Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹24.9 LAccepted-AOC | 1 | Accepted-AOC M/s Punniyakotti Works Contractor has quoted Rs 24,90,960 and being L-1 bidder the committee recommended for awarding the contract. | |
| 2 | 2₹26.0 L+₹1.1 L (4.26%)Rejected-Finance | 2 | Rejected-Finance Bidder is L-2 |
| Sl No | Description | Qty | Unit | A.PUNNIYAKOTTI WORKS CONTRACTOR L1 | FRIENDS ENGINEERING L2 |
|---|---|---|---|---|---|
| 1.00 | Pre fabrication, Edge preparation ,Fit up , welding & erection of Structure,Platform,HVAC Ducting & supports as per Drawing & Dimensions as per Technical specifications | 8,000 | Kg | 55 ₹4,40,000 Lowest | 55 ₹4,40,000 Lowest |
| 2.00 | Providing and fixing anodized aluminium (Anodised transparent or dyed to required shade according to IS:1868 Minimum Anodic coating of grade AC 15) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z Sections and other sections of approved make confirming to IS:733 and IS:1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling , C.P brass / stainless screws all complete as per architectural drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required. (fittings, Glazing and taging shall be paid for separately)
NOTE : 1) The rates for aluminium is inclusive of all fasteners required for fabrication and fixing in the walls. 2) All joints shall be of mittered Joints. 3) A long M.S rod threaded at both ends to be provided in all aluminium door shutters in Top & bottom Horizontal members internally connecting Vertical members and fixed with M.S washers & nuts. 4) Only Aluminium members alone shall be measured and paid for. | 1,750 | KG | 540 ₹9,45,000 Lowest | 540 ₹9,45,000 Lowest |
| 3.00 | Providing and fixing 12mm thick prelaminated with decorative lamination on both sides, 3 layer medium density (Exterior grade) particle board Grade-I, Type – II confirming to IS:12823 bonded with phenol taging yde synthetic resin of approved brand and manufacture in taging fixed in aluminium doors, window shutters and partition frames with C.P brass /stainless screws etc. complete as per drawings and as directed by Engineer-in-Charge. | 240 | Sqm | 1,100 ₹2,64,000 Lowest | 1,150 ₹2,76,000 |
| 4.00 | Providing and fixing taging aluminium Baby Latch of size 100x10mm ISI marked (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc | 15 | No. | 100 ₹1,500 Lowest | 150 ₹2,250 |
| 5.00 | Providing and fixing IS:12817 marked stainless steel butt hinges of size 125 x 64 x 2.5mm (heavy weight) “GARG” or equivalent approved make with suitable stainless steel screws etc. complete all as per specifications and as directed by the Engineer-in-Charge. | 60 | No. | 200 ₹12,000 Lowest | 200 ₹12,000 Lowest |
| 6.00 | Providing and fixing Anodised Aluminium handles 125mm with plate 175 x 32mm including fitting with necessary screws complete all as per specification and as directed by the Engineer-in –Charge. Sample to be approved by the Engineer-in-Charge. | 30 | No. | 150 ₹4,500 Lowest | 200 ₹6,000 |
| 7.00 | Providing and fixing Al hanging Heavy Quality floor door stopper ISI marked with Twin Rubber stoppers, taging (anodic coating not less than grade AC10 as per IS:1868) transparent or dyed to req. colour or shade with necessary screws etc. complete all as per specification and as directed by the Engineer-in –Charge. Sample to be approved by the Engineer-in-Charge. | 15 | No. | 120 ₹1,800 Lowest | 175 ₹2,625 |
| 8.00 | Providing and fixing IS: 3564 marked Al die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. in wooden doors / steel doors with necessary bolts & nuts “Everite/ Hardwyn” or approved equivalent make complete as per specifications and as directed by the Engineer-in-Charge. | 15 | No. | 1,600 ₹24,000 Lowest | 1,700 ₹25,500 |
| 9.00 | Supply of 6 MM / 5 MM MS Chequered plate IS 2062 | 6,000 | Kg | 82 ₹4,92,000 Lowest | 90 ₹5,40,000 |
| 10.00 | Supply of I Bean MS ( ISMB) MB 200 ( 200 X 90) Is 2062 | 1,452 | Kg | 80 ₹1,16,160 Lowest | 90 ₹1,30,680 |
Tender Value
₹28.0 L
EMD Value
₹55,978
Closing Date
25 Feb 2025, 10:00 amClosed
Senior Maintenence Engineer (MM)
SME (MM), MAPS, NPCIL, Kalpakkam
Supply, Fabrication , Erection of support Structure, Platform, HVAC Ducting and Aluminium Partition for MM Shop Annexure at MAPS site.
2025_NPCIL_225574_1
MAPS/CTC/MM/PUBLIC/ET895/2024
Open Tender
Metal Fabrication
Item Rate
120 days
MAPS, Kalpakkam
Welding and/ or Fabrication of Piping or structural steel works, Installation of piping and/or structural steel works, Ducting work, Aluminum Frame work / Partition work in any industry or organization.
6 documents required · 6 mandatory
₹0
₹55,978
Office of Head (CTC), MAPS
15 Sept 2025
4 Feb 2025
26 Feb 2025
4 Feb 2025
25 Feb 2025
19 Feb 2025
4 Feb 2025 - 16 Feb 2025
18 Feb 2025
Amount
Pre fabrication, Edge preparation ,Fit up , welding & erection of Structure,Platform,HVAC Ducting & supports as per Drawing & Dimensions as per Technical specifications
Providing and fixing anodized aluminium (Anodised transparent or dyed to required shade according to IS:1868 Minimum Anodic coating of grade AC 15) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z Sections and other sections of approved make confirming to IS:733 and IS:1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling , C.P brass / stainless screws all complete as per architectural drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required. (fittings, Glazing and taging shall be paid for separately) NOTE : 1) The rates for aluminium is inclusive of all fasteners required for fabrication and fixing in the walls. 2) All joints shall be of mittered Joints. 3) A long M.S rod threaded at both ends to be provided in all aluminium door shutters in Top & bottom Horizontal members internally connecting Vertical members and fixed with M.S washers & nuts. 4) Only Aluminium members alone shall be measured and paid for.
Providing and fixing 12mm thick prelaminated with decorative lamination on both sides, 3 layer medium density (Exterior grade) particle board Grade-I, Type – II confirming to IS:12823 bonded with phenol taging yde synthetic resin of approved brand and manufacture in taging fixed in aluminium doors, window shutters and partition frames with C.P brass /stainless screws etc. complete as per drawings and as directed by Engineer-in-Charge.
Providing and fixing taging aluminium Baby Latch of size 100x10mm ISI marked (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc
Providing and fixing IS:12817 marked stainless steel butt hinges of size 125 x 64 x 2.5mm (heavy weight) “GARG” or equivalent approved make with suitable stainless steel screws etc. complete all as per specifications and as directed by the Engineer-in-Charge.
Providing and fixing Anodised Aluminium handles 125mm with plate 175 x 32mm including fitting with necessary screws complete all as per specification and as directed by the Engineer-in –Charge. Sample to be approved by the Engineer-in-Charge.
Providing and fixing Al hanging Heavy Quality floor door stopper ISI marked with Twin Rubber stoppers, taging (anodic coating not less than grade AC10 as per IS:1868) transparent or dyed to req. colour or shade with necessary screws etc. complete all as per specification and as directed by the Engineer-in –Charge. Sample to be approved by the Engineer-in-Charge.
Providing and fixing IS: 3564 marked Al die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. in wooden doors / steel doors with necessary bolts & nuts “Everite/ Hardwyn” or approved equivalent make complete as per specifications and as directed by the Engineer-in-Charge.
Supply of 6 MM / 5 MM MS Chequered plate IS 2062
Supply of I Bean MS ( ISMB) MB 200 ( 200 X 90) Is 2062
Supply of MS Channel ISMC 75 X 40 IS 2062
Supply of MS Channel ISMC 100 X50 IS 2062
Supply ofGI Plane sheet 18 Gauge Thickness IS 277
FRIENDS ENGINEERING (BID ID -820566)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .