8646/GWL/E8 REPAIR/MAINTENANCE AND RE-UPHOLSTERING/CANING OF CERTAIN FURNITURE INCLUDING PAINTING/ POLISHING AT MORAR CANTT UNDER GE GWALIOR

Amount

SOFA SET OF SORTS : FD-281,373, FD-258:

Removing existing U/S cushion any type & in any position from Sofa single / three seater and provn of new cushion made of 100 mm thick 'U' foam, 40 density, ISI marked covered with best quality tapestry cloth of approved quality and colour (not less than Rs. 300/- per RM) duly wraped with long cloth of existing pattern and as per drgs and directed by GE/EIC. (Make of Foam Cushion:Sleepwell/ Springwell/Kurlon).

Replacement of front leg with S&F new front leg made out of Ist class hard wood (teak wood). For sofa single/three seater.

Replacement of side rail with S&F new side rail for seat made out of Ist class hard wood (teak wood) for Sofa single / three seater.

Replacement of front & back rail for seat with S&F new front & back rail made out of Ist class hard wood (teak wood) for Sofa single seater.

Replacement of side rail for back frame with S&F new side rails for back frames made out of Ist class hard wood (teak wood) for Sofa single seater.

Replacement of top and bottom rail for back frame with S&F new top and bottom rail made out of Ist class hard wood (teak wood) for Sofa single seater.

Replacement of front support rail with S&F new support rail made out of Ist class hard wood (teak wood) for Sofa single seater complete all as shown on drawings.

Replacement of Arm rest with S&F new Arm rest made out of Ist class hard wood (teak wood) for Sofa single seater / three seater complete all as shown on drawings.

Replacement of Batten with S&F new Batten made out of Ist class hard wood (teak wood) for Sofa single seater / three seater.

Replacement of front/ back rail with S&F new front / back rail for seat made out of Ist class hard wood (teak wood) for Sofa three seater.

Replacement of Top & Bottom rail for back frame with S&F new Top & Bottom rail made out of Ist class hard wood (teak wood) for Sofa three seater.

Replacement of front support rail with S&F new front support rail frames made out of Ist class hard wood (teak wood) for Sofa three seater.

Replacement of Bearers for seat and back frame with S&F new Bearers for seat and back frame made out of Ist class hard wood (teak wood) for Sofa three seater.

Dismantling, taking out carefully & replacement of old existing broken back leg of the Sofa single/three seater of sorts of any description, in any position & replacement of the same with S&F new back leg of Ist class hard wood (teak wood) made to shape, fixed in position all as shown on drawing, specified and directed by the Engineer-in-Charge.

M & L for preparation of old surfaces of Sofa three seater by grinding with grinding machine including filling of cavities with putty/filler/sealer and applying two coats of melamine polish of approved make with glossy finish by using spray machine complete all as specified and directed.

All as per item No. 1.15 here-in-before but Sofa single seater.

SOFA SINGLE SEATER WITH CUSHION ;- (FD/MAP-II/02)

Taking out U/S rear legs and provn of new rear legs made of 1st class HW and all as directed and shown on drg.

Taking out U/S front legs and provn of new front legs made of 1st class HW and all as directed and shown on drg.

Taking out U/S rails and provn of new rails made of 1st class HW and all as directed.

Taking out U/S seat frame and provn of new seat frame made of 1st class HW including the horizontal wooden battens duly fixed with 12mm thick plywood BWR and polishing the wooden portion with Melamine polish complete all as directed. (Make of BWR plywood :- Archidlam/ Greenlam/ Century).

Taking out U/S back frame and provn of new back frame made of 1st class HW including the horizontal wooden battens duly fixed with 12mm thick plywood BWR and polishing the wooden portion with melamine polish complete all as directed.(Make of BWR plywood :- Archidlam/ Greenlam/ Century).

Taking out U/S arm and provn of new arm made of 1st class HW all as directed.

Removing u/s cushion and provn of new cushion made of 100 mm thick 'U' foam, 40 density,ISI marked of size 530mmx560mm and covered with best quality tapestry cloth of approved quality and colour (not less than Rs. 300/- per RM) duly wraped with long cloth of existing pattern and as directed. (Make of Foam Cushion:Sleepwell/Springwell/Kurlon).

CHAIR EASY OF SORTS, Chair easy with detachable cushion : FD-17, FD-201, FD-229, FD-358, FD-1108, DB-3972

Dismantling, taking out carefully old existing broken back leg of the chair Easy of sorts of any description & replacement of the same with S&F new back leg of Ist class HW (teak wood) made to shape, fixed in position all as shown on drg, specified and directed.

Replacement of front leg with S&F new front leg made out of Ist class HW (teak wood).

Replacement of side rail with S&F new side rail for seat made out of Ist class HW (teak wood) with holes for weaving. The spacing of holes shall match with the existing rail on other side.

Replacement of front & back rail for seat with S&F new front & back rail made out of Ist class HW (teak wood) with holes for cane weaving. The spacing of holes shall match with the existing rail on other side.

Replacement of side rail for back frame with S&F new side rails for back frames made out of Ist class HW (teak wood) with holes for cane weaving. The spacing of holes shall match with the existing rail on other side.

Replacement of top and bottom rail for back frame with S&F new top and bottom rail made out of Ist class HW (teak wood) with holes for cane weaving. The spacing of holes shall match with the existing rail on other side.

Replacement of front support rail with S&F new support rail made out of Ist class HW (teak wood) complete all as shown on drg.

Replacement of Arm rest with S&F new Arm rest made out of Ist class HW (teak wood) complete all as shown on drg.

Replacement of rubber/PVC shoe with S&F new hard rubber/ PVC shoe of superior quality with Steel plated screws of size 20mm long complete as approved and all as shown on drg.

Provn of new angular bracket with 04 Nos steel screws suitable size of Ist class HW (teakwood) of size 75mm x 75mm x 25mm complete as approved and all as shown on drg.

Recanning of Chair Easy of sorts with 2mm wide new plastic cane (Make Shah Brand) in Godrej pattern.

Polishing two coats to old and one coat to new surfaces of Chair Easy of sorts after repairs with melamine polish of approved Make including preparation of surfaces.

Removing u/s cushions from Chair easy with detachable cushion and provn of new cushions made of 75 mm thick 'U' foam, 40 density, ISI marked with leatherised rexene of approved shade and texture as directed.

CHAIR DINING OFFICER (MAP) FD/MAP-II/04

Removing old broken/U/S front legs from chair dining and S & F new front legs of Ist class hard wood teak wood as per shape and size shown in drawing complete all as specified and directed.

All as per srl item No. 4.01 here-in-before but rear leg.

All as per srl item No. 4.01 here-in-before but front/ back/ side rail.

All as per srl item No. 4.01 here-in-before but back teak wood strip of size 30x15mm of suitable length.

All as per srl item No. 4.01 here-in-before but stiffner.

Removing old U/S foam cushioned seat from existing chair dining cushioned and S & F new 75 mm thick ,40 density foam seat of (Make: Sleepwell/Springwell/Kurl-on) to chair dining duly covered with tapestry Cloth(Make: D'decor/ Bombay Dyeing) of range not less than Rs.300.00 per meter, colour, shade and quality of tapestry Cloth shall be as approved by EIC & GE complete all as specified and directed.

S & F new wooden bracket/corners of suitable size made of Ist class hard wood teak wood to Chair dining cushioned and screwd with railing for extra strength including melamine polish complete all as directed.

Polishing two coats to old and one coat to new surfaces of chair dining after repairs with melamine polish of approved Make including preparation of surfaces.

CHAIR WRITING OFFICERS : FD/E6/MAP/12

Removing U/S damaged Seat & back of Chair writing. S & F new seat & back made of 12 mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all round. The polyurethane foam shall be 50 mm thick and shall be moulded with density 50-55 Kg per cubic mtr on Hampden machine.

Removing old U/S arm rest of chair writing officer and S&F new arm made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed.

Taking out U/S /broken frame and S&F new frame as per drg duly painted as per drg and as directed by EIC.

Welding work wherever required as directed by EIC

Painting to all steel portion of chair writing with one coat of synthetic enamel black paint after cleaning, dusting and scratching the entire metal surface of chair with sand paper, making surface neat and smooth.

Sofa 3 seater with cushion ;-(FD/MAP-II/02)

Taking out U/S rear legs and provn of new rear legs made of 1st class HW and all as directed.

Taking out U/S front legs and provn of new front legs made of 1st class HW and all as directed.

Taking out U/S long rails and provn of new long rails made of 1st class HW and all as directed.

Taking out U/S short rails and provn of new short rails made of 1st class HW and all as directed.

Taking out U/S seat frame and provn of new seat frame made of 1st class HW including the horizontal U/S wooden battens duly fixed with 12 mm thick plywood BWR and polishing with melamine polish complete all as directed. (Make of BWR Ply: Archidlam/ Greenlam/ Century).

Taking out U/S back frame for 3 seaters and provn of new back frame made of 1st class HW including the horizontal U/S wooden battens duly fixed with 12 mm thick plywood BWR and polishing with melamine polish complete all as directed.(Make of BWR Ply: Archidlam/ Greenlam/ Century).

Taking out U/S arm and provn of new arm made of 1st class HW all as directed.

Removing u/s cushion and provn of new cushion made of 100 mm thick 'U' foam, 40 density,ISI marked of size 530mmx560mm and covered with best quality tapestry cloth of approved quality and colour (not less than Rs. 400/- per RM) duly wraped with long cloth of existing pattern and as directed. (Make of Foam Cushion:Sleepwell/Springwell/Kurlon).

CHAIR COMPUTER : FD/E6/MAP/01

Removing U/S damaged Seat & back of Chair computer, S & F new seat and back made of 12 mm thick hot pressed plywood (Make of ply-Make: Archid Ply/ Green Ply/ Century Ply) upholstered with fabric and moulded polyurethane foam Make: Sleepwell/Springwell/Kurl-on with PVC lipping all round. The polyurethane foam shall be 50 mm thick and shall be moulded with density 50-55 Kg per cubic Mtr on Hampden machine, all as directed and specified.

Removing old U/S arm rest of chair computer and S&F new one made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed.

Removing U/S 5 star base and S&F new SS 5 star base suitable for chair computer all as directed.

Removing U/S castor twin wheels and S&F new castor twin wheel suitable for chair computer all as directed.

Removing U/S adjustable tilting mechanism and S&F new adjustable tilting mechanism shall be forward tilt, self regulating tilt tension and manual override, 4 position tilt lock. Anti shock back mechanism to prevent backrest. 360 swivel mechanism to allow with fluid lateral movement suitable for chair computer all as specified and directed.

Painting to all steel portion of chair computer with one coat of synthetic enamel black paint after cleaning, dusting and scratching the entire metal surface of chair with sand paper ,making surface neat and smooth.

CHAIR VERANDAH:- FD-256,259,19 and FD/MAP-II/06 & FD/MAP/12

Removing the existing U/S cane/niwar plastic from the seat and back of chair and recanning the seat and back of chair with plastic cane 3.5mm to 4mm wide of 1st quality, white colour in pure godrej pattern. The canning of chairs shall only be carried out after complete painting process as specified in drg. MAKE OF CANE- SHAH,PREMIER

M & L for removing old U/S MS strip from seat & back of Chair Verandah and S & F new MS Strip 3mm thick duly painted with two coats of paint over a coat of red-oxider primer complete all as per the drawing & as directed.

Removing the existing U/S/broken PVC seat and back from the chair verandah MAP(officer), S & F new PVC seat and back 4mm thick to the chair verandah MAP(officer) after providing flat iron 20mmx4mm support in centre of seat only by proper welding for support of PVC seat.The PVC seat shall got approved from GE before supply. MAKE OF PVC SEAT –AMKO/ COMFO/ HARMONY

Removing the existing U/S/broken PVC seat and back from the chair verandah MAP(JCO/ORs), S & F new PVC seat and back 4mm thick to the chair verandah MAP (JCO/ORs) after providing flat iron 20mmx4mm support in centre of seat only by proper welding for support of PVC seat.The PVC seat shall got approved from GE before supply. MAKE OF PVC SEAT –AMKO/ COMFO/ HARMONY

Removing the old broken shoes of chairs and S & F best quality new PVC shoes to the legs of chair.

Painting to chair verandah with one coat of synthetic enamel white paint after cleaning, dusting and scratching the entire metal surface of chair with sand paper, making surface neat and smooth for caning.

Notes: 1). Removal of existing U/S material carefully without disturbing the adjoining parts from furniture articles as mentioned ,Supply and fixing new parts as per given specification and drg after tightening the joints, pinning, screwing, nailing, welding, gluing,providing hinges, applying putty for leveled surface, placing every part in-tact including polishing/painting the entire article with standard workmanship and as directed by GE/Engr-in-Charge.All furniture items is to be painted /poilshed only after making the entre item intact by tightening the joints.. 2). Work will be executed inside Barrack Store yard of GE Gwalior and at various sites as per requirement. 3). It is the responsibility of the contractor to lift the furniture from store godowns/sites for repair and to keep it back in store godowns/sheds in a systematic manner. It is the part of CA and to be included in the quoted rates by contractor. 4). All Timber shall be of 1st class fully seasoned hard teak wood free from knots and cracks. 5). Prelaminated MDF boards shall be exterior grade of approved make/brand and shall confirm to IS-12406 6). Commercial ply shall be BWR grade of approved make/brand and shall confirm to IS-303. 7). All other material to be incorporate in the work shall be of latest IS standard specification. 8). Anti-termite and anti-bug treatment shall be done before polishing the wooden item.

M/S MUKESH AGARWAL

M/s Manish Contractor

SHREE SAI LABOUR CONTRACT CO-OPERATIVE SOCIETY LTD