Special repair of Tourist Information Centre, By pass, Tutikandi, Shimla, HP.

Amount

Clearing of jungle i/c uprooting of rank vegetation, grass brush wood, trees and sapling of girth upto 30 cm measured at a height of 1 meter above ground and removal of rubbish complete including carriage of material in all lead and lift as per the direction of Engineer-in-charge.

Providing and laying in position cement concrete 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) of specified grade excluding the cost of centering and shuttering including carriage of materials up to all lead and lift as per direction of Engineer -incharge.- All work up to plinth level.

Providing and laying cement concrete 1:2:4(1 cement:2 sand :4 graded stone aggregate 40mm nominal size)and curing complete including carriage of material in all lead and lift as per the direction of Engineer-in-charge.excluding cost of form work in: Foundation and plinth.

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 g/cum.“Excess/ less cement used as per design mix is payable/recoverable separately) including carriage of materials up to all lead and lift as per direction of Engineer -incharge.

All works above plinth level upto all floor height.

Steel reinforcement of make TATA/ JINDAL/SAIL or its equivalent for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Thermo-Mechanically Treated bars of grade Fe-500D or more.

Second class brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Cement mortar 1:4 (1 cement : 4 coarse sand) in superstructure above plinth level up to floor V level in all shapes and sizes in as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

Second class half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Cement mortar 1:4 (1 cement :4 coarse sand) in superstructure above plinth level up to floor V level as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

Providing wood work in frames of false celling partitions etc. sawn and put-up in position including carriage of material in all lead and lift as per the direction of Engineer-in-charge.

Sal wood

Providing and fixing wooden plank ceiling with second class deodar wood of 12mm thick with tongued and grooved jointing and wood screws (frame work and cover fillets to be easured and paid for separately) as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 40 mm thick including ISI marked Stainless Steel butt hinges with necessary screws as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

40mm thick

Providing and fixing veneered decorative plywood lining with decorative surface on one face with butt jointing and nails (frame work and cover fillets to be measured and paid for separately) including carriage of material in all lead and lift as per the direction of Engineer-in-charge.

4 mm thick ply-3ply.

Providing ornamental eaves board 300x25 mm thick i/c fixing in position including carriage of material in all lead and lift as per the direction of Engineer-in-charge.

2nd class deodar wood

Providing and fixing plain square edged cover fillets (beading) 50mmx12mm section with wood screws in ceiling and lining including mitring at junctions including carriage of material in all lead and lift as per the direction of Engineer-in-charge.

2nd class deodar wood.

Providing and fixing bright finished brass sliding door-bolts with nuts and screws etc. complete including carriage of material in all lead and lift as per the direction of Engineer-in-charge.

Providing fixing bright finished brass tower bolts with screws etc. complete including carriage of material in all lead and lift as per the direction of Engineer-in-charge.

Providing and fixing bright finished brass handles with screws etc. complete including carriage of material in all lead and lift as per the direction of Engineer-in-charge.

Providing and fixing 50mm bright finished brass cup board or ward robe knob including carriage of material in all lead and lift as per the direction of Engineer-in-charge.

Providing and fixing bright finished hard drawn hooks and eyes including carriage of material in all lead and lift as per the direction of Engineer-in-charge.

Providing and fixing 65x35mm. special quality bright finished brass cup board locks or wardrobe locks with six levers including necessary screws etc. complete. (Indian make of approved quality) including carriage of material in all lead and lift as per the direction of Engineer-in-charge.

Supplying and fixing glass panes with putty and nails including removal of broken glass panes wherever necessary complete including carriage of material in all lead and lift as per the direction of Engineer-in-charge.

plain glass 4mm thick

Providing and fixing bison board ceiling of approved quality with butt jointing and nail (frame work and cover fillets to be paid for separately including carriage of material in all lead and lift as per the direction of Engineer-in-charge.

cement bonded particle board 6mm thick

Providing and fixing plain lining for walls/partitions/ panelling with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete (Frame work shall be paid for separately) including carriage of material in all lead and lift as per the direction of Engineer-in-charge. 12mm thick commercial ply

Providing and fixing 19mm thick Commercial Board water proof shutters for up boards i/c fixing with nickel plated piano hinges with screws etc complete) including carriage of material in all lead and lift as per the direction of Engineer-in-charge.

Providing and laying NITCO/KAJARIA or its equivalent vetrified Glazed Ceramic floor tiles of size 300x300x12 mm of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete including carriage of material in all lead and lift as per the direction of Engineer-in-charge.

Providing and fixing Ist quality wall tiles NITKO/KAJARIA or its equivalent -300x300x12mm size conforming to IS: 15622 of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including carriage of material in all lead and lift as per the direction of Engineer-in-charge.

Providing and laying vitrified floor tiles NITKO/KAJARIA or its equivalent in size 600x600x12mm with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. complete including carriage of material in all lead and lift as per the direction of Engineer-in-charge.

Kota stone slab flooring 20 mm (average) thick base of lime mortar 1:4 (1 cement: 4 sand)laid over and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including carriage of material in all lead and lift as per the direction of Engineer-in-charge.

25mm thick

Plastering with 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix including all cost and conveyance of materials and labour charges etc completete-1:4 (1 cement: 4 fine sand) for External pladtering as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge.

Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges

Providing and fixing valley 90 cm overall 0.60mm thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge

providing and fixing 15 cm wide 45cm oveall semicircular plain G.I.Sheet gutter with iron brackets 40x3 mm size bolts and nuts and washers etc. i/c making necessary connections with rain water pipe complete as per design including carriage of material in all lead and lift as per the direction of Engineer-in-charge.

0.63 mm thick sheet

Providing and fixing flushing 38cm overall with 0.60mm thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge.

Steel work TATA/Sail or its equivalent welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting including carriage of material in all lead and lift as per the direction of Engineer-in-charge.

Readymixed paint brushing wood primer pink

Painting two coats(excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping including carriage of material in all lead and lift as per the direction of Engineer-in-charge.

With enamel paint other than white

Painting one coat(excluding priming coat)on previously painted wood and wood based surfaces with enamel paint to given and even shade including cleaning of all dirt,dust and other foreign matter sand papering and stopping including carriage of material in all lead and lift as per the direction of Engineer-in-charge.

With enamel paint other than white

Extra for every subsequent coat of paint including carriage of material in all lead and lift as per the direction of Engineer-in-charge.

Varnishing one coat (excluding priming)on previoulsy varnished wood and wood based surfaces to give an even surface,including cleaning the surface of all dust and sand papering so as to produce a smooth,dry and matt surface complete including carriage of material in all lead and lift as per the direction of Engineer-in-charge.

Extra for every sub sequent coat of varnish including carriage of material in all lead and lift as per the direction of Engineer-in-charge.

Providing and appling lecquer polish on previously polished wood and wood base surfaces to give and even surface i/c cleaning the surface of all dirt, dust and sand papered smooth complete including carriage of material in all lead and lift as per the direction of Engineer-in-charge.

Wall painting(one coat)with plastic emulsion paint of approved brand and manufacture on decorated wall surface to give an even shade including thoroughly brushing the surface clean of all dirt grease,loose pieces of scale and sand papered smooth complete including carriage of material in all lead and lift as per the direction of Engineer-in-charge.

Extra for every sub sequent coat of wall painting with plastic emulsion paint of approved brand and manufacture complete including carriage of material in all lead and lift as per the direction of Engineer-in-charge.

Dismantling roofing including ridges, hips, valleys, gutters etc. stacking the serviceable materials and disposal of un-serviceable materials complete including carriage of material in all lead and lift as per the direction of Engineer-in-charge.

G.I. Sheet roofing

Dismantling wooden boardings in lining of walls and partitions including frame work and stacking the materials complete including carriage of material in all lead and lift as per the direction of Engineer-in-charge.

Thickness above 10mm and upto 25 mm

Water supply & sanitary installation :- Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

1216 (16 mm OD) pipe

1620 (20 mm OD) pipe

Providing and fixing 110 mm X 4 Kgf pvc Poly plast sewarage pipe of working pressure not less than 4.5 kg per sqcm (Four point five kilogramme per sqcm) including filling the joints with approved adhesive complete including carriage of material as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts. -- 110mm dia pipes

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts. -- 110 mm diametre

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

Coupler -- 110 mm

Single tee with door -- 110x110x110 mm

Bend 87.5° -- 110 mm bend

Shoe (Plain) -- 110 mm Shoe

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised PVC pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL-PE Composite tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank including carriage of material in all lead and lift as per the direction of Engineer-in-charge. - Sintex or equivalent.

Providing and fixing viterous china water closet Jaquar make Cat No. RS-WHT-37953BIUFSM incld. Concealed cistern cat. No. JCS- WHT-2400NS and cover plate JCP-CHR- 392415 including all fittings and accessories, or equivelent as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

Providing and fixing counter top vitreous china wash basin Jaquar make Cat No.DRS - WHT- 37601 including c.p. waste and waste pipe complete set or equivelent as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

Providing and fixing white vitreous china URS-WHT-13253N Urinal (Back Inlet) With Fixing Accessories, Size: 385x325x635 mm Jaquar make, FLV-1093NSQ, Metropole Flush Valve Regular, 40mm Size (Concealed Body) with Exposed Shut Off Provision &, 100mm Square Plate or equivalent make with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

Providing and fixing Urinal Partitions, JSE-CHR-110UC450X, H: 900 W: 450 jaquar make or equivalent including all charges for cost, carriage,and labour for fixing and making the wall good as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

Providing and fixing NIRALI make stainless steel kitchen sink of size 1040 x 545 (Opal) including cutting and making good thw walls wherever required as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

Providing and fixing 32mm dia PVC pipe for wash basin as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

Providing and fixing Click Clack Waste 32mm Size Half Thread With 80mm Height - ALD-709 including Bottle Trap 32mm Size with 250mm & 190mm Long Wall Connection Pipes & Wall Flange ALD-769L250x190 as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts. 32mm dia

Providing and fixing 125 mm stainless steel square grating of approved brand including cutting and making good the walls wherever required as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

Providing and fixing bevelled edge miror of superior glass Saint Govind/Modi guard or TATA make with C.P. set of stud and brass screws and washers as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

Providing & fixing C.P. Towel ring Jaquar make Cat No. AKP-35721P or equivalent as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

Providing and fixing Bib cock (strainght line model) with wall flenge Jaquar make Cat No. FLR-5047N or equivalent with all accessaries including cutting and making good the walls wherever required as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

Providing and fixing C.P. pillar cock with base flenge Jaquar make Cat No. KUP35001PM or equivalent as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

Providing and fixing Faucet Range FON-40053 angular stop cock with wall flange, Jaquar make or equivalent with all accessories including cutting and making good the walls wherever required as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

Providing and fixing Essco Jaquar Brass Jet Spray Nozzle (Chrome) with 1 Meter PVC Tube essco, Jaquar make or equivalent including all cost, conveyance and labour charges etc complete as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

Providing and fixing ACN-1131N, Soap Dish Holder, jaquar Make or equivalent including all cost, conveyance and labour charges etc complete as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

Providing and fixing ACN-1153S, Toilet Roll Holder with Stainless Steel, Flap jaquar make or equivalent including all cost, conveyance and labour charges etc complete as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

Providing and fixing Double Coat Hook Jaquar make Cat No. AQN-7761 or equivalent including cost, conveyance and labour charges etc complete as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

E.I Work Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable resurface / recessed PVC conduit/Casing caping , with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

GROUP "C"

Wiring for light/power plug with 2X4 sq. mm FRLS PVC insulated copper conductor sing1e core cable in surface/ recessed PVC conduit/Casing caping alongwith 1 No. 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

Wiring for light/power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit/Casing capingt alongwith 2 Nos 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit/Casing caping as required as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

4X10 sq. mm + 2X6 sq. mm earth wire

Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

1 or 2 Module (75mmX75mm)

8 Module (75mmX75mm)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess,including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc as required as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess,including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

15/16 amp switch

6 amp socket outlet

6 pin 15/16 amp socket outlet

Telephone socket outlet

Regulator

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

6 way (4 + 18), Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

Single Pole

supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required (Legrand/Schneider/L&T make or equivalent or as approved by site engineer) as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

63 Amps ’C'-curve MCB

Providing and fixing following type Wall light.FLORETTE WL 1LS E27 SS Decorative wall light, stainless steel, rust free fixture with white glass diffuser suitable for 7.5 W LED filament lamp E27 base. (Philips/Havells/Wipro)as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan with BLDC Motor, making good the damages, connections , testing and commissioning etc (Usha/Atomberg/Havells make or equivalent or as approved by site engineer) as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

Exhaust Fan, Metal Heavy duty, 300 mm sweep, Usha make TURBO HEAVY DUTY

Providing and fixing of (Mirror Light) complete with all accessories including connections, testing and commissioning as required. (Havells,Philips/Decon/Wipro) or equivalent or as approved by site incharge

LED L.Fixt Elite Pride Plus Batten 5 W 6500 K LHEXBLP7IN1W005

Surface Fixture Jaquar make Nero Surface (Round), Cat No. LNRO02R012SW, 12 Watt, Warm White Colour, Surface-mounted round panel with die cast aluminium housing complete with all accessories, connections, testing and commissioning etc. as required. (Jaquar/Philips/Wipro make or equivalent or as approved by site engineer) as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

Providing and fixing of LED Pride Essential Batten 25 W 6500 K complete with all accessories including connections, testing and commissioning as required. (Philips/Havells/Wipro) or equivalent or as approved by site incharge as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

Providing and installation of stationary storage type Electric water Geyser Racold Make by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. (Racold/Havells/Bajaj make or equivalent or as approved by site engineer) as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

30 Liter capacity water heater (Cat-A) 4 Star

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections (Legrand/Hager/Siemens make or equivalent or as approved by site engineer) as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

RJ 45 Lan Connector

Supplying, installation, testing and commissioning of A.C. CEILING FAN 48" (1200MM) Rating with DOUBLE BALL BEARING, Energy efficient including cost of petty material required to complete the job in all respect. Make : HAVELLS, CROMPTON, anchar as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts.

Santosh Jeevan (BID ID -530929)

jai prakash sharma (BID ID -531655)

Pawan Kumar Sharma (BID ID -531534)

RAJINDER SINGH VERMA (BID ID -531571)