Re-tender for execution of work with material under M.W.(Con.) S.R. to Amrit Sarovar (Water Bodies) to Tank No. 2 at Buddhist Stupa Sanchi, Distt. Raisen (M.P.)

Vegetaional removal and uprooting the bushes and dried thin trees from enclose area of Tank wall including removal of bushes from close vicinity of the Tank No. 2 near Stupa No.2

Dewatering by unsing 10Hp motor pump as necessary for disilting of Tank No. 2

Desilting of tank No. 2 near stupa No.2 by excavation in hard settled soil, mud, silt, mixed kankar and small bounders to bring the original base of cement concerete including enclosure area between R.R. stone retaining wall and C.R. stone masonry facing wall split over drain over flow drain and stone pitching and disposal of executed earth away from the tank an exposed surface for use in a forestation of slope of Sanchi hill.

Providing and laying welded wire mess dia of wire 2.45mm block 25mm x 25mm reinforcement laid in position as per counters of back of C.R. stone enclosure walls of Tank No. 2 including cantering, shuttering etc. complete.

Providing and laying reinforcement concrete enclosure wall between R.R. stone retaining wall and C.R.stone facing wall in 1:2:4 (1 cement, 2 sand & 4 B.T. metal 10 to 20mm aggregate) with 2.45mm dia of wire block 25mm x 25mm welded wireless with acco proof 1 kg per bag cement and sand stone toning colour matching to rock excluding cost of reinforcement.

Restoration of C.R. stone facing masonry wall with 20% original C. R. stone and 80% new C.R. stone size 45x40x20cm in 1:1:1 (1 lime, 1 surkhi, and 1 sand) etc. complete.

Providing and laying R.R. stone masonry enclosure wall between reinforcement concrete and C.R. stone facing wall in 1:1:1 (1 lime, 1 surkhi and 1 sand) etc. complete.

Providing and laying 20cm thick stone pavemenet around the tank No.2 near stupa No.2

Pointing on stone work with 1:1:1 (1 lime, 1 surkhi and 1 sand) mixed with binding material, including colour matching in rock and surface cleaning etc. complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 13.99.1 one or more coats on old work.

Provision for providing and supply of stone benches with 150mm thick machine worn out sand stone platform size 1.80m x 0.60m sub post with two nos. sand stone size 0.50m x 0.15m x 0.75m fixing with 1:2:4 cement concrete block size 0.30m x 0.30m x 0.45m and pining with S.S. rod 10mm dia etc. complete as per approved design and the direction of Engineer-in-charges.