REPAIRS TO SUNKEN FLOOR VERTICAL STACKS INCLUDING REPAIR TO INTERNAL FLOORING AND ALLIED WORKS AND REPAIRS TO JOINERY INCLUDING ALUMINIUM WORKS AND ALLIED ITEMS IN THE BLDGS OF AF UNDER AGE BR II AT AF STATION AVADI

Amount

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided and removing the debris off the premises all as specified and as directed.

Material and labour for cement concrete (1:5:10) type E-2 (using 40 mm graded granite stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

Material and labour for 15mm thick rendering in CM 1:3 mixed with WPC on concrete/brick surface in sunken portion finished even and smooth without using extra cement. Note:- WPC shall be measured (as supply only) and paid seaparately.

Supply only integral Water proofing compound.

Material and labour for cement concrete(1:2:4) type B0 (using 12.5mm graded granite stone aggregate), 25mm thick, as in flooring/ base of floors complete all as specified and as directed.

Material and Labour for applying evenly a tack coat of industrial bitumen 85/25 grade at the rate of 1.2 kg per sqm applied over a coat of primer @ 0.70 kg/sqm over cleaned plastered surfaces complete all as specified & directed.

Material and labour for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) and laid on primed surface by forced application complete all as specified and as directed.

Supply and fix Vitreous China squating Pan Orissa pattern of size 580 x 440 mm white with integral foot rest including connecting to flush pipe etc., complete all as specified and as directed.

Supply and fix in repairs, Vitreous China wash down water closet pan (pedestal pattern) white(excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe, anti symphonize pipe etc., including provision of Plastic water closet seat, black, closed pattern with flat bottom, cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

Demolition of floor hearth or wall tiling including cement mortar bedding (but not backing coat) and removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Material and labour for Non skid light coloured ceramic tiles 7 to 8mm thick (Square/Rectangular) area of each tiles exc. 0.06 sqm but not exc. 0.11 sqm, in floors etc, confirming to IS: 15622 : 2006 grade B II (a) matt superior finish flooring, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15 mm thick in CM 1:4 as bedding layer for floor finishes complete all as specified and as directed.

Material and labour for Non skid light coloured ceramic tiles 7 to 8mm thick (Square/Rectangular) area of each tiles exc. 0.06 sqm but not exc. 0.11 sqm, on vertical surfaces as in skirting etc, confirming to IS: 15622 : 2006 grade B II (a) matt superior finish skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 10 mm thick rendering in CM 1:3 for skirtings etc., complete all as specified and as directed.

Material and labour for Non skid light coloured ceramic tiles 7 to 8mm thick (Square/Rectangular) area of each tiles exc. 0.11 sqm but not exc. 0.18 sqm, in floors etc,confirming to IS: 15622 : 2006 grade B II (a) matt superior finish flooring, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15 mm thick in CM 1:4 as bedding layer for floor finishes complete all as specified and as directed.

Material and labour for Non skid light coloured ceramic tiles 7 to 8mm thick (Square/Rectangular) area of each tiles exc. 0.11 sqm but not exc. 0.18 sqm, on vertical surfaces as in skirting etc, confirming to IS: 15622 : 2006 grade B II (a) matt superior finish skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 10 mm thick rendering in CM 1:3 for skirtings etc., complete all as specified and as directed.

Material & Labour for Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over 15 mm thick Screed bed or bedding layer in CM 1:4 etc., complete all as specified and as directed.

Material and labour for Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and includiing rendering in CM 1:4, 15mm thick on fair faces of brick/concrete wall surfaces etc., complete all as specified and as directed.

Material and labour for Glazed ceramic coloured tiles of 300x200x7mm thick tiles on vertical surfaces using glazed economy finish grade B III ceramic tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match over and includiing rendering in CM 1:3, 10mm thick on fair faces of brick/concrete wall surfaces complete all as specified and as directed.

Material and labour for Glazed ceramic coloured tiles of size 350 x 250 x 7 mm / 450 x 350 x 7 mm thick tiles on vertical surfaces using glazed economy finish grade B III ceramic tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match over and includiing rendering in CM 1:3, 10mm thick on fair faces of brick/concrete wall surfaces complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar all as directed.

Material & Labour for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite; complete all as specified and as directed.

Material & Labour for 20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite; complete all as specified and as directed.

Taking down shutters of any description exc 1 Sqm & not exc 2 Sqm and easing, adjusting and also refixing builders hardware as required and replacing unserviceable screws and refixing the shutter in the same opening including painting disturbed surface / touch-up to match with the existing colour; complete all as specified and as directed.

Supply and fix in repairs, PVC valveless syphonic action type, flushing cistern 10 litres capacity low level, white, with inlet, ball valve, float and handle including brackets, flush pipe and all accessories all as directed.

Supply and fix in repairs, PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement etc., complete all as directed and as directed.

Supply and fix Unplasticised PVC pipes of 15mm bore of pressure rating 10 kgf/cm2 with all fittings and fixtures such as elbows, Tees, unions, clamps etc., fixed to wall/ ceiling or laid on floor; including taking down the existing unserviceable pipe etc., complete all as specified and as directed.

Supply and fix Unplasticised PVC pipes of 20mm bore of pressure rating 10 kgf/cm2 with all fittings and fixtures such as elbows, Tees, unions, clamps etc., fixed to wall/ ceiling or laid on floor; including taking down the existing unserviceable pipe etc., all as specified and as directed.

Supply and fix in repairs, Bib taps standard of PTMT 15mm dia (Any colour) high pressure screwed down for iron pipe or for brass ferrule complete all specified and as direted. (Minimum weight 90 grms)

Supply and fix pillar tap of PTMTany colour fancy type 15mm bore dia screwed for iron pipe complete all specified and as directed. (Minimum weight 15mm - 120gm)

Supply and fix in repairs Angle Stop valve of PTMT any colour high pressure screwed for iron pipe complete all specified and as directed. (Minimum weight 90gms)

Supply and fix in repairs Swivel shower of PTMT any colour for fixing with 15 mm pipe (Minimum weight 40 gms) including Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms) etc., complete all specified and as directed.

Supply and Fix in repairs, 15mm bore Bib taps, fancy type, cast copper alloy chromium plated screwed down, screwed for iron pipe or for brass ferrules, complete all as specified and as directed.

Supply and Fix in repairs, 15mm bore Pillar tap, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe, complete all as specified and as directed.

Supply and Fix in repairs, 15mm bore Angle cock, fancy type, chromium plated fancy type cast copper alloy, screwed down high pressure, screwed both ends for iron pipes or for unions and fixed complete all as specified and as directed.

Supply and Fix in repairs, 15mm bore Stop cock, fancy type, chromium plated, cast copper alloy, with long shank and cup (concealed type) screwed down high pressure, screwed both ends for iron pipes or for unions and fixed complete all as specified and as directed.

Supply and fix in repairs, 125mm Brass Chromium plated shower roses with or without swivel joints, including fixing to steel pipe or union all as specified and as directed.

Supply and fix in repairs, Grating 150 mm dia of PTMT (Mimimum weight 100 gms) with or without dome.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) all as directed.

Supply and fix PVC (SWR) pipe 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with suitable clamps complete all as specified and as directed.

Supply and fix PVC (SWR) pipe 110 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with suitable clamps complete all as specified and as directed.

Supply and fix PVC(SWR) branch piece, single (single Y) equal or unequal for 75mm bore, with access door.

Supply and fix PVC(SWR) branch piece, single (single Y) equal or unequal for 110mm bore, with access door.

Supply and fix PVC(SWR) bends any radius suitable for pipe of 75mm bore.

Supply and fix PVC(SWR) bends any radius suitable for pipe of 110mm bore.

Taking down chowkats or frame exc. 1.50 sqm but not exc 4.00 sqm each with shutter (without taking of shutter from the frame) complete all as specified and as directed.

Taking down Chowkhats or frames not exc 1.5 sqm each but with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down shutters of any description exc 1 Sqm & not exc 2 Sqm each complete all as specified and as directed.

Taking down shutters of any description not exc 1 Sqm each complete all as specified and as directed.

Supply and fix second class hard wood plain, solid, straight, chowkats and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

Supply and fix small articles of mild steel such as hold fast, etc conforming to Fe-290 Gde E-165 complete all as specified and directed.

Material and labour for preparing and treating ends of posts, back of chowkats with coal tar black paint, area tarred exc. 0.10 sqm but not exc. 0.50 sqm all as specified and as directed.

Material and labour for PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in coping / bed block etc., including necessary formwork etc., complete all as specified and as directed.

Material and labour for preparing and treating small articles such as hold fasts with coal tar black paint, area tarred not exc. 0.10 sqm all as specified or as directed.

Supply and fix 35mm thick, 2nd class hard wood Plain framed factory made Panelled shutter ( any number of panels), with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and as directed.

Supply and fix 35mm thick, 2nd class hard wood, glazed and skeleton shutters (Partly Panelled and Partly Glazed), open rebated and prepared to receive glass, gauze etc,(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc size of members of shutters as specified in SSR part I, section 8, clause 8.24(a) complete all as specified and as directed.

Supply and fix 30mm thick 2nd class hard wood Glazed and skeleton shutters for windows, open rebated and prepared to receive glass, gauze etc, but divided into squares, with styles and rails plain, chamfered or rounded, mitred and rebated sash bars any numbers for securing glass etc sizes of members of shutters as specified in SSR part I, section 8, clause 8.24 (b) complete all as specified and as directed.

Supply and fix 35 mm thick Flush door shutter, solid core construction with block board core and plywood face panels commercial type on both side complete all as specified and as directed.

Material and labour for Preparation of new wood surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer all as specified and as directed.

Taking down shutters of any description exc 1 Sqm & not exc 2 Sqm and easing, adjusting and also refixing builders hardware as required and replacing unserviceable screws and refixing the shutter in the same opening including painting disturbed surface / touch-up to match with the existing colour; complete all as specified and as directed.

Supply and fix solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge mitre cut at two corners and joined by inserting two Nos of 150mm long brackets of 15mmx15mm MS square tube inside the 19mm MS square tube and suitably screwed complete all as specified and as directed.

Supply and fix factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick(styles) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on front face and 2mm plain colour PVC sheet on backface, supplying and fixing in frame at site as per specification complete all as specified and as directed.

Supply and fix Galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed

Supply and fix 100mm size, butt hinge medium weight cold rolled mild steel & fixed complete all as specified and as directed.

Supply and fix in repairs 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised & fixed, type B-21 complete all as specified & directed.

Supply and fix 300 mm long Aluminium alloy anodised sliding door bolts with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium and fixed all as specified and as directed.

Supply and fix for 150mm length aluminum, anodised, barrel tower bolts of extruded section and fixed.

Supply and fix for 75mm length aluminum, anodised, barrel tower bolts of extruded section and fixed.

Supply and fix 150mm size aluminum handles, cast type anodised complete all as specified & directed.

Supply and fix 100mm size aluminum handles, cast type anodised complete all as specified & directed.

Supply and fix floor door stopper 150mm size of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor all as specified and as directed.

Supply and fix 300mm long ordinary rat rail rod pattern springs including roller and roller plate complete all as specified & directed.

Supply and fix in repairs Steel window of profile frame 80mmx40mm fabricated out of 1.25mm thick MS sheet and shutters made out of F7D-Z section as per IS 1038 (Double shutter i.e one mosquito proof shutter and one glazed shutter) including spring latches, for glazed shutters, flat latches for mesh shutter, box type hinges with necessary holdfast etc including Guard bar & filling the frame with PCC 1:3:6 type C-0 complete including two coats of synthetic enamel paint over one shop coat of red oxide primer for steel surfaces all as specified ad directed. Note : Supply and fix of glass pane, wiremesh, painting shall be measured and paid separately.

Supply and fix 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm.m in each pane.

Material and labour Preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over steel surfaces having shop coat complete all as specified & directed.

Material and labour Preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified & directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Supply and fix mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; and similar work con forming to Fe.290.Gde-E-165 all as specified and as directed.

Hacking out old broken glass (any size, quality or description) from wooden frames, glazed with putty or beads.

Hacking out old broken glass (any size, quality or description) from metal frames, glazed with putty, including punching or drilling out old glazing pins/spring clips all as specified and as directed.

Supply and fix 4mm thick figured glass pin headed type and glazing with oil putty in squares not exc 0.5 sqm in each pane.

Supply and fix in repairs Galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks,or galvanised wire staples complete all as specified and as directed

Supply and fix in repairs mild steel 300mm ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and as directed.

Supply and fix in repairs 100mm size, butt hinge medium weight cold rolled mild steel & fixed complete all as specified and as directed.

Supply and fix in repairs 300 mm long Aluminium sliding door bolts with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium and fixed all as directed.

Supply and fix in repairs for 200mm length aluminum, anodised, barrel tower bolts of extruded section and fixed all as directed.

Supply and fix in repairs for 150mm length aluminum, anodised, barrel tower bolts of extruded section and fixed all as directed.

Supply and fix in repairs 150mm size aluminum handles, cast type anodised complete all as specified and as directed.

Supply and fix in repairs floor door stopper 150mm size of aluminium alloy body and tongue, anodised, with hard drawn rod fixed in floor complete all as directed.

Supply and fix in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished all as specified and as directed.

Material and labour in repairs for 18/19mm thick prelaminated particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with scruwes to timber frame work for cub board shutter etc.. all as specified and as directed.

Supply and fix teak wood lipping 18-19mm wide and 6mm thick to particle board shutters for cupboards fixed with nails.

Supply and fix in repairs particle boards 18/19mm thick interior grade BWR type adhesive, fixed with screw to timber frame as in shelves, drawers etc, all as specified and as directed .

Supply and fix in repairs, 100mm Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified & directed.

Supply and fix 100mm Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified & directed.

Supply and fix in repairs for Harrison Curtain rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. in repairs all as specified and as directed.

Material and labour, in repairs, for second class hardwood plain fillets, square, rectangular or triangular in section of sectional area exc 13 and not exc 25 sqcm clean sawn fixed with screws in kitchen cabinets/cupboards etc all as directed.

Supply and fix in repairs Mild Steel handle right or left suitable for Mild Steel window duly painted with two coats of stove enamelled paint etc. complete all as directed.

Supply and fix in repairs Stainless steel plate rack of size 900X800X230mm with screws and necessary fittings including cutting hole fix to wall complete all as specified and directed.

Supply and fix in repairs anodised aluminium powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc., complete; all as specified and as directed.

Supply and fix anodised powder coated aluminium window shutters (minimum thickness of powder coating 50 micron), fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, etc. complete all as specified & directed.

Supply and fix in repairs powder coated aluminium designer grill (minimum thickness of powder coating 50 micron) of 5.5 mm thick and 10 mm width and aperture of 75 mm fixed with suitable screws and including aluminium powder coated channel section of suitable size having thickness not less than 1.5mm etc., complete; all as specified and directed.

Supply and fix powder coated anodised aluminium door shutters (minimum thickness of powder coating 50 micron), aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws, etc. complete all as specified & directed.

Supply and fix aluminium (Die cast) body door closer hydraulically regulated designation No.3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg & fixed complete all as specified & directed.

Supply and fix in repais, aluminium (Die cast) body door closer hydraulically regulated designation No.3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg & fixed complete all as specified & directed.

Material and labour for 12mm thick prelaminated particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to aluminium frame work shutter.etc all as specified and as directed.

Supply and fix for 5.5mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.50 Sqm in each pane complete all as specified and as directed

Supply and fix aluminium rebated mortice lock vertical type size 100mm four lever complete all as specified & directed.

Supply and fix in repairs, Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and as directed.

SWIFTTECH ENGINEERS INDIA PVT LIMITED

pmv.enterprises

S K ENTERPRISES