Providing and fixing of integrated Solar LED lights in D.C. Colony Una, Distt.Una (HP)

Supplying and fixing 30W ± 10% Watt all in one integrated Solar LED light with Monocrystalline Solar PV Module panel minimum 75 Wp CRI > 70 & PIR sensor for motion detection Including five years warranty as required with following specs. Panasonic/Wipro/Phillips/ Transrail/ LT/ HPL/ Havells/ Bajaj/ Osram to the best satisfiation of Engineer in Charge of following specifications:-

Solar LED street light specifications:

System Wattage (Input) 30W ±10%

Input Voltage 12.8 V

Effciency > 90%

LED make Bridelux/Maniux/OSRAM/ CREE/ Nichia/ Seoul/Phillips

CCT 5500K-6500K

Luminous Efficacy 120m/W or better

Total Lumens 3600 or better

LED Lifespan minimum 50000hrs

Charger Type MPPT (in built inside luminiare)

Operating Voltage 11 ± 3% to 14.4 V ± 3%

Open Circuit protection, Short Circuit protection and Reverse Polarity protection inbuilt Should be provided

Operating Temperatue 0 to 45 degree centigrade

Humidity Range 90% RH

IP protection IP- 65

IK for IP-Lens IK08

Material Aluminium Extrusion/ Die Cast

Battery Type LiFePo4

Battery Capacity (AH) 24-30Ah (Battery life cycle 2000 cycles minimum)

Warranty 5 years

Free maintenance services shall be provided by the supplier during the warranty period of five years. No payment will be made on this account as it is included in the cost of the main equipment. This maintenance service will include: a) Preventive and Routine Maintenance: It includes a minimum of two visits to individual sites, which shall be done at least once every year and shall include activities such as cleaning of modules, checking of connections of panels, PCB, DC battery connections and any other activity that may be required for the proper functioning of the system. A proper record on this account, duly countersigned by the beneficiary, will be maintained by the agency. Any spares and consumables required during the period of five years, including the replacement of any components that go bad, will be supplied free of cost by the supplier.

Supplying and erection of Galvanized Iron (G.I.) pole, 'B' quality of 6 mts. length , company fabricated with 3mm thick GI sheet and base plate of size 200mm x200mm x12mm G.I. sheet i/c 4 nos. foundation bolts of size 20mm dia of suitable length, RCC foundation of size 500x500x1500 mm as per standard drawing of manufacturer in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required and fixing up to a given depth below G/L., including GI bracket provided at top etc. complete in all respects as required:-Makes:- Bajaj/ Valmont/ Surya/ Utkarsh/ Ventura

Supply of Double Telescopic Aluminum Ladder.The ladder frame and steps should be made of 1.5mm thick aluminium alloy and the steps made of heavy duty non-slippery aluminum alloy.The top and bottom cap end are to be fitted with non slippery rubber stops .Steps must be strong enough to support at a time weight of 150kg with 1 year warranty as per IS4571/1977. The ladder should have maximum length of 21-22 feet after extension and close height 3.5 feet with Width atleast 1.57 feet, Steps from 1.5mm thick alluminium pipe fitted at maximum interval of 1.5 feet in section upto complete length. Make: Corvids/ Plantex/ Equal/ Aardwolf/ Bathla/ Euro/ Buketlist/

Please Enable Macros to View BoQ information