Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.1 LAccepted-AOC 11A LAXMI VIHAR BANDHAN PALACE WALI GALI MODIPURAM MEERUT UTTAR PRADESH 250110 | MEERUT | UTTAR PRADESH | 250110 | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹27.5 L+₹75,578 (2.82%)Rejected-Finance | L2 | Rejected-Finance NOT LOWEST | |
| 3 | L3₹28.6 L+₹1.8 L (6.84%)Rejected-Finance | L3 | Rejected-Finance NOT LOWEST | |
| 4 | L4₹28.6 L+₹1.9 L (6.99%)Rejected-Finance MOCHARIM BODHGAYA GAYA 824231 | GAYA | BIHAR | 824231 | L4 | Rejected-Finance NOT LOWEST | |
| 5 | L5₹28.9 L+₹2.2 L (8.11%)Rejected-Finance WZ 484 M S BLOCK HARI NAGAR NEW DELHI 110064 | NEW DELHI | NEW DELHI | DELHI | 110064 | L5 | Rejected-Finance NOT LOWEST |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
10 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE GAYA
Garrison Engineer Gaya Paharpur Mil Stn Gaya Bihar, PIN-823005
Day to day maint and certain works for bldgs under zone A area at Mil Stn Gaya
2024_MES_661229_2
8008/GE/E8
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer Gaya Paharpur Mil Stn Gaya Bihar
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GAYA
₹50,000
Yes
19 Oct 2024
3 Sept 2024
12 Sept 2024
3 Sept 2024
10 Sept 2024
5 Sept 2024
Amount
S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18mm and fixed with beeding/Staples directed by Engg- in- charge.
Hacking out old broken glass (any the size quality or description) from wooden or steel frames glazed all as specified and directed by Engr-in-charge.
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares of any size complete all as specified and directed by Engr-in-charge.
S&F 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares n exc 0.50 Sqm each pane complete all as specified and directed.
S&F in repair double legged door stopper of aluminium alloy with rubber all as specified and directed by Engr-in-charge.
S&F in repair 15 mm dia bore bib taps, cast copper alloy chromium plated fancy type with crutch alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. (Make-SEIKO/Plumber/Parryware/Essco)
S&F in repair 15 mm dia bore pillar taps cast copper alloy, with capstan head, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed. (Make-SEIKO/Plumber/Parryware/Essco)
S&F in repair 15 mm dia stop valves/angle valves, cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe. (Make-Plumber/ Parryware/ Essco)
S&F PVC connections 15mm size with PTMT nuts of length 450 mm all as specified and as directed. Make - Prayag/Polytuff/Symet
S & F CP Jet spray complete all as specified & directed. (Make-Plumber/parryware/ Essco)
S&F brass chromium plated Shelf glass assembly with CP screws etc complete all as spd (Make-Parryware/Prayag/Jaguar)
S&F PVC connections 15mm size with Stainless Steel of length 750 mm all as specified and as directed. Prayag/Polytuff/Symet
S&F CP health faucet 15 mm with flexible tube of stainless steel provided rubber hose and wall hook etc complete as in repair all as specified. Make : Prayag
S& F PVC ( SWR ) nahani ntrap / floor trap 75 mm dia all as specified and as directed. Make - Reliance, finolex, supreme, kisan, prince
S&F in repair 15 mm dia two way angle valves, cast copper alloy,fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions (Make-SEIKO/Plumber/Parryware/Essco)
S&F in repair 15 mm dia two way bib taps, cast copper alloy,fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions (Make-SEIKO/Plumber/Parryware/Essco)
Supply & fix in repair brass chromium plated mixer for wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed by Engr-in-charge. (Make-SEIKO/Plumber/parryware/Essco)
S &F as in repair chromium plated Shower rose 15 mm size, 125mm long with arms (Make-Parryware/Prayag/Essco)
S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) (Make-Prayag/Pollytuf)
S&F PVC waste pipe size 32 mm X 800 mm flexible with coupling for Urinal etc. complete all as specified and directed.(Make-Prayag/Symet/Polytuff)
S&F in repair 100 mm/75 mm dia mild steel chromium plated grating (double Q) fixed on floor trap/nahani trap in Cement mortar 1:6, all as specified and directed by Engr-in-charge.
S&F vitreous china wash basin white flat back size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper including brackets or fixed to walls with anchor fastners all as specified and directed by Engr-in-charge. (Make:- Parryware/ Hindware /Cera)
S & F in Repairs of vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests Water closet (Squatt pattern) complete including provision of cement concrete bedding
S & F in Repair of Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, but excuding flushing cistern and flush pipe complete.
S & F of 10 litre PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets
S & F as in repair of white seat cover for pedestal pattern water closet including fixing bolts complete.
S&F in repair rotational moulded three layer polyethylene water storage tanks (cylindrical vertical with closed top) capacity 500 Ltr hoisted and fixed in position all as specified and directed by Engr-in-charge. Make;- Sintex/ Rotex/ Polycon
S&F in repair rotational three layer moulded polyethylene water storage tanks (cylinderical vertical with closed top) capacity 1000 Ltr hoisted and fixed in position all as specified and directed by Engr-in-charge. Make;- Sintex/ Rotex/ Polycon
Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.
Demolition of Re-inforced concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
M & L brickwork with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.
M&L Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
Taking down cement plaster any description on brick or stone walls or wall tiles etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
M&L for rendering 10mm thick in ceiling on brick work or concrete surfaces in CM 1:3, finished even and smooth without using extra cement all as specified and directed.
M&L for rendering 10mm thick internal surfaces on other than fair faces of brick work in cm 1:6 as directed by Engr-in-charge.
M&L for rendering 15mm thick external surfaces on brick/concrete in CM 1:4 finished even and smooth without using extra cement with WPC 2% by wt of cement. Note:-WPC measured and paid separatly
M&L for applying 1mm thick wall care putty incl preparation of newly plastered wall/ceiling surfaces
M&L for applying two coat of acrylic distemper over a coat of primer incl preparation of old/new plastered wall surfaces.
M&L for 2 coats cement base paint over a coat of primer including preparation of newly plastered wall surfaces complete
Demolition of Concrete in ground floors and pavings including floor tiles n exc 15 cm thickness (below or above ground level)
M & L for Cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate), 25 mm thick in flooring etc complete all specified and as directed
M&L for granite (any type) work (table rubbed and polished) 18 to 20 mm thick in working platform and like including cutting for sink etc. in cement mortar (1:4) including rounding of edges and pointing in white cement (1:2) using marble dust with admixture of pigment to match.complete all as specified and as directed
M & L coloured Non Skid ceramic coloured tiles (square/rectangular) area of each tile exc 0.11 Sqm but not exc. 0.18 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer with CM 1:4 complete
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
M & L for vitrified ceramic tiles double charge light shed of 10 mm thick (square/ rectangular) polished, area of each tiles n.exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 complete.
M & L coloured digital Glazed ceramic coloured tiles in vertical surfaces 450 x 300 x 7-8 mm set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 completed.
M&L for pressed steel door frame size 105 mm x 60 mm made of 1.25 mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc. complete, all as specified.
M&L for pressed steel door frame size 125 mm x 60 mm made of 1.25 mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc., complete, all as specified.
M&L two coat of syntetic enamel paint over new steel surface of any description over 10cm in width or grith not otherwise described over one coat red oxide primer including preparation of surfaces complete.
M&L two coat of synthetic enamel paint over new wooden surfaces of any description not otherwise described over 10cm in width or grith over one coat of pink primer including preparation of surfaces complete.
M&L for 30 mm thick Flush shutters, solid core construction, with block board core plywood face panels on both side, commercial type on both sides including 5 mm thick edging/beading on exposed to view on sides & top complete.
S&F MS work using angle Iron / MS plate / MS sheet for replacing purlins etc. where directed including all cutting, welding, drilling etc. where required.
M & L two coats of synthetic enamel painting on steel surfaces exc 10 cm width or girth over one coat of red oxide primer including preparation of new steel surfaces.
M & L for TMT bars 8 mm dia & over cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete
M&L RCC type B-1, 1:2:4 (using 20 mm graded stone aggregate) in slabs, cantilever or supported on walls and small works like cubes etc.
S&F Powder coated aluminium frame/shutters for windows, ventilators sliding/openable etc icluding joining cleat for fixing, locking arrangement, rubber beading, screws, etc complete all as specified. Make : JINDAL/HINDALCO/INDALCO. Note : (i) Glazing and wire mesh shall be measured and paid separetely only as the labour element included in the relavent item. (ii) Item shall be paid as per weight of aluminium section (iii) The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and such as locking arraangement etc as required, which shall not be measured for arriving the weight (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing.
S & F of powder coated aluminium alloy handles, fabricated type, anodised 100 mm long
S & F of powder coated Aluminium anodised, barrel tower bolts of powder coated and fixed 100 mm long
S & F Male Brass Threaded Adaptor (MTA/ MBTA/Female Brass Threaded adaptor (FTA/ FBTA) 20 mm dia complete all as specified.
S & F Supplying and laying of CPVC pipes 20 mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed by Engr-in-charge.
M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 110 mm bore of pipe etc complete all as specified and directed.
M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 75 mm bore of pipe etc complete all as specified and directed
S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed.
S&F PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed.
S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed
S&F PVC (SWR) vent cowl for 110 mm bore pipe
S&F PVC (SWR) multi floor trap with grating 75 mm dia including jointing with solvent cement
S&F aluminium handles, cast type, anodised of size 150mm.
S&F 100mm long aluminium anodised barrel tower bolt complete.
S&F as in repair 150mm long aluminium anodised barrel tower bolt complete.
S&F as in repair alluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 300 mm long complete all as specified.
S& F 100mm butt hinges, extruded aluminium with galvanised MS hinge pin anodised type C - 21
S&F as in repair MS Butt hinges, medium weight cold rolled of size 100 mm .
S&F as in repair MS Butt hinges, medium weight cold rolled of size 75 mm .
S&F as in repair 200 mm long aluminium anodised barrel tower bolt of extruded section
S&F in repair 300 mm MS ordinary rat tail rod pattern springs, including roller plate.
S&F in repair steel locking bolts with mild steel electrogalvanised plate and bright bolt not less than 10 mm dia, 100 mm size
Taking down chowkhats or frames not exc 1.5 Sqm ( without taking shutters from the frame).
Taking down chowkhats for frames exc 1.5 Sqm but not exc 4.00 Sqm.
Taking down of shutters exc 1 sqm and not exc 2 sqm each shutters and refixing in same opening.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing
S&F Solid PVC factory made Door shutter of 30mm (style) consisting of frame made out of MS tubes for top bottom rails MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip 20mm width stuck inside with solvent cement for stilesa and plain coloured PVC sheets for top rail, lock & bottom rail on either sides & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beeding and jointed together with solvent cement as pere specification and drawing
S & F of Grating doom 100mm dia of PTMT (Minimum weight 25gms) Make Prayag/Pollytuff
S & F of Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms)
S&F of stainless steel grade 304 of kitchen plate rack of 600x750mm complete all as specified and directed.(Make:nirali/prayag)
S&F CP towel rail/ring all as specified and directed by engr-in-charge.
S&F CP toilet paper holder all as specified and directed by eng-in-charge.
S&F CP Wall mixer (three in one) 15mm bore for bathroom all as specified and directed by engr-in-charge.
M&L PTMT 20mm,high pressure, with polythene float and flynut complete,screwed for iron pipe or brass ferule fixed.
Supply only liquid water proofing compound ISI marked.
S&F in repair Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed
Dismanteling ceiling and wall boards of any type or any thickness inclluding cover fillets compleate all as specified and directed
M&L for 35mm thick second class hardwood glazed and skelton door shutters (Three panels) open rebated and prepared to receive glass / gauge etc edges of framing plain chamfered or rounded with cut and mitred beads for securing glass/gauges etc with sash bars size of members of shutter as specified in SSR Part-I section 8, clause 8.24 (a) complete.
S&F 15 mm bore PTMT bib tab complete all as specified and directed.(make:prayag/shakti)
S&F 15 mm borePTMT bib tab Long body complete all as specified and directed.(make:prayag/shakti)
S&F 15 mm borePTMT angle valves complete all as specified and directed.(make:prayag/shakti)
S&F 20mm dia stop valves complete all as specified and directed.(make:prayag/shakti)
S&F 15 mm borePTMT Pillar tab complete all as specified and directed.(make:prayag/shakti)
S & F Century PVC boards Starke prime thickness 8 mm with decoravtive century starline laminates gloss colour wenge brew 80675 G on front of thickness 0.8-1.0mm cut to length of size and shape complete including necessary frame work for wall panelling and dismantling of existing wall panelling all as specified and directed by Engr-in-charge.
M & L for anodised aluminium snap grid frame work for false ceiling and 4 mm thick HPSC (High Pressure steam cured) pre-primed textured designer board, water resistant, be placed in the grid system duly suspended with 2 mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof complete all as specified.
Disconnecting PVC water storage tanks 1000 Ltrs capacity cleaning and removing all scale and dirt of circulating pipe including endorsing dirt of cleaning and hoisting if required and refixing in same posotion all as directed
S&F of Aluminium powder coated(1/1.2 mtr size) door cills of Any size and descripton all as specified and directed by Engg- in- Charge.
Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed
S & F sinks made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.
M/S PANCHAM RAI SONS (BID ID -3092207)
M/S VIKAS CONSTRUCTION CO. (BID ID -3092008)
MAA BHAGWATI TELECOM LINK (BID ID -3092178)
MS HARI MOHAN GUPTA (BID ID -3092252)
M/S AJAY KUMAR SINGH (BID ID -3092328)
M/S NIRBHAY KUMAR SINGH (BID ID -3092299)
BISHWNATH KUMAR BHARTI (BID ID -3092441)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .