be maintain and the work will be carried out and will be paid only after receiving of the Waranty Certificate from the Company. Note : The work will be carried out by authorised applicator of the manufacturer as approved by GE. The contractor will obtain documents of applicator from the manufacturer and will submit to GE for approval well before execution of work.

M&L for providing Reinforced cement concrete Design Mix M-25 as in slabs supported on walls , beams and columns in floors, roofs landings ,balconies , canopies ,deck slab and in shelves complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs , floor slabs , landings, chajjas and similar work not exceeding 200mm thick all as specified and directed.

M&L providing reinfoced cement concrete Design mix M-25 as in chajjas etc and similar work complete all as specified and directed.

M&L providing reinfoced cement concrete Design mix M-25 as in beams , cantilevers , bresummers , lintels over 1.5 span or similar work complete all as specified and directed.

M&L for form work to sides and soffits of floor or roof beams , beam haunching, girderss , bressummers, lintels, cantilevers , shelves including supports , over hangs, etc, .also splays between floors and beams etc. Complete all as specified and directed.

M&L providing reinfoced cement concrete Design mix M-25 as in columns , pillars ,piers ,posts and struts or similar work complete all as specified and directed.

M&L for formwork to sides of columns ,pillars, struts , piers , posts and stanchions complete all as specified and directed.

M&L for 5mm thick plain coloured PVC Sheet inclusive of solvent cement and fixing at site on PVC frame all as specified and directed.

M&L for 5mm thick PVC sheet fitted of width 35mm for wall panelleing inclusive of fixing on to wall to make PVC frame complete all as specified and directed.

M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

S&F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F factory made 35mm thick shutter, plain, framed, panelled shutters factory made (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats. complete all as specified and directed.

S&F Second class hard wood glazed and skeleton Door, window shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc divided into squares with plain, chamfered or rounded mitred and rebated sash bars any number & fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, section 8 clause 8.24 (a) complete all as specified and directed.

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters and refixing in the same opening or any othe opening after easing and repairing complete all as specified and directed.

Taking down shutters of any description n exc 1 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but not exc 2 sqm each complete all as specified and directed.

S&F 75mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type C-21 complete all as specified and directed.

S&F 125 Stainless steel 304 finished barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 100mm long butt hinges, heavy weight, cold rolled Stainless Steel complete all as specified and directed.

S&F aluminium handle cast type anodised, 150mm long complete all as specified and directed.

S&F 300mm long Stainless steel 304 finished sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

S&F Stainless steel 304 finished barrel tower bolts of 200mm long complete all as specified and directed.

S&F 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F Mortice lock vertical type size 100mm of Brass 4 levers to existing doors complete all as specified and directed.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick sorrounds, glazed with oil putty or fixed with beads complete all as specified and directed.

S&F 4mm thick figured glass, pin head type and glazing with oil putty or fixed with beads in suqares n.exc 0.5 Sqm in each pane complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F in repairs vitreous china wash hand basin white flat back of size 550mm X 400mm, fixed with a set of cast iron brackets including cutting and pinning in ends of brackets to wall, provision of 15mm size pillar tap, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter "Hot or cold'' with long scrwed shanks and fly nuts, 32mm dia brass chromium plated waste fittings 450mm long PVC connection of 15mm size with PTMT nuts and 40mm dia waste pipe complete all as specified and directed.

S&F wall mounted swan neck sink cock 15mm dia cast copper alloy with quarter turn lever type handle chromium plated screwed down high pressure with long screwed for iron pipe of 15 mm dia, complete all as specified and directed.

S&F drapery curtain rod 25mm dia, fancy type, fabricated out of stainless steel steel sheet not less than 20 guage, including SS brackets and pair of SS decorated end knobs (finials), SS stop roller etc, complete all as specified and directed. (Note : 02x Nos SS Brackets, 02 Stainless steel knobs (finials), 02 x S/S stop roller for each curatin rod to be provided.

Excavating post holes (or similar holes) each n.exc. 0.5 cum getting out returning filling, in and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm including watering and removing surplus soil to a distance n.exc. 50m and making good surface in soft loose soil complete all as specified and directed.

S&F in repair stainless steel sink with drainage board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm including waste coupling,waste pipe complete all as specified and directed.

S&F in repairs stainless steel sink made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F expanded metal n.exc 4Kg per sqm, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and directed.

S&F Stainless steel (Grade-304) plate rack 1200mm x 1200mm x 270mm thickness of frame square hollow pipe and 3mm dia wired partitions for plates 3 tier complete all as specified and directed.

M&L for providing and fixing stainless steel (Grade 304) railing/racks/articles made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing/racks with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab or walls with suitable arrangement complete all as specified and directed.

M&L for 75mm thick cement concrete type C-1, 1:3:6 using 20mm graded stone aggregate as in plinth protection complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm long complete all as specified and directed.

S&F in Prelaminated HDHMR board,19 mm thick premium quality, prelaminated both side with decorative choice lamination at one side & other side balancing white lamination including lipping/beading at edges, fixed with screws to timber frame work/steel frame including sliding platform , paino hinge sand wheels complete all as specified and directed.

Mild steel, plain, black sheet 1.00 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws , clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with rivetted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

M&L decorative laminate (Sunmica) type 1, 0.9mm thick of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

M&L Premium quality Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with SS screws to timber frame work 12mm thick 7 layer, fixed with screws to timber frame work complete all as specified and directed.

S&F (6 piece 17x20X4, 17X20X6, 17X20X8) stainless steel wire modular kitchen basket (6 piece 17Wx20D inches basket and 6 set 20 inch telescopic Channel) complete all as specified and directed.

S&F stainless steel 3 tier bottle drawer, multipurpose utensils holder, tripple pullout basket, 3 shelf modular kitchen rack, complete all as specified and directed.

S&F decorative auto soft close steel hinges for upto 25mm thick door/kitchen cabinet etc complete all as specified and directed.

S&F magnetic catch of PVC body incl striking plate complete all as specified and directed.

S&F brass handles, cast type, polished bright 100mm long complete all as specified and directed.

Taking down carefully aluminium point wiring (light, fan, socket or power, bell complete fitting such as sockets, ceiling roses, pendants, batten holders, regulators and making good the disturbed surfaces of wall, floors, ceiling in CM 1:3 etc complete all as specified and directed.

M&L for concealed conduit point wiring complete for light/ fan on independent /combine board with cable 1.5 sqmm (Nominal area) FRLSH PVC insulated multistranded unsheathed copper conductor, drawn in and including PVC Concealed conduit pipe medium grade 20 mm dia, pipe hooks , elbows, juction covers and junction boxes , after cutting in wall chasing for conduits and sinking's for Sunken cast iron prossed steel terminal boxes suitably length and thickness for mounting switch, sockets, fan regulaor with 3mm thick plastic laminated sheet cover fixed with brass screwed and cup washer duly grouting and painted with red oxide metal primer and making the good disturbed surfaces of wall in CM 1:3 with white wash or existing colour including provision of continuous earth continuity conductor along with point wiring of 1.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switch and connected to common earth dolly, complete all as specified and direced.

All as per Srl item No 156 here in before but for one switch socket combination 5/6 amp on independent board complete all as specified and directed.

All as per Srl item No 156 here in before but for one three pin socket outlet 5 Amps on same board with other switches complete all as specified and directed.

All as per Srl item No 156 here in before but for one switch socket combination 6 pin 5/15 Amps on independed board with copper conductor 2.5 sqmm alongwith 2.5 sqmm earth contunity conductor complete all as specified and directed.

S&F switch piano flush type 5/6 Amp single pole one way, one module complete all as specified and directed.

S&F switch socket combinatin 5 pin, type 5/6 Amp flush type complete all as specified and directed.

S&F switch socket combinatin 6 pin, type 5/16 Amp flush type complete all as specified and directed.

S&F socket outlet 5 pin 5 Amps flush type complete all as specified and directed.

S&F Single pole and neutral enclosure with a two pin and earth plug and socker (industrial socket metal clad) complete all as specified and directed.

S&F in replacement industrial socket metal clad plug and socket with MCBs single pole 20 Amp complete all as specified and directed.

S&F in replacement stepped type, electronic fan regulator flush type for ceiling fan 1200/1400 sweep complete all as specified and directed.

S&F ceiling rose surface bakelite three terminals complete all as specified and directed.

S&F in replacement of existing light fitting with LED batten with aliminium housing and integrated electronic driver, 20 watt having input voltage AC140-300V, 50 Hz , 6500K, and all other accessories including connection with flexible cable copper conductor twin core of size 23/.2 mm upto ceiling rose/connector complete all as specified and directed.

S&F in replacement of existing light fitting with LED batten 20 W LED batten with 'Eye Soft' technology & glare free diffuser for perfect application in modern homes or aluminium housing and inetgrated electronic driver, 20 watt having input voltage AC 90-300V, 50Hz, 6500 K, and all other accessories including connection with flexible cable copper conductor twin core of size 23/.2mm upto ceiling rose/connector complete all as specified and directed.

S&F in replacement compact and decorative energy efficient LED mirror light fitting with antiglare diffuser and decorative end caps suitable for 1X10 watt fitting 2 ft version including LED lamp 10 watt complete all as specified and directed.

S&F Decorative wall mounting, made of polycorbonate suitable for 9W led lamp, B22 base complete all as specified and directed.

S&F in replacement of security light fitting LED TYPE 25 watt with all necessary acessories, Clear transparent acrylic cover, prewire suitable to operated on 230 volt 50 HZ AC & Supply and fixing to wall / on pole including fixing arrangement with suitable galvanized iron pipe 35 mm bore “light grade” brackets 2 mtr length bent to shape to obtained required shape including clamps, nuts / bots / washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed.

S&F angle holder insulated body with back plate for conduit fittings complete all as specified and directed.

S&F LED lamp 9W for angle holder complete all as specified and directed.

S&F LED light fitting 1x9W/1x10W bulkhead luminaries including LED light driver holder connection up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F Decorative wall light fixture made up of Polycarbonate suitable for 9 W retrofit LED lamp B22 base complete all as specified and directed.

S&F in replacement of sub-main wiring with two single core cables PVC insulated and un-sheathed 6.00 sqmm (Nominal Area) FRLSH stranded copper conductor drawn in existing PVC conduict including 6.00 Sq mm (Nominal Area) copper cable as earth continuity conductor after chasing in wall and making good the disturbed surfaces and white wash or existing colour, necessary junction box and covers including necessary connections, PVC flexible pipe are used in pannel board while connection the cable complete all specified and directed. (Note : PVC cable and PVC conduit shall be ISI marked) (Note : Four length of 6 sqmm cable and two length of 6 sqmm earth cable along with PVC conduit will be measured as one running length)

S&F in repairs sheet metal enclosure for double door DBs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N 8 ways, 240 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed.

S&F in repairs sheet metal enclosure for double door DBs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N 12 ways, 240 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed.

S&F in repairs sheet metal enclosure for double door DBs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted VTPN 4 ways, 415 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof, IP:43 protection suitable for incorporation FP MCCB (V-Tech) N3 Frame upto 125A, isolators and including give connection with wire and cable etc complete all as specified and directed.

S&F in repairs MCB ‘B’ series type suitable for 240 volts, AC supply 5 to 40 Amps, S P & N with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed.

S&F in repairs MCB ‘B’ series type suitable for 240 volts, AC supply 5 to 40 Amps, single pole with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed.

S&F in repairs MCB ‘C’ series type suitable for 240 volts, AC supply 32 Amps, S P & N with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed.

S&F in repairs MCCB TP&N 63 Amps with breaking capacity 16 KA, Fixed TM and 415 volts AC Supply ISI marked complete all as specified and directed.

M & L for Earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level ) with top edge of plate not less than 1.5 Mtr below ground level , connecting to GI earth lead 4 mm dia GI earth wire ,by means of bolts,nuts and washers of GI and protection by provision of GI medium grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4) type B1 using 20 mm grade stone aggregate with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 gs /Sqmm ) and frame of angle iron 25mmX25mmX6mm with lugs 02 Nos and with 6 mm dia MS bar handle made to shape ,GI light grade 20mm bore pipe for watering perforated at the bottom 1.75 meter long placed ontop edge of earth plate common salt and charcoal filling test point made out of 40 mmX 8 mm FI with fixing arrangement ,funnel, wire mesh and earth work inhard dense soil ,returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electric plate no.3 of SSR part 1 and connecting to earth test point including taking out unserviceable earthing with all acessories all as specified or indicated including testing on completion all as specified and directed.

S&F heavy duty metal body exhaust fan of 450mm sweep, 240 volt, complete with louvers and shutter and mounted in suitable opening arrangement in wall and connecting up including 3 core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm from ceiling rose to fan complete including breaking of brick wall and making a hole for fixing of exhaust fan includign grouting of bolts and making good to disturbed wall in CM (1:4) white washing matching with existing color all as specified and directed.

Supply, layying, jointing and testing and commissioning in replacement of 16 Sqmm x 2 core XLPE insulated, screened , PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor & PVC sheathed LT cable 1100 V grade conforming to IS-7098 laid in trenches/ducts/fixed on poles wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed.

Supply, layying, jointing and testing and commissioning in replacement of 25Sqmm x 4 core XLPE insulated, screened , PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor & PVC sheathed LT cable 1100 V grade conforming to IS-7098 laid in trenches/ducts/fixed on poles wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr in depth for laying of cables in soft/loose soil etc complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25cm complete all as specified and directed.

Removal of Excavated material n exceeding 50 mtr and depositing where directed complete all as specified and directed.

Supply and filling in Sand for Cable protection complete all as specified and directed. Note : Punned thickness shall be measured and paid.

Supply and lay PCC block Class LV, Type I, flat size 250mm x 150mm x 40mm complete all as specified and directed.

Supply and lay standard size bricks sub class B as in cable protection complete all as specified and directed.

Supply and laying GI pipe 50 mm light grade for cable protection in walls trenches or any situation including clamp nut bolt etc complete all as specified and directed.

Taking down fan, ceiling cable end, dismantling blades and removing fan and blades to store complete all as specified and directed.

M&L for Painting of ceiling fans complete in situ with syntehtic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust complete all as specified and directed.

Hanging only ceiling fan (M.D. supply) and connection up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.

Taking down repiar to refixing steel body exhaust fan of 450mm sweep 240 volt 5 star rating complete all as specified and directed.

Supply, fixing, testing & commissioning of electric chimney (90 CM) with feature of filterless & autoclean technology oil collector tray, inbuilt light, digital display, noise level, 46 dB, 304W motor capacity with copper winding, extra installation kit, air suction capacity 1400 cum/h, input vol 220-240 V/50Hz, and fitting in wall as connected or duct complete all as specified and directed.

Supply an fixing of MS powder coated fly cathcers machine with dimensions (L 24.5" x D 5.5" x H 17") light source philips actinic UV tubes (two tubes), capacity of 18 watt each of tube complete all as specified and directed.

S&F in replacement recess mounting 2x2 feet 36 watt LED luminaire with powder coated CRCA housing with LEDs, seamless front frame with high transmission acrylic cover and fixed electronic driver (surge protector) complete all as specified and directed.

PAREEK AND COMPANY (BID ID -3187118)

KHANNA CONSTRUCTIONS (BID ID -3193481)

M/s Chopdar Builders (BID ID -3187128)