Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.7 LAccepted-AOC | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹24.6 L+₹5.9 L (31.4%)Rejected-Finance | L2 | Rejected-Finance Not being lowest |
Tender Value
₹18.3 L
EMD Value
₹36,600
Closing Date
16 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER
GARRISON ENGINEER (AF) AIR FORCE STATION TAMBARAM, CHENNAI - 600 046
PROVISION OF SENTRY POST , GUARD REST ROOM AT NP AREA AND FOUR TOILETS AT MAIN CAMP AF STATION TAMBARAM
2023_MES_618725_1
GE(AF)/TBM/8652/E8
Open Tender
Civil Works
Item Rate
120 days
Airforce Station Tambaram
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE AF TAMBARAM
₹36,600
Yes
20 Oct 2023
14 Sept 2023
18 Oct 2023
14 Sept 2023
16 Oct 2023
29 Sept 2023
15 Sept 2023 - 21 Sept 2023
Amount
Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in hard/dense soil all as specified and directed.
Excavation in trenches not exceeding 1.50m deep wide and n.exc 1.50m depth for foundation etc or for shafts wells, cesspits, manholes, pier holes, etc. not exceeding 10sqm on plan and not exceeding 1.50m depth and getting out in hard/dense soil all as specified and directed.
M & L PCC type D-2 1:4:8 using 40mm graded stone aggregate as in foundations, filling and mass concrete all as specified and directed.
Use and Waste formwork to side of concrete foundations, footings, bases of columns, raft and raft beams side and soffit(if any) of foundations and plinth beams and similar work vertical or to batter and rough finished surfaces of concrete complete all as specified and directed.
Use and Waste formwork to soffits of suspended slabs such as roof slabs, floorslabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces of concrete complete all as specified and directed.
M & L for Mild steel TMT bars 10mm dia and above cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
All as per item No. 6 above but 6mm dia and over upto and including 10mm dia in stirrups, spacers and binders
M & L for RCC M-30 grad Design Mix as in foundation, including raft, footings, foundation beams, plinth beams, bases for columns etc basement slabs and mass concrete complete all as specified and directed.
M & L for RCC M-30 grad Design Mix as in Slabs supported on walls beams and columns in floor, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified and directed.
M&L RCC M-30 grade Concrete print walls including coloumns and beams of cast-in-situ with 3D Printing technology without hampering the printing speed including the printing charge etc complete all as specified and directed.
Sl.item No. 10 Contd/… (a) The building should be RCC M-30 framed structure with 3D printing wall panels should have the thickness in the range of 200 mm and internal walls 100 MM thick. (b) The Proprietary 3D Printable concrete mix that is used in fabricating wall panels should have a minimum 28 days compressive strength around 30 Mpa. (c) Each layer in the wall panel should have a layer height of 40-50 mm and layer width of 50-70 mm. (d) Each wall module should be hollow with some infill patterns to reduce the weight, enable better thermal insulation and better acoustic properties. (e) Overall project should have a 3D printed finish of 40% to showcase the rustic finish of the technology. (f) 3D Concrete walls should be reinforcement with Fe 500 TMT Steel reinforcement bars duly spaced at 30 mm nominal cover in semi automated method of 3D Printing without hampering the printing speed. (g) Steel wire mesh reinforcements of minimum 2 mm thickness shall be places in horizontal manner to increase the tensile and flexural capacity.
M & L rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specied and directed
M&L Water proofing treatment shall be done over the roof with slope 1:40 by using 3mm thick APP based polymeric membrane as per manufactures instruction over 20mm thick plastering with CM 1:3 finished even and smooth without using extra cement including 3% water proofing compound by weight of cement over 50mm thick average PCC padding with 1:2:4 type B0 using 12.50mm graded stone aggregate complete all as specified and directed.
M & L for applying two or more coats of premium acrylic emulsion paint having VOC less than 50gm/litre and UV resitance as per IS 15489:2004, Alkali & fungal reistance dirt resitance paint of required shade with silicon additives @1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90 litre/10sqm over new surfaces including applying plaster of paris putty of 1mm thickness over on wall & ceiling surfaces complete all as specified and directed.
Supply and fixing factory made uPVC white colour Two track two panels sliding glazed window upto 1.50m height made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted without any extra cost.
Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted without any extra cost.
S & F Sheet glass, 4mm thick ordinary quality and glazing with beads fixed with metal pins or brass screws etc not exceeing 0.5 sq m in each pane all as specified and directed.
S & F Figured glass, pin head type 4mm thick and glazing with beads fixed with metal pin or brass screws etc not exceeding 0.5 sq. m in each pane all as specified and directed.
Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete all as specified and directed.
S & F 40mm thick flush shutters solid core construction with block board core and plywood face panels and both faces are covered with decorative face veneer with lipping/frame to match all as specified and directed.
S & F 2nd class hardwood Plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints and fixed all as specified and directed.
S & F Mild steel hold fasts, Bands, straps, supports heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; and similar small articles conforming to Fe-290 Gde-E-165 all as specified and directed.
S & F factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of M.S tubesfor top & bottom rails M.S frame shal;l be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppluing & fixing in the frame at site as per specification & drawing
S & F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube suppling & fixing in opening as per specification & drawing
S & F butt hinges medium weight cold rolled mild steel and fixed of size 100mm
S & F Aluminium anodised barrel tower bolts of extruded section and fixed of size 125mm
S & F Aluminium anodised barrel tower bolts of extruded section and fixed of size 150mm
S & F 100mm aluminium anodised alloy handles fabricated type
S & F 125mm aluminium anodised alloy handles fabricated type
S & F floor door stopper 140mm overall length aluminium alloy body and anodised with hard drawn steel spring fixed all as specified and directed.
M & L for preparation of new wooden surfaces applying two coat of syntheticenamel paint over a coat of pink primer on wooden surfaces of any description over 10cm width or girth all as specified and directed.
M & L for moorum/red bajri filling in floors or pavings laid in layers not exceeding 15cm thick spread levelled and rammed including watering
M & L for hard core of broken stone boulders gauge n.exc 63mm deposited spread and levelled in layers not exceeding 15cm thick watered and rammed to a true surface all as specified and directed.
M & L for 100mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in flooring all as specified and directed.
M & L for Non-Skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but n.exc 0.18 sqm, in floors etc set and jointerd in neat cement and slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick for laying floor tiles in CM 1:6 all as specified and directed.
All as per item No. 35 above but in vertical surfaces such as in skirtings etc with backing coat of CM 1:3, 10mm thick all as specified and directed.
M & L for Glazed ceramic coloured tiles in vertical surface 350 x 250x 7mm/450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over CM 1:4, 10mm thick backing coat all as specified and directed.
M & L for 75mm thick PCC type B-1, 1:2:4 using 20mm graded stone aggregate as in plinth protection and finished the surface even and smooth without using extra cement all as specified and directed.
S&F 1000 ltrs capacity three layered Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.
S&F 20mm bore dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed all as specified and directed.
S & F 25mm outer dia of bore CPVC pipe SDR 11 & Plain CPVC SDR 11 fititngs ixed complete to walls and ceilings or laid in floors & trnches etc complete all as specified and directed.
S & F 20mm bore outer dia of CPVC pipe SDR 11 & Plain CPVC SDR 11 fititngs ixed complete to walls and ceilings or laid in floors & trnches etc complete all as specified and directed.
S & F CPVC 25mm outer dia male brass threaded adaptor all as specified and directed.
S & F 20mm bore dia gun metal gate valve with iron wheel head screwed both ends for iron pipes and fixed as directed.
S & F 15mm dia bore Bip tap cast copper alloy with crutch or butterfly handle fancy type chromium plated screwed down for iron pipe or brass ferrule all as specified and directed.
S & F 15mm bore dia pillar taps fancy type cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and flyn uts screwed for iron pipe all as specified and directed.
S & F 15mm bore dia angular Stop cock fancy type chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specified and directed.
S & F 15mm bore dia concealed stop cock fancy type chromium plated with long shank and cup complete all as specified and directed.
S & F 15mm bore 125mm size Brass Chromium plated shower roses with or without swivel joints, including fixed to steel pipe or union all as specified and directed.
S & F Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 Mtr long flexible tube and ABS wall hook including making connections and fixed in positions complete all as specified and directed.
S & F PTMT grating doom 125mm dia with waste hole provision
S & F PTMT grating doom 100mm dia
S & F PVC Connection pipe of 15mm size with PTMT nuts of length 450mm all as specified and directed.
S & F 75mm bore PVC (SWR) pipes single socketed in any length with joints laid in trenched or in floors all as specified and directed.
S & F 110mm bore PVC (SWR) pipes single socketed in any length with joints laid in trenched or in floors all as specified and directed.
S & F PVC (SWR) bends any radius 75mm bore
S & F PVC (SWR) bends any radius 110mm bore
S & F PVC (SWR) junction single T equal or un equal of 75mm bore
S & F wash basins vitreous china (flat back or angle back type) any size including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe all as specified and directed.
S & F vitreous china wash down water closet with seat cover (pedestal pattern) white (excluding fixing bolts and flushing cistern) all as specified and directed.
S & F PVC syphonic action type flushing cistern low level white with inlet ball valve float and handle including brackets 10 litres capacity including flush pipes to pedestal pan including all joints etc complete all as specified and directed.
Removing the excavated soil not exceeding 50m and deposting where directed at a level not exceeding 1.5m above the starting point all as specified and directed.
Returning, filling in, including levelling watering and well ramming in layers not exceeding 25cm all as specified and directed.
S & F 500 ltrs capacity three layered Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed
S & F for RCC Bio septic tank for 05 users including excavation, removing soil etc complete job all as directed
Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade, PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with mild steel/pressed steel sunken boxes with earth dolly duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets etc, including PVC insulated multi-stranded copper conductor 1.5 Sq mm nominal cross sectional area single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following:- (a) One light Point Controlled by one oneway switch
(b) One ceiling/ exhaust fan Point Controlled by one oneway switch
( c) One socket point on independent board
(d) One 5Amps socket point on same board with other switches
S&F Switch modular single pole 6 Amps
S&F Ceiling fan 1200mm sweep high speed with fan regulator all as specified and directed.
S&F Exhaust fan 300mm sweep PVC body with louvers all as specified and directed.
S&F Ceiling rose surface PVC insulated three plates "JUMBO' type 240 volts
Supply and fixing in replacement of Wall mounted light fitting LED batten, extruded aluminium heat sink provided for effcient heat dissipation & integrated electronic driver with 20 W LED 6500K (4 ft) lamp including disconecting, removing, and connecting into electric circuit and testing all as per Havells Cat part No. LUMILINEBS20WLED865SPCWH or Equivalent make from list of Makes.
Supply and fixing MCB Single pole 6-32 amps, 'C' Curve, 10 KA , SP 240V
Supply and fixing MCB SPN 40 Amps, 'C' Curve, 10 KA
Supply & fixing of Sheet metal enclosure with distribution board Double Door 415 volts TPN 4 way with suitable Bus bar and provision for MCBs/ isolators fixed on wall and connecting with all connections all as directed
Material and labour for earthing complete with GI plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of plate not less than 1.5m below ground level connected to earth wire 4.0 mm GI strip means of bolts, nuts, washers of galvanized all as shown in electrical plate No.3 of SSR Part-I SSR Part-I including necessary excavation and earth work. PCC 1:3:6 type C1 chamber, RCC cover in 50mm thick 1:2:4 type B1 with 8mm CTD 140mm centre to centre with suitable handle, watering pipe 20mm dia light grade pipe with funnel, charcoal salt connected to earthing test point all as specified including testing and commissioning on completion.
JVM Construction
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .