Loading…
Loading…
Tender Value
₹15.3 L
EMD Value
₹38,275
Closing Date
8 Dec 2025, 9:30 pmClosed
Directorate of Municipal Administration
VITTAL M TUBAKE
08362213834
Zone 07, Laying of UGD line at Rajendra nagar kalal cycle shop & P nagar near Shri. Goudar & Shri. Raibhagi House in ward no 51, Hubli
DMA/2025-26/WS/WORK_INDENT43488/CALL-4
DMA/2025-26/WS/WORK_INDENT43488/CALL-4
Open
Water supply/sewage lines
Electronic Documents, First(One Cover)
DMA City Corporation Hubballi-Dharawada
7 documents required · 7 mandatory
₹500
₹38,275
14 Nov 2025
14 Nov 2025
15 Nov 2025
Zone 07, Laying of UGD line at Rajendra nagar kalal cycle shop & P nagar near Shri. Goudar & Shri. Raibhagi House in ward no 51, Hubli
Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 m3 in volume and stock piling at designated locations and disposal of dismantle...
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...
Providing, lowering, laying, jointing, testing and commissioning of Glazed Stone Ware Pipes of following dia, conforming to IS 651:1992, IS 4127 with latest amendments, including conveying to work sit...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...
Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the ch...
Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the ch...
Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the ch...
Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the ch...
Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the ch...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
Providing, laying, spreading and compacting graded stone ggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material...
Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), c...
Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
kw1 43488.doc
Tender Document • 0.83 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].