COMPREHENSIVE REPAIR/REPLACEMENT OF ROOF TREATMENT INCLUDING REPAIR TO OTM/MD ACCN AND MISC B/R WORK TO JCOS/OR/CIV MD ACCN AT MTRC LINE, TRIVENI VIHAR AND RA LINES UNDER AGE BR-I AT NEW CANTT UNDER GE (WEST) PRAYAGRAJ.

Amount

Demolition of brick work built in cement mortar of any description including all quions arches, pillars, etc complete all as specified and directed.

Taking down cement plaster on brick or stone walls incl wall tiles etc. with raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed

M&L for brickwork with sub class B bricks (old size), straight or curved on plan exc 6 m mean radius, built in cement mortar 1:4 complete all as specified and as directed

M&L for half brick work with fly ash bricks straight or curved on any radius built in CM 1:4 complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces complete all as specified and directed

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces complete all as specified and directed

M&L for rendering 10mm thick in CM 1:3 on ceiling surfaces of RCC or brick complete all as specified and directed.

Preparation of newly plaster surface of wall and applying two coats of oil bound distemper over a coat of 1mm thick wall care putty with paint sprayers complete all as specified and directed.

Preparation of newly plaster surface of wall and applying two coats of cement base paint including one coat of primer complete all as specified and directed.

Preparation of newly plaster surface of ceiling and applying two coats of white wash complete all as specified and directed.

Demolition of cement concrete including floor tiles or stone in any description and any position etc removal from site and complete all as specified and directed

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations compete all as specified and as directed.

M&L for PCC 1:4:8 type D2, using 40mm graded crushed stone aggregate, as in foundation filing of manhole/ sumps,sub base etc complete all as specified and as directed.

M&L for 75 mm thick cement concrete 1:3:6 type B2 using 20 mm graded crushed stone aggregate in plinth protection finished even and fair including necessary form work and cutting of joints using extra cement etc complete all as specified and as directed.

M&L RCC type B-1 1:2:4 using 20mm graded crushed stone aggregate as in kitchen shelves etc including demolition of old slab complete all as specified and directed.

M&L form work to suspended slab as in kitchen shelves etc complete all as specified and directed.

M&L TMT bar 10 mm dia and over, cut to length, bent to shape required ,including cranking ,bending spirally for hooping for columns,hooking end and binding with and including mild steel wire and annealed not less than .9 mm dia or securing with clips complete all as specified and directed.

Demolition of plain cement concrete in any position including tar felt & cement mortar bedding etc from roof or sunken complete all as specified and directed.

Complete removal of mud phuska from roofs of any thickness and removing the waste material from site to a distance exc. 250m but not exc. 500m and deposited where directed including cleaning of surface complete all as specified and directed.

Dismantling of brick tiles or terracing tiles, single layer on roofs complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-0 (12.5mm graded crushed stone aggregate) as in roof padding,roof kerbs, benching on roof slab and other similar works laid as per slop required finished even and fair complete all as specified and directed.

M&L for 10mm thick plaster in CM 1:3, mixed with liquid water proofing compound over concrete surface of roof when concrete is green complete all as specified and directed. Note :- WPC to be mesured and paid separately under paaropriate item.

Cleaning the dust,dirt and any other foreign material from roof surface and applying a coat of bituminous primer @ 0.40 ltr / Sqm uniformily and primer shall be allowed to dry over night as conforming to IS 3384-1986 complete all as specified and directed.

M&L for Laying of minimum 3mm thick APP membrane of (reinforced with non-woven fabric polyester type wt not less than 150 gms/sqm) & minimum weighing 3kg/sqm shall be done using butane torch maintaining 100mm side overlap and 150mm end overlap,sealing all overlaps and bonded to the surface by fusing and bonding torchon method complete all as specified and directed. Note:- All water proofing work shall be done as per manufacturer instruction and under supervision of manufacturer technical representative.

Supply only Liquid water proofing compound (ISI marked) complete all as spesified and directed.

M&L for 40mm thick brick tiles laid over and including 15mm thick screed bed in CM 1:4 mixed with polymer based liquid water proofing additive @ 5 % by weight of cement or as per manufacturer's instruction and the joints of tiles shall be filled with CM 1:3 mixed with crude oil as per SSR-2009 (Part-I) on non assesible roof area complete all as specified and directed.

M&L for 40mm thick brick tiles (Except TIles) laid over and including 15mm thick screed bed in CM 1:4 mixed with polymer based liquid water proofing additive @ 5 % by weight of cement or as per manufacturer's instruction and the joints of tiles shall be filled with CM 1:3 mixed with crude oil as per SSR-2009 (Part-I) on non assesible roof area complete all as specified and directed.

Supplying and applying high build elastomeric waterproofing coating based on pure,hydrophobic polyurethane,cold applied of spray/brush applied, smartcare PU Magnum membrane with an elongation of 550% and tensile strength of 3 N/mm2 as per ASTM D 2370,crack bridging ability of 3.5 mm as per ASTM C1305,no leakage upto 7 bars of water pressure as per DIN 1048,shore A hardness of min.45 as per ASTM D2240.Thr system includes final base preparation ,epoxy primer application and applying smartcare PU Magnum or approved equivalent in two coats with a consuption of 1.5 kg per sqm on a primed surface with smartcare primer and a 40 GSM geo textile cloth sandwiched in between etc complete as per manufactures specification.

Cleaning and removing all scale and dirt etc from water tanks, Exc 250 & n exc 500 ltrs and from mouth of circulating pipes etc complete all as specified and directed.

Cleaning and removing all scale and dirt etc from water tanks, Exc 500 & n exc 1000 ltrs and from mouth of circulating pipes etc complete all as specified and directed.

S&F of rotational moulded polyethylene water storage tank of capacity 500 ltr (Cylindrical/vertical with closed top) double layer construction, ISI marked hoisted & fixed in position provided with all connections like inlet, outlet & pver flow pipe including dismantling of old tank and removing from site complete all as specified and directed.

S&F of rotational moulded polyethylene water storage tank of capacity 1000 ltr (Cylindrical/vertical with closed top) double layer construction, ISI marked hoisted & fixed in position provided with all connections like inlet, outlet & pver flow pipe including dismantling of old tank and removing from site complete all as specified and directed.

S&F in repair ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20mm bore minimum weight 210 gms complete all as specified and directed.

S&F in repairs WC squatting pan “Orissa Pattern” of size 580mm x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including 'P' or 'S' trap complete all as specified and directed.

S&F in repair vitreous china wash and basin, white, flat back, size 550 mm x 400 mm fixed on existing bracket, fixing of tap, waste fitting,pipe and union complete all as specified and directed.

S&F in repair PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including ball valve float & handle, waste pipe & brackets complete set all as specified and directed.

S&F in repair PVC connection 450 mm long, 15 mm size with brass chromium plated nuts complete all as specified.

Taking up or down 15 mm bore GI steel tubing and connections on (walls, ceiling, floors, etc.) including cleaning complete all as specified and as directed

Refixing old 15 mm bore GI steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) with & including new fitting, complete all as specified and as directed

S&F 15 mm bore GI steel tubing "medium grade" with all fittings and fixed to wall, floor and ceiling etc complete all as specified.

Taking up or down 20 mm bore GI steel tubing and connections on (walls, ceiling, floors, etc.) including cleaning complete all as specified and as directed

Refixing old 20 mm bore GI steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) with & including new fitting, complete all as specified and as directed

S&F 20 mm bore GI steel tubing "medium grade" with all fittings and fixed to wall, floor and ceiling etc complete all as specified.

S&F in repair for 15mm bore bib taps chromium plated with crutch or butterfly handle ,screwed down , screwed for iron pipes or brass ferrule complete all as specified and directed.

S&F in repair 15 mm bore chromium plated fancy type stop valves with long shanks fixed with 15 mm dia bore pipes complete all as specified and directed.

S&F in repair CP angle stop valve or cock of 15mm bore screwed down for high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete all as specified and directed..

S&F in repair pillar taps (swan neck type) cast copper alloy with capstan head, screwed down ,high pressure with long screwed shanks and fly nuts fixed with 15 mm bore pipes complete all as specified and directed.

S&F in repair 15 mm bore CP fancy stop valve (concealed type) with long shanks and cup fixed with pipes complete all as specified and directed.

S&F in repair for 90 to 125 mm size fancy type chromium plated shower rose with swivel joints,and connecting rod including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs toilet paper holder CP fixed to wall with chromium plated brass screw complete all as specified and directed.

S&F in repairs 600 mm long tubular towel rail , brass chromium plated of 20 mm dia complete all as specified and directed.

S&F in repairs Stainless steel grating dome 100 mm dia with or without waste holes as required complete all as specified and directed.

S&F in repair 32 mm bore low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sqcm white in colour fixed in repairs to walls or laid in floors including all fittings such as bend, elbow, tee etc. complete all as specified and directed.

S&F in repair 20 mm dia Stainless steel curtain rod of wall thickness not less than 1mm with both side decorative brakets and fixing brakets complete all as specified and specified.

S&F in repair stainless steel sinks with drainage board of 1mm thick in kitchen or laboratory with plug washers and waste pipe including bedding in cement mortar to dwaft wall or including fixing cantilever brackets and connecting union or waste fitting to pipe over all size 915mm x 460mm bowl size 410mm x 330 mm x 160mm complete all as specified and directed.

S&F in repair stainless steel plate rack (utensil rack) of size 900mm X 750mm X 260mm made out of stainless steel 0.63mm thick fixed with brass screw complete all as specified and directed.

Taking down rain water / vent pipe of any description including fittings etc. including removal to store, complete all specified and directed.

S&F 110 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trences complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.

S&F 110 mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repair PVC (SWR) floor trap plain or multi with stainless steel grating incl joinig to waste pipe with solvent cement joint dia of outlet 75 mm bore complete all as specified and directed.

Dismantling of floor hearth or wall tling including cement mortar bedding (but not backing), removing servicesable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non skid joint free coloured ceramic floor tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.06sqm but n exc 0.11 sqm,in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over & including 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

M&L for non skid joint free coloured ceramic floor tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but not exceeding 0.38 sqm,in floor ,wall etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over & including 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

M&L for glazed ceramic coloured wall tiles in vertical surface 450mmX300mmX7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, fixed over and including 10 mm thick rendering in 1:4 CM complete all as specified and directed.

M&L for 18 to 20 mm thick machine cut kota stone flooring ,laid & jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing finished laid over and including 20 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

M&L for 18 to 20 mm thick machine cut kota stone as in riser of step,dado and skirting fixed over and including 10 mm thick 1:4 CM backing on vertical surface of wall with rubbing and mirror polishing finished complete all as specified and as directed.

M&L 40 mm thick PCC flooring type B1 (1:2:4) (using 20 mm graded crushed stone aggregate) finished even and smooth surface by using extra cement and provided with glass dividing strips complete all as specified and directed.

M&L for 16 to 18 mm thick Granite work (table rubbed and polished) in cooking platforms and similar works in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15 mm thick screed bed in CM 1:4 complete all as specified.

Taking down chowkat with shutter (without taking off shutters from the frame) area not exc 1.5 Sqm each and removing from site complete all as specified and directed.

Taking down chowkat with shutter (without taking off shutters from the frame) exc 1.5 Sqm but not exc 4.0 Sqm each and removing from site complete all as specified and directed.

Taking down shutters of any description not exc 1 Sqm each and removing from site complete all as specified and directed.

Taking down shutter of any description exc 1.0 sqm but not exc 2.0 Sqm each and removing from site complete all as specified.

S&F pressed steel frame for door with one or more rebates size 105mmx60mm including necessary fixing lugs, lock striking plates,hinges,hold fast ,etc. complete size /profile of frame as per IS complete all as specified and directed.

S&F pressed steel frame for door with one or more rebates size 125x60mm including necessary fixing lugs, lock striking plates,hinges,hold fast ,etc. complete size /profile of frame as per IS complete all as specified and directed.

S&F MS framed work as in doors frame,doors or gates of angle iron,door frame or other section with gusset plate, rails, braces etc complete, drilled for fixing of steel sheeting or other covering etc. to prepared for hanging or sliding with including either hooks and hinges, also fastening and fixing and similar work confirming to Fe 290 Gde-E-165 complete all as specified and directed.

M&L for 32 mm thick flush shutter,solid core construction with block board core and plywood face panels,commercial type on both sides complete all as specified and directed.

S&F 35 mm thick factory made 2nd class hard wood glazed and skeleton shutters, open repeated and prepared to receive glass, gauze etc (with sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR part-I section 8,clause 8.24(a) and for door and fixed with chowkats,chemically pressure treated complete all as specified and directed.

M&L for factory made single extruded WPC (wood polymer composite)solid door/windows/ceosetory windows and other frames/chowkhat of size 45x70 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade),calcium carbonate and natural fibre (wood powder/rice husk/wheat husk) and non tocxic additives(maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum,screw withdrawal strength of 2200 N(face) & 1100 N (edge),mim compressive strength of 58 N/mm2,modulus of elasticity 900n/mm2 and resistance to spread of flame of class A category with property of being termite/boer proof,water/moisture proof and fire retardent and fixed in position with MS hold fast/lugs/ss dash fastener of required dia and length complete as per direction of engineer in charge.(MS hold fast/lugs or SS dash fastener shall be included complete all as specified and directed.

M&L for factory made single extruded WPC (wood polymer composite)solid door/windows/ceosetory windows and other frames/chowkhat of size 65x100 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade),calcium carbonate and natural fibre (wood powder/rice husk/wheat husk) and non tocxic additives(maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum,screw withdrawal strength of 2200 N(face) & 1100 N (edge),mim compressive strength of 58 N/mm2,modulus of elasticity 900n/mm2 and resistance to spread of flame of class A category with property of being termite/boer proof,water/moisture proof and fire retardent and fixed in position with MS hold fast/lugs/ss dash fastener of required dia and length complete as per direction of engineer in charge.(MS hold fast/lugs or SS dash fastener shall be included complete all as specified and directed.

S&F factory made single extruded WPC (wood polymer composite)solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (suspension grade),calcium carbonate and natural fibre (wood powder/rice husk/wheat husk) and non tocxic additives(maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 650 kg/cum,screw withdrawal strength of 1800 N(face) & 900 N (edge),mim compressive strength of 50 N/mm2,modulus of elasticity 850n/mm2 and resistance to spread of flame of class A category with property of being termite/boer proof,water/moisture proof and fire retardent .WPC to be laminated with PVC foil of min 14 microns thick of approved design pasted with hot melted adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size necessary full body threadeded star headed counter sunk SS screws,all asper directio of engineer in charge complete all as specified and directed.

S&F Providing and fixing factory made upvc white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor including cost of 5.5 mm thick glass and staineless steel wiremess includes all other connected accessories complete all as specified and directed..

S&F in repairs 4.8mm thick sheet glass ordinary quality in square n.exc 0.5 Sqm in each pane new door / window shutter complete all as specified and directed.

S&F factory made solid PVC door frame of size 50 mm x 95 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube with palin colour PVC sheet reinforced with MS tube complete all as specified and directed.

S&F factory Made Solid PVC Moulded Door Shutters (both side) 28 to 30 mm thick with partical board core (stile:), with 2,4 or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front Face & 2 mm dark colour both side PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed.

S&F 100 mm long mild steel butt hinges, cold rolled, medium weight complete all as specified and directed.

S&F 100 mm long stainless steel butt hinges with steel pin complete all as specified and directed.

S&F for 200mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and directed.

S&F 150mm long anodised aluminium handles, fabricated type complete all as specified and directed.

S&F 300mm long, aluminium alloy, anodised aldrop door bolt including fixing clips of sheet, cast or exturded section and fixing bolts and 16mm dia bolt of sliding bolts of extruded sections complete all as specified and directed.

S&F 150mm long aluminium alloy floor door stopper ,fabricated type complete all as specified and directed.

S&F in repair aluminium door strip with brush fixed as in door bottom fixed with nails or screw complete all as specified.

Dismentling timber framed filled rails, post, rafters purlins, etc under 40 sqm in section complete all as specified and directed.

S&F including fabrication of framed work such as in grills, grating ,hold fast of door and window chowkat etc., with ends of bars shouldered and or riveted or forget into spikes, frames guard bars, barred iron doors, and similar work conforming toFe 290 Gde-E-165 complete all as specified and directed

Hacking out old broken glasses of any thickness size & quality from wooden or steel window glazed with putty or fixed with beads including punching or drilling out old glazing pins/clips etc complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality in square n.exc 0.5 Sqm in each pane new door / window shutter complete all as specified and directed.

S&F 3mm thick figured glass pin head type in square n.exc 0.5 Sqm in each pane new ventilator / window shutter complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed.

S&F 30mm width of flaps continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed.

S&F 100 mm hasp & staple safety type of aluminium anodised including bolt to hinges plate and fixed with screws complete all as specified and directed.

M&L preparation of newly steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer with paint sprayers, complete all as specified and directed.

M&L preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer with paint sprayers complete all as specified and directed.

Dismantling of boarding,any description and any size and any position if fixed with screws complete all as specified and directed.

S&F for 18 mm thick 100% Solid PVC Laminated Board of required size comprising of virgin PVC resin of K Valve 57-60 (Suspension Grade),Calcium Carbonate and natural fibers ( Wood powders/rice husk/Wheat husk) and non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with having minimum density not less than 650 kg/cbm having good screw holding capacity (Screw Withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compressive of 50 N/mm2, Modulus of elasticity 850 N/mm2 and resistance of spread of flame of Class A category with property of being Termite/Borer Free, Water/Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter complete all as per specified and directed. Note : Material test certificate and authentication should be provided by the manufacturing company.

S&F of Stainless steel auto closing hinges openable at 0 degree for kitchen cabinet shutters complete all as per specified and directed. Make:- Hettich, Cat part No.9281432 or equivalent Cat Part of make as approved by GE.

S&F of stainless steel handles 138 mm size for kitchen cabinet shutters complete all as per specified and directed. Make:- Hettich, Cat part No.9113468 or equivalent Cat Part of make as approved by GE.

M&L for 60 mm thick M-35 grade factory made rubber moulded vibratory compacted cement concrete interlocking paver block in approved design and colour confirming to IS 15658-2006 with grey cement and pigment as approved and laid over and including 25 mm thick sand cushion and joints filling with sand complete all as specified and directed.

S&F in repair solid PVC wall Lining consisting of 5 mm thick single side prelam PVC sheet includsive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.

M&L for wall cladding tiles sizes 300 mm x 600 mm x 7-8 mm thick designer type coloured for wall etc set & jointed in cement and pointed in coloured cement to match the shade of tile laid over & including 15 mm thick rendering in CM(1:4) on brick work or concrete surface on wall and finished the even and fair to receive tiles complete all as specified and directed.

S&F in repair aluminium composite panel sheet 3 mm thick PVCF of brand name GURIND/ALSTRONG fixed with necessary aluminium tube with required silicon & screw as in ceilling/columns and in vertical surface complete all as specified and directed.

S&F in repair Stainless steel letters 450 mm height and 32 mm depth made of 1 mm thick stainless sheet with seemless welding rubbed polished and edges made smooth with necessary fixing devices complete all as specified and directed

S&F 12 mm thick tuffened glass door with suitable locking arrangement with lock (Godrej/link) 6 lever and self closing devices with rebates including jointing cleats of suitable section for fixing builders hard ware fittings door spring (Make Sandhoo/Samrat) with two Nos decorative type aluminium handle of 200 mm dia , complete all as specified and directed.

Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings including ridges complete all as specified and directed.

S&F 0.50 thick (including coated thickness) pre-colour, pre-profiled corrugated (Galvalume/Zinkalume) sheets of required colour and design having tensile strength of 550 Mpa as in roof, wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer/profile maker instruction complete all as specified and directed.

S&F 0.50 thick (including coated thickness) pre-colour, plain type sheet (Galvalume/Zinkalume) any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall,used as in ridge fixed with self tapping screws all as per manufacturer/profile maker instruction complete all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets,any thickness, including cover fillet complete all as specified and directed.

S&F of anodised aluminium snap grid frame of grid size (600 x 600)mm work for false ceiling complete all as specified and directed.

S&F of Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

S&F in repair 4 mm thick non asbestos fiber cement building board of 600mmx600 mm in size (HPSC E-classic) decorative finish fixed to aluminum /CGI frame work with hold down clips in false ceiling complete all as specified and as directed.

S&F of Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

M&L for preparation of old decorated surface of walls and applying one coat of white wash on wall complete all specified.

M&L for preparation of old decorated surface of ceiling and applying one coat of white wash on ceiling complete all specified and as directed.

M&L for preparing old decorated surfaces of wall scrapping machine tools /electric hand grinder with wire brushand applying one coat of oil bound distemper white or tintedwith paint sprayers with 1mm thick one or two coat of wall care putty complete all as specified and directed.

M&L preparation of old decorated surface of wall scrapping machine tools /electric hand grinder with wire brush and applying one coat of cement base paint complete all as specified and directed.

M&L for preparation of old painted surface of wooden work and applying one coat of synthetic enamel paint on surfaces of any description exc 10 cm width or girth with paint sprayers complete all as specified and directed.

M&L for preparation of old painted surface of steel surfaces (previously decorated) painting with one coat of synthetic enamel paint on old steel surfaces for grills, guard bars ,shutters etc complete all as specified and directed.

M/S Garg Sons (BID ID -3438436)

Channa Brothers and Co. (BID ID -3432616)