Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.9 LAccepted-AOC 28 H TOLLYGUNGE CIRCULAR ROAD KOLKATA 700053 | KOLKATA | KOLKATA | WEST BENGAL | 700053 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹36.7 L+₹3.8 L (11.5%)Rejected-Finance 47A C3 OLD DAMU NAGAR PULIAKULAM COIMBATORE 641 045 | COIMBATORE | COIMBATORE | TAMIL NADU | 641045 | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹36.8 L+₹3.8 L (11.5%)Rejected-Finance | L3 | Rejected-Finance Not being lowest | |
| 4 | L4₹36.9 L+₹3.9 L (11.8%)Rejected-Finance 27 WESTERN STREET ROOM NO 307 KOLKATA 700012 WEST BENGAL | KOLKATA | KOLKATA | WEST BENGAL | 700012 | L4 | Rejected-Finance Not being lowest | |
| 5 | L5₹37.7 L+₹4.8 L (14.4%)Rejected-Finance 34 C R AVENUE JABAKUSUM HOUSE 3RD FLOOR ROOM NO 312 KOLKATA 700 012 | KOLKATA | WEST BENGAL | 700012 | L5 | Rejected-Finance Not being lowest |
Tender Value
₹32 L
EMD Value
₹64,000
Closing Date
22 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER
GE I R and D Chandipur Post Chandipur PIN 756025
REPAIR REPLACEMENT OF LT CABLES PANELS FEEDER PILLARS AND ALLIED WORKS AT PXE CHANDIPUR
2022_MES_555260_1
8780/CDP
Open Tender
Civil Works
Item Rate
180 days
chandipur
As per tender documents
8 documents required · 8 mandatory
₹500
GE I R AND D Chandipur
₹64,000
Yes
23 Jan 2023
30 Sept 2022
24 Oct 2022
30 Sept 2022
22 Oct 2022
14 Oct 2022
Amount
NOTE (Applicable for all items) :- The bidders/contractors are advised to read tender document & all corrigendum / amendments and General conditions of contracts before entrying/quoting the rates.
Material, Fabrication and Labour for Cross Arms, bracing,V Arms, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat and two under coat of synthetic enamel paint and incl removing rusted cross arm and clamps complete all as specified.
Dismantling of LT over head lines ACSR conductor & Restringing to the required tension incl. Replacement worn out ACSR conductor, binding wires, Cross arms, Insulators, Clamps, nuts, bolts and washer etc, Note: ACSR Conductor, cross arms, insulators, clamps, nuts, bolts and washers to be meaasured and paid in respective items.
Supply and Stringing ACSR (Aluminium Conductor Steel Rein - forced) Conductor and incl removing old ACSR conductor complete all as required and directed.
Supply & Fixing, in replacement, pin insulator for LT ACSR conductor
M&L Earthing with galvanized steel earth plate electrode of size 60cm x 60cm x 6 mm thick,buried directly in ground(earth pit not less than 2.25 meters deep below ground Level) with top edge of the plate not less than 1.5 meters below normal ground level connected to galvanised iron strip size 25 mm x 4mm as earth lead by means of bolts, nuts, check nuts and washers etc, GI earth lead strip duly protected by 40 mm dia GI pipe (light grade) and 20 MM GI pipe (medium grade) for watering and connected to control switch as directed including necessary earth work in soft/loose soil and disposal of soil to a distance not exceeding 50 Mtrs, PCC (1:3: 6) type C1 as in concrete pit,50mm thick precast RCC (1:1.5:3) type A1 as in cover slab duly reinforced with 8 mm dia TMT bar @ 100 mm c/c both way and two nos lifting handle made cut of 10 mm dia TMT bar and set in cement mortar (1:4), testing etc complete and as specified in electrical plate No 3 of SSR part-I including taking down old earthing plate & strip complete all as spd and directed.
Trimming /cutting of tree branches /bushes obstructing the Street Light Poles/HT/LT lines making clear distance of 2.0 meter from the outer conductors of OH Lines/ poles all around including removing of branches/bushes of trees from site all as directed.
Supply & fixing in repair Garden Bollard blink made up of extruded aluminum with PC diffuser light fitting with robust design , IP 65, Polycarbonate cover high power LED light of capacity 9 watt.including provn of necessary nuts,bolts and washers for installation on and with foundation and connection complete.(Make/ Model:- (Make/ Model:- Surya Glaze LED Bollard, Cat No . SLEBL9W GLZ600 or equivalent model of make as per Appendix 'A')
Taking down carefully undergound cables of any sizes for testing, meggering and keeping serviceable cable and cable protection old bricks in safe costody for re-use with making good distubed surfaces,trenches or walls, floors etc complete all as specified & directed .
Supply and laying cable XLPE insulated screened PVC bedded,galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 Sqmm 3.5 core all as specified and directed by Engr-in-charge..(Make Polycab/Finolex/Glostar)
All as per Sl Item No 9 above but for 70 sqmm 3.5 core.
All as per Sl Item No 9 above but for 50 sqmm 3.5 core.
All as per Sl Item No 9 above but for 35 sqmm 3.5 core.
All as per Sl Item No 9 above but for 25 sqmm 3.5 core.
All as per Sl Item No 9 above but for 16 sqmm 4 core.
All as per Sl Item No 9 above but for 10 sqmm 4 core.
All as per Sl Item No 9 above but for 10 sqmm 2 core.
All as per Sl Item No 9 above but for 6 sqmm 2 core.
Relying old serviceable cable any size and type obtained from Ser No-1 above. Note :- Earth work to be measured and paid separately.
Excavation in trenches not exc 1.5m deep and n.exc 1.5m wide and getting out in soft/loose soil for laying of cable all as specified and directed.
M&L for local sand coushioning with dry and clean over and under the cable for protection of cable , 80 mm sand laid before laying the cable & 150 mm sand after laying the cable and filling the sand in cable duct inside the sub station building complete all as directed
Returning, filling in, including spreading, leveling watering and well ramming in layer not exceeding 25 Cm.
Removing of excavated material not exceeding 50 m and depositing where directed at level not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point.
M&L for laying of bricks locally available sub class 'B' bricks (old size) for cable protection cover laid flat and dry in trenches over the cable prependicular to the direction of cable all as directed.
Re-laying of old serviceable bricks retreived from Sl No.1 here-in before for cable protection cover laid flat and dry in trenches over the cable prependicular to the direction of cable all as directed.
Supply and laying of GI tubing light grade 40 mm with all fittings laid in trenches/road crossing/along the pole for protection of cable including taking out old GI tubing and making surface in condition all as specified and directed .(Make:- Jindal/Prakash/Tata)
Supply and laying of GI tubing light grade 50 mm with all fittings laid in trenches/road crossing/along the pole for protection of cable including taking out old GI tubing and making surface in good codition all as specified and directed .(Make:- Jindal/Prakash/Tata)
Supply & Fixing in repairs MCCB of 100 Amps,4 pole ,with Thermal -Magnetic Release , DU100H type with breaking capacity Icu at 415 volts AC,50Hz , 30 kA ,including connection and testing complete.
Supply and fixing MCCB 4 pole,415 V 160 amps,adjustable type with breaking capcity 36 KA including taking down old one.
Supply & Fixing in repairs MCCB,200 Amps, 415 volts, four pole 25 kA ,including connection and testing complete.
Supply & Fixing in repairs MCCB,250 Amps, 415 volts, four pole 25 kA including connection and testing complete.
Supply & Fixing in repairs MCCB,400 Amps, 415 volts, four pole 50 kA including connection and testing complete.
Material and labour for heat shrikable type LT Jointing kit for 1.1 KV XLPE cables of size 70-120 sqmm 3.5/4 core straight through joint complete including taking down old one. (Make Denson/ Multishrink/ 3M)
Material and labour for heat shrikable type LT Jointing kit for 1.1 KV XLPE cables of size 25-50 sqmm 3.5/4 core straight through joint complete including taking down old one. (Make Denson/ Multishrink/ 3M)
Material and labour for heat shrikable type LT Jointing kit for 1.1 KV XLPE cables of size 10-16 sqmm 4 core straight through joint complete including taking down old one. (Make Denson/ Multishrink/ 3M)
Supply & Fixing repairs cable junction box made of thermoplastic, halogen free, weather proof with metric Knock outs for cable entry including four/five pole terminals and cable entry glands for incomming, out going and connection cable with protection grade IP-66/67 of size 205x255x112 mm and suitable for LT under ground cable any size/capacity including bracing clamp,bolts,nuts & washers. (Make Hensel/ model No-KF2525B or equivalent model of make as per Appendix 'A')
Cutting chases,pinning in,making good of PCC hard standing to facing where required and pointing in cement mortar 1:3 , exc.10 cm. but not exc.20 cm girth to ends or edges of landing,steps,cills,sunshades,shelves,lintels,etc.and cutting chases for concealed water tubing or concealed conduit wiring,laying of cables and making good with old shape and size all as specified and directed.
Material and labour for cutting of the existing following type of road surface and making good the surface as per existing finishes complete all as specified and directed :-
PCC road / hard standing / floor, etc. exc. 45 cm. and not exc. 90 cm in depth and width 45 cm (min) for laying of pipe, tubing, etc. and making good and finished & matching the disturbed surfaces with existing surfaces complete all as specified and directed.
Cutting of exsiting Bituminous road exc. 45 cm. and not exc. 90 cm in depth and width 45 cm (min) for laying of pipe, tubing, etc. and making good and finished & matching the disturbed surfaces with existing surfaces complete all as specified and directed.
Dismantling and taking out old un-serviceable Non-integral light fittings from 13.5 mtr to 16 Mtr High mast tower with checking its connection and unserviceable parts ,such as Drivers,LED lamps ,LED Fittings etc and replace the same and refitting in its position including servicing the double drum winch and greasing the 5 mm dia steel wire rope, wheels,operating handles with all parts and equipments of existing High mast Tower ,fitting ,Allignment upto length, testing complete in all respect after the high mast tower mounted all as specified and directed
M&L for replacement of Steel wire rope of size 5 mm dia ( as per existing) with required nuts,bolts and hooks including taking down old U/S steel wire rope from different high mast towers.
Supply and fixing of twin dome aviation obstruction lights of type LTAL012 with two Nos 14 W LED lamps including taking down old one.
M&L for cleaning,scrubing and preparation of surfaces of PCC pole and carrying out following phase of work all as directed :- (a) weather coat paint on all the sides of PCC pole, area above the zebra painting all as specified & directed. (b) carrying out painting by synthetic enamel paint one coat over the concrete surface of pole using black and yellow paint all as directed area above the pole coping upto 1.5 mtr and numbering the pole all as specified. (c) Silver colour spray painting of mild steel bracket, clamps and nut, bolts all as specified and directed.
M&L for repair of damaged coping of PCC pole by plastering with cement mortar 1:5 and 2 coats of weather coat paint of PCC coping area all as specified and directed.
Repair and maintenance of broken door of LT outdoor feeder pillar box/ LT panel by welding or any other repair work as per site requirement repair/ maintenance of hinges, replacement of locking system and ensure open/close the door smoothly, repair/ maintenance of bus bar if any, replacement of MCBs & MCCBs where necessary , providing all necessary arrangement nut bolt thimbles, lugs ferrules, glands of suitable size with spray painting of whole/feeder pillar box/ LT panel with two coats of synthetic enamel paint, smoke grey colour (1st quality) over a coat of primer complete all as specified and directed( NOTE- The minor Spares like nuts, bolts,screws,washers,Insulation Tapes, Busbar Sleeves used in repair works are included in the scheduled item rates. The spare parts like MCBs,MCCBs etc. will be paid separately )
Supply & Fixing , in replacement, PVC copper cable single core of size 1.5sq mm two run for junction box to street light fitting connection. (two run of cable to be measured as one unit) .
Supply & Fixing, in replacement, PVC conduit pipe of size 20mm for protection of copper wire to be fixed on elect pole.
Supply & Fixing, in replacement, flexible hose pipe of size 20mm protection of copper wire.
M&L for cleaning of 2/4 pole structure/sub station /OHR/UG sumps/Pump house surrounding by surface dressing n.exe 15 cm in depth in soft/loose soil including removing shrubs, grass, miniplants and other unwanted materials and levelling and removing the excavated materials n.exe. 50 mtr complete all as specified and as directed.
Supply and fixing in repair of GI pipe Bracket of 40 mm dia light grade pipe bend to shape of approx length 1.5 Mtr including 2 no. MS Clamp of flat iron size 40x6 mm complete with nut, bolt, washers all as specified and directed. (Make of GI pipe- Jindal/Prakash/Tata)
Supply and erecting in replacement of Prestressed concrete pole, 9.0 metres long, 102mm x 172mm at topand 102mm x 279mm at bottom,class 10 including taking down old us pole complete all as specified and directed. Make : Calcutta poles/Nilachal or equivalent as approved.
M& L for cement concrete PCC(1:2:4) type B1 using 20mm graded aggregate as in pole coping complete all as specified
M& L for cement concrete PCC(1:3:6) type C2 using 40mm graded aggregate as in foundation of pole complete all as specified
M& L for cement concrete PCC(1:4:8) type D2 using 40mm graded aggregate as in mass filling of pole complete all as specified
M&L for pre-cast cement concrete block massonry with solid blocks in type-C1,1:3;6 with 20 mm graded aggregate exc.10 cm in width x 10 cm x 120 cm pillar type with engraved marking of 11KV. HT cables of 95 sqmm on both front sides of the top portion of the concrete pillarand painting with two coats of weather coat and grounded properly 1/3 portion minimum foot base portion of the pillar in every 50 mtrs of the cable length and each turning,loop and joints of cable all as specified and directed
KRISHNA ENTERPRISES
jlenterprise
ELECTRO COMMERCIAL CO
Tirupati Buildcon Pvt. Ltd.
J B NATH AND SON
BHARUKA ENTERPRISES
chauhan syndicate
Bidder Name
Tirupati Buildcon Pvt. Ltd.
BHARUKA ENTERPRISES
KRISHNA ENTERPRISES
J B NATH AND SON
chauhan syndicate
ELECTRO COMMERCIAL CO
CONSTRUCTION AND MAINTENANCE ENGINEERING CORPORATION
jlenterprise
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .