Periodical services and Plastering works to certain buildings and Repair to Steel Gate Rolling Shutters Grill Grating etc in Technical Area at Air Force Station Pathankot

Amount

M&L for preparation of plastered or un plastered old decorated surfaces of walls by removal of nails etc & filling cracks/hole and applying distempering with 1st quality acrylic distemper having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour in two coats with auto paint-roller complete, as per manufacturer's specification. complete all as specified & directed by Engineer-in-Charge.

M&L for complete removal of existing treatment and preparation of plastered or un plastered old decorated surfaces of ceiling by filling cracks/hole by applying wall care putty for smooth surface and applying one coat oil emulsion distemper white or coloured with auto paint-roller complete all as specified & directed by Engineer-in-Charge.

M&L for preparation of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old painted surfaces of steel & steel based surface of any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of plastered or old decorated external surface of walls, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oily and greasy spots by scraping and washing with water and for applying two coats of Acrylic exterior emulsion paint with Silicone additives of including priming coat in camouflage pattern or more shades as directed by Engr-in-Charge including necessary scaffolding and other safety arrangement to work at any height at site if required.complete all as specified and as directed by the Engr-in-Charge.

M&L for preparation old decorated external surface of roofs, AC sheet roofs and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oily and greasy spots by scraping and washing with water and for applying two coats of Acrylic exterior emulsion paint with Silicone additives of including priming coat in camouflage pattern or more shades as directed by Engr-in-Charge including necessary scaffolding and other safety arrangement to work at any height at site if required.complete all as specified and as directed by the Engr-in-Charge.

M&L for complete removal of existing surface and preparation old decorated surfaces of walls and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oily and greasy spots by scraping and washing with water and applying two coat of white wash with auto paint-roller including filling cracks repairing minor damages in plasters complete all as specified and as directed by the Engr-in-Charge complete all as specified and as directed by the Engr-in-Charge

Taking down cement plaster of any description on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc complete all as specified.

M&L for 15 mm thick rendering in cement mortar 1:4 by using manufacture/washed plaster sand on fair faces of brick work or concrete surfaces, including finishing even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for 5 mm thick rendering in cement mortar 1:3 by using manufacture/washed plaster sand on fair faces of concrete/ceiling surfaces, including finishing even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for 10 mm thick rendering in cement mortar 1:6 by using manufacture/washed plaster sand on other than fair faces of brick or concrete surfaces, including finishing even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of plastered surfaces of ceiling by applying two coats of oil emulsion distemper over a coat of primer complete all as specified & directed by Engineer-in-Charge.

M&L preperation of newely plastered surface and Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) in camouflage pattern (four) or more shades as directed by Engr-in-Charge including necessary scaffolding and other safety arrangement to work at any height at site if required.

M&L for preparation of newely plastered or un plastered decorated surfaces of walls by Providing and applying cement based well putty 1.5 mm thickness over plastered surface to prepare the surface even and smooth (multi purpose mixer shall be used for uniform and proper mixing of putty) Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour in two coats with auto paint-roller complete, as per manufacturer's specification. by auto roller complete all as specified & directed by Engineer-in-Charge.

M&L for single component polymer modified repair mortar with compressive strength minimum 38 MPA at 28 days (ASTM C 109:99) and tensile strength minimum 2.5 Mpa (ASTM C 307) in a single coat @ including Applying epoxy bonding agent and making good with polymer modified plaster and micro concrete as required thickness over a coat of rust removing alkaline primer and match the finishing to the existing surface as following given below Modified plaster 10 mm to 20 mm thick as per manufacturer instructions complete all as directed. Make Fosroc, Sikka or equivalent.

Demolition of reinforced Concrete in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work.

M&L reinforced cement concrete (nominal mix) type B1 1:2:4 using 20 mm graded crushed stone aggregate as in chajjas, facia etc complete all as specified directed by Engineer-in-Charge.

M&L Formwork to chullah hoods, chajjas, troughs and similar items including edges on flat surface complete all as specified and directed by Engineer-in-Charge.

M&L for mild steel TMT bars 10mm dia and over cut to length bent to shape as reqd , incl crancking bending ,spirally for hooping columns hooking ends and binding with and including mild steel wire not less than 0.9 mm dia. The rates for fixing the bars by making holes on wall/ beam or tying with existing bars in included in the quoted rate and no extra shall be admitted at a laterdate in this respect.

M&L for mild steel TMT bars 5mm dia and over upto including 10mm cut to length bent to shape as reqd ,as in stirrups and spacers.

Overhauling of rolling shutters manually operated including greasing all components for smooth opening and closing , welding and knocking the drive plate to make it on straight for smooth movement of shutter make it complete functional for operating upto the opening of upto12 Sqm complete all as specified and directed. (Note : Each shutter may be overhauled and greased every quaterly)

Overhauling of rolling shutters manually operated including greasing all components for smooth opening and closing , welding and knocking the drive plate to make it on straight for smooth movement of shutter make it complete functional for operating upto the opening of exc 12 Sqm but upto 24 sqm complete all as specified and directed. (Note : Each shutter may be overhauled and greased every quaterly)

Overhauling of rolling shutters mechanically operated including greasing all components for smooth opening and closing , welding and knocking the drive plate to make it on straight for smooth movement of shutter and make it complete functional for operating upto the opening upto 12 Sqm complete all as specified and directed. (Note : Each shutter may be overhauled and greased every quaterly)

Overhauling of rolling shutters mechanically operated including greasing all components for smooth opening and closing , welding and knocking the drive plate to make it on straight for smooth movement of shutter make it complete functional for operating upto the opening of exc 12 Sqm but upto 24 sqm complete all as specified and directed. (Note : Each shutter may be overhauled and greased every quaterly)

Replacement of old tension spring with new spring of size 450 mm for shutter not exc 12 Sqm each complete all as specified and directed by engr in charge

Replacement of old tension spring with new spring of size 450 mm for shutter exc 12 Sqm each complete all as specified and directed by engr in charge

Dismantling structural steel work including doors, gates etc.complete all as specified and directed by engr in charge

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290. Gde-E-165 and for portion framed and hung as gates, rollers for sliding on sliding MS plate including pintle hinges,/Pin type hinges stops, hand-made sliding bolts, etc. complete all as pecified and as directed. Note:- The doors will be fabricated as per the site requirement.

M&L for MS plates of Fe 410 W grade E-250) quality in (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified and directed.

M & L for preparation of new steel surface exc 10cm width or girth and applying two coat of synthetic enamel paint over a acoat of red oxide primer upto 12m height complete all as specified and directed by engr in charge

M & L for preparation of old steel surface exc 10cm width or girth and applying two coat of synthetic enamel paint upto 12m height complete all as specified and directed by engr in charge

M&L for running welding in repairs n exc 6 cm in thickness of metal to be welded. complete all as specified and directed by engr in charge

Supply of ball bearing no 6003 to 6008 of sliding hanger gates complete all as specified and directed.

Repair to MS wheel of 40 to 50 mm thick and 18 to 20 cm height including shaft and checknuts complete including hole at centre and grooves for fixing bearings complete all as specified and as directed.

Replacement of bavel gear box with crank handle to rolling shutters complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F 1.25 mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, : gear operated type with bevel gear box and crank handle complete

S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed by engr in charge

S&F Ball bearing for rolling shutters complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified

M&L Brick work with sub class 'B' brick straight or curved on plan built in cement mortar 1:4 complete and all as specified and directed by Engineer-in-Charge.

M&L for preparation of New plastered surfaces by washing, rubbing down and stopping of distempered surfaces and applying two coat of oil emulasion distemper on wall etc complete all as specified and directed.

M/S P.S CONSTRUCTION CO (BID ID -3377014)

M/S G P MARWAHA (BID ID -3378543)

Surya & Gautam Builders (BID ID -3378713)

LAKSHMI BUILDING INOVATORS (BID ID -3383457)

Vijay Kumar Contractor and Engineers (BID ID -3375831)