PROVISION OF FENCING WITH CONNECTED WORKS FOR WSA LAND AT AFS NYOMA

Excavation in post holes (or similar holes) each not exc. 0.5 Cubic Metre and getting out, returning filling and ramming earth or broken rubble mixed earth around in layers not exceeding 25cm watering and removing surplus spoil to a distance not exc. 50 m and making good surface in Hard dense soil , complete all as specified and directed by Engineer-in-Charge.

M&L for Plain cement concrete (1:4:8), type D-2, using 40 mm graded mechanically crushed stone aggregates as in foundations, filling and mass concrete or in sub base to floor, complete all as specified and directed by the Engineer in Charge.

M&L for Cement concrete Type C-2 1:3:6 (40 mm graded aggregate) in foundation,filling and mass concrete for post holes complete all as specified and directed by the Engineer in Charge.

M&L for Providing, cement concrete type B0 1.2.4 (12.5 mm graded aggregate) plinth courses, string courses lacing courses,, copings, kneelers,kerbs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

S&F steel section, angle iron or core for posts or stuts in fencing and framed work nosing to steps including embeding in concrete and serewing ect. wind ties for roof including securing bolts, cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) incl all necessary drilling, bolting or reviting etc and similar works confirming to FE-290 Gde E-165 complete all as specified and directed by the Engineer in Charge.

M&L for Mild steel screw bolts 16 mm dia of shank factory (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exe. 5cm but n. exc 10 cm long , complete all as specified and as directed by the Engineer-in-Charge. Note-Length of ordinary bolts shall be measured from the underside of the head to the end of shank)

Supply and fixing mild steel galvanised chain link fencing with 50x50mm nominal pitch of wire of size dia 3.00mm to 3.5mm and weight not exceedind 4 Kg per Square Metre including line wires,any mesh, size and type of standred, rails, staining ,bolt, etc, including provision of binding wire, complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of new steel surfaces with one coat of Red oxide and two coats of synthetic enamel paint of ordinary tint on surfaces of any description over 10 cm in width or grith, not otherwise described.

S&F Galvanized 2 strand, steel barbed wire 2.24 mm dia, barbed with 2mm dia barbs at 75mm spacings, and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanized mild steel wire staples, or steel pins etc fixed as in complete all as specified (each line of wire to be measured), complete all as specified and directed by Engineer-in-Charge.

M&L for 10mm dia mid steel round bar for chain link fencing for strainght complete all as specified and directed by Engineer-in-Charge.