Construction of Primary Hea...

Providing laying ,testingandcommissioningof(C) class heavy duty MS pipe conforming to SI SI 1239 /3589 i/c fitie ke el gra ren chains ting excaration s antidios o treat ne wit oc lar asphat atpe as per IS 10221 refilling the trench etc o.f following sizes complete as required.NS

SITCOfINTERNALOREXTERNALweatherproof 7 standard fire hose cabinet (750 m x600 m x 250 m deep) for yard hydrants made of 16 SWG powder coated M.S. sheet having single or double opening glazed (4.0 mm thick glass) shutter including necessary locking arrangement by allan key, stove enamelled Fire red finish with Fire Hose` marked on front, suitable for housing 2 nos. Hose pipe, 1 No. branch pipe andnozzle spanner. (For external hydrant system) (N.S)

Providing, fixing, testing and commissioning of 100 mm dia Burden type, Stainless Steel dial type pressure gauge (in Pump Room) including brass isolation valve and pipe having caliberation of 0- 15 Kg/cm?.

SITC OF DOL type fire pump panel suitable for 450 Ipm fire pump 415 V plus /-6 volts,panel shall be free standing floor mounting sheet metal enclosed dust and verming proof. Panel shall be provided with heat shrinkable sleeves and shall be colour coded. The panel shall be suitable for cable entry from top or bottem. The minimum fault rupturing for all incoming and outgoing switch/ breakers shall be 35 KA. The panel shall be fabricated.Auto mannual Starters with change over system.

Fabrication, supply, insallation testing and commissioning of electrical control panel of cubical construction , floor mounted type, fabricated out of 2mm thick Crca sheet, compartmentalised with hinged lockable door ,dust and vermin proof ,powder coated of approved shade after 7 tanktreatment process, cable alley ,interconnection with suitable size copper conducor cable / solid copper strip, having switchgears and accessories, numbering etc completein all respect ,suitable for main fire pump pressurisation pump and diesel pump set complete as per CPWD specification with following m coming and outgoing, suitable for opreraton on 415v, 3 phase, 50 Hz Ac Supply with enclosure protection class IP 42 as required.As per DSR 18.5.3

Providing laying , testing and commissioning of ( C) class heavy duty MS pipe conforming to IS 3589/ IS 1239 including Welding ,fittings like elbows ,tees flanges,tapers ,nuts bolt ,gaskets etc. And fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complite as required. DSR 2022 code no . 18.7.3

Providing laying , testing and commissioning of ( C) class heavy duty MS pipe conforming to IS 3589/ IS 1239 including Welding ,fittings like elbows ,tees flanges,tapers ,nuts bolt ,gaskets etc. And fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complite as required. DSR 2022 code no . 18.7.2

Providing laying , testing and commissioning of ( C) class heavy duty MS pipe conforming to IS 3589/ IS 1239 including Welding ,fittings like elbows ,tees flanges,tapers ,nuts bolt ,gaskets etc. And fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complite as required. DSR 2022 code no . 18.7.1

Supplying and fixing 63 mm dia Stainless Steel (grade 304 short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to ilS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required • (DSR code No. 18.18.2)

Supplying and fixing firs-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complite with the follwing as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type-2 as per IS 12585. 20 mm normal internal dia gun metal globe and nozzle. Drum and brackets for fixing the equipmets on wall.connections from riser with 25 mm dia stop gunmetal valve and MSpipe and socket (DSR Code No.18.17.1)

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and femaile coupling duly bond with GI WIRE, RIVETS ETC. CONFORMING TO IS 636 (Type -A) as required. (DSR code No. 18.16.2)

Supplying and fixing single headed internal and external yard hydrent valve with instantaneous Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 ( TYPE -A) with blank stainless steel cap and chain as required) (DSR code No.18. 9.2)

Supply installation ,testing commissioning sprinkler flexible pipe 1500 mm (UL listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (BURST ) with branch line (inlet ) 25 mm NPT male thread to sprinkler head (outlet ) 15 mm NPTfemale thread with reducer ,nipple ,2 side brackets , center bracket, stockbar of following sizes complite as required. (DSR code No. 18. 25.4)

Providing ,fixing, testing and commissioning of 15 mm dia quartzoid bulb type brass sprinklers of rating 68 degree centigrade with required accessories Pendent type (DSR 18.21.1)

Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following , complete in all respects, as required: (Terrace Pump) (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body and bronze impeller with stainless steel shsft mechanical confirming to IS: 1520 (b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volt ,3 phase ,50 Hz, ÁC supply with IPS5 class of protection for enclosure horizontal foot mounted type with class - `F`insulation conforming to IS- 325 (c) M.S fabricated common base plate ,coupling ,coupling guard foundation bolt etc as required (d) Suitable cement concrete foundation duly plastered and with anti vibration pads 450 LPM at 35 m head (DSR- 18.4.2)

Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable automatic operation and consisting of following complete in all respects, as required: (Jockey Pump) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft mechanical seal conforming to IS: 1520 . Suitable HP squirell cage induction motor tefc type suitable for operation on 415 volt, 3 phase 50 HZ AC supply with IP 55 class of protection for enclosure, horzontal foot mounted type with class- ` F `insulation, conforming to IS: 325 M.S fabricated common base plate , coupling coupling guard, foundation bolt etc as required. M.S fabricated bolt etc as required. Suitable cement concrete foundation duly plastered and with anti vibration pad 180 LPM suitable for 56 Mtr 23 (DSR - 18.3.3 )

Supplying, installation, testing and commissioning of electric driven Main Fire Pump suitable for automatic respects operation and consisting of following, complete in all as required (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520 (b) suitable HP squirrel cage induction motor ,TEFC , synchronous speed 1500 RPM, suitable for operation on 415 volt, 3 phase 50 Hz,ac supply with IP 55 protection for enclosure, horizontal foot mounted type with class ` SYSTEM F` insulations, conforming IS -325 FOR HYDRENT • (DSR - 18.1.9) 1620 LPM suitable for 56 Mtr Head. ( DSR-18.1,9 )

Supplying, installation, testing and commissioning of diesel engine driven fire pump suitable forl automatic main operation and consisting of following complite in all respect, as required (Diesel Driven Pump ) horizontal type, multistage, centrifugal pump of cast of iron body and brinze impeller with stainless steel shaft, mechanical seal conforming to IS 1520 OF Suitable HP 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with autostarting mechanism, 12 /24 volt electric starting equipment, disel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick almunium sheet cladding, residebtial silencer, instruments and protection as per standard specification ,stop solenoid for auto stop in the ecent of fault with audio indications, painted with post office red colour etc .as required. M.S fabricated ,common base plate coupling ,coupling guard, foundation bolt etc. as required. 1620 LPM 56 MTR HEAD ( DSR-18.2.9 )

Providing, installation , testing and commissioning of non-return valve of following sizes confirming to IS 5312 complete with rubber gasket. GI bolt ,nuts, washers etc as required 80 mm dia ((DSR code NO. 18.14.4)

Providing, installation , testing and commissioning of non-return valve of following sizes confirming to IS 5312 complete with rubber gasket. GI bolt ,nuts, washers etc as required 100 mm dia ((DSR code NO. 18.14.5)

Supplying fixing › testing and commissioning of butterfly vave of PN 1.6 rating with bronze /gunmetal seat duly ISI markedcomplete with nuts, bolt, washers gaskets conforming to IS 13095 OF FLOWING SIZES AS REQUIRED 100 mm dia. (DSR code NO. 18.11.5)

Supplying fixing › testing and commissioning of butterfly vave of PN 1.6 rating with bronze /gunmetal seat duly ISI markedcomplete with nuts, bolt, washers gaskets conforming to IS 13095 OF FLOWING SIZES AS REQUIRED 150 mm dia. (DSR code NO. 18.11.6)

NS Item -providing and fixing of pressure switch in M.S pipe line including connection (DSR code No. 18.22)

Supplying and fixing orifice plate made out of 6mm thick stainless steel ( Grade 304 ) with orrice of required size to be fitted between flange and landing valve of external and internal hydrent to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. (DSR code No. 18.13) NS

Supplying and fixing air vessel made of 250 mm dia ,8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required (DR code No.18. 20)

Providing, installation, testing and commissioning of stainless steel Y- strainer fabricated out of 1.6 mm thick stainless steel, grade 304, sheet with 3 mm dia hole with stainless steel flange. 100 mm dia. (DSR code No. 18.15.2) NS

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet| couplings complete with cap and chain as reqd, for suitable dia MS pipe connection conforming to IS 904 AS REQUIRED .2 WAY -100 mm dia MS pipe (DSR code No. 18.19.1). NS

SITC of 9 Itr capacity Fire Bucket made in 16 guage MS filled by 9 kg sand with MS angle stand arrangement of hanging 6 buckets with shed having • (NS)

SITC of Clean Agent type ISI mark IS code 15683 2006 Fire Extinguisher capacity: 2 kg location - o.t room ,nursing station ,lab machinry room pantry kitchen (NS)

SITC of ISI marked IS: 15683) portable ABC multipurpose filled by 90% (MAP) mono amonioum phosphate powder nitrogen pressurised type fire extinguisher, Capacity 6 kg with 90% map complete in all resp. (N.S )

SUPPLY AND INSTALLATION of ISI marked (ISI MARK 15683) portable Co2 fire extinguisher of capacity 4.5 kg flat base including valve, dischargeone metar long hose of meter complete in all respect with explosive certificate .(NS)

-Providing laying , testing and commissioning of ( C) class heavy duty MS pipe conforming to IS 3589/ IS 1239 including Welding ,fittings like elbows ,tees flanges,tapers ,nuts bolt ,gaskets etc. And fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complite as required. DSR 2022 code no . 18.7.7

AUTO GLOW EXIT SIGNS AND INDICATION SIGNS SIZE 12 `x 6`, Indication every exit point,fire point,fire extinguisher. (N.S )

N.S ITEM: SupplyandInstallation Of 4Zone Fire alarm panel compiles to BIS 2189 And tested by ERTL(N)andSYSTEM SENSOR 2*16 CHARACTER backlit lcd display(4820character ,optional ,64/28/256 events logging facility with real time clockand keypad

Supplyand Installaation of fier Alarm sounder

Supply and Installation of manual call point :Available for flush or Surface mounting.: Front Protection glass cover:Unbekable glass abs plastic body

Supplyand Installation of smoke detector conventional type

Fabricaation ,supply installation testing and commissioning of electrical control anel of electrical control panel of cubical construction, floor mounted type- for overhad pump.(ISI)

Supply of 90 watt LED street light fitting potted driver and aluminium dia cast body (Philips/ Bajaj/ Crompton/ Wipro/ Havells/ Halonix/ Surya) make including making necessary connetions.

Supply of 20 Watt LED Tube light fitting (Phillips/Bajaj/Crompton/Wipro/Havells/Halonix/Surya) make including all petty material required to complete the job in all respect

Supply of 36 Watt LED Surface Panel light fitting 600mmx600mm(Phillips/Bajaj/Crompton/Wipro/ Halonix/Surya) make including making necessary connections.

Supply of 36 Watt LED Recess Panel light fitting 600mmx600mm(Phillips/Bajaj/Crompton/Wipro/ Halonix/Surya) make including making necessary connections.

S/E of copper pipe for split A.C. including making necessery connections and all patty material required to complete the job in all respect.

S/E of PVC drain pipe for split A.C. including making necessery connections and all patty material required to complete the job in all respect

Percentage BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Civil Work

HSR Items

Please Enable Macros to View BoQ information