Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.9 LAccepted-AOC | L1 | Accepted-AOC Being lowest and Reasonable | |
| 2 | L2₹19.8 L+₹9,865 (0.50%)Rejected-AOC | L2 | Rejected-AOC Rejected | |
| 3 | L3₹24.7 L+₹5.0 L (25.4%)Rejected-AOC | L3 | Rejected-AOC Rejected | |
| 4 | L4₹24.9 L+₹5.1 L (26.1%)Rejected-AOC | L4 | Rejected-AOC Rejected | |
| 5 | L5₹24.9 L+₹5.2 L (26.3%)Rejected-AOC | L5 | Rejected-AOC Rejected |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
13 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Srinagar
Military Engineer Services Garrison Engineer (AF) Srinagar Air Force Station Srinagar-190007
REPAIR AND REPLACEMENT TO ROOFING AND ROLLING SHUTTER, ROOF TRUSSES, GATES, SHEETS SLIDING SHUTTER AND OTHER MISC WORK UNDER GE (AF) SRINAGAR
2023_MES_597764_1
GE(AF)SGR- 20 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE (AF) SRINAGAR
As per Tender Docuemnts
9 documents required · 9 mandatory
₹500
Yes
GE (AF) SRINAGAR
₹60,000
Yes
20 Jul 2023
24 May 2023
14 Jun 2023
24 May 2023
13 Jun 2023
7 Jun 2023
Amount
Demolition, Cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed by the Engineer-in-Charge.
Demolition of cement concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge
Taking down the existing rolling shutters from the existing opening and refixing the same in position after carrying out necessary repairs including oiling, greasing,easing out etc. all as specified and directed by Engr-in-Charge.
S&F in repairs hood cover with MS sheet 1mm thick, made to hexagonal square or circular contour and stiffened with angle / flat stiffeners at top and bottom edges and fixed to bracket plate as existing complete all as specified and directed by Engineer‐in‐Charge
S&F in repairs Safety lever locks mild steel with 4 levers for rolling shutters size of lock 100mm complete all as specified and directed by Engineer‐in‐Charge
S&F in repairs MS handle for rolling shutter of size 150mm complete all as specified and directed by Engineer‐in‐Charge
Supply and fixing in repair 1.25mm thick of laths of Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete; push pull or manual type
All as per Sl item No 07 here-in-before but gear operated type with bevel gear box and crank handle
Supply and fix in repair Welded steel wire fabric( weight not less than 4kg per sqm) fixed and including MS angle iron frame including takling out old wooden frame complete all as specified and as directed.
S&F in repairs fabricated lock plate of riveted construction made of mild steel sheet of not less than 3.15 mm thickness, reinforced with mild steel angle section of size 35x35x5mm size at the bottom, interlocked with bottom most lath section of curtain so as to provide contact against the cill, when closed, fitted with sliding bolts with arrangement for locking with pad locks, one handle for widths upto 2.5m, and two handles for widths of above 2.5m complete all as specified and directed by Engineer‐in‐Charge
S&F in repairs MS pipe shaft heavy duty 40mm dia complete all as specified and directed by Engineer‐in‐Charge
M&L for preparation of old or previously painted steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamal paint in camouflaging CCD pattern complete all as specified and directed by Engineer-in-Charge.
M & L in repair for Welding exc 2.5cm and n. exc 5 cm in length, thickness of metal to be welded n exc 6mm, welding of hinges, helical door spring, tower bolt clips, MS Flat in steel window for fixing wiremesh, etc complete all as specified and direcetd by Engineer-in-charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for
M & L Rolled mild steel in roof trusses (framed), trussed, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Fe 410-W (Gde E-250) quality A complete all as specified and directed by Engineer-in-Charge
M & L Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, wind Tie etc Fe 410-W (Gde E-250) quality A complete all as specified and directed by Engineer-in-Charge
M & L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings Fe- 290 (Gde E- 165) (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete
M & L in repair for MS works as in holdfast, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging holdfasts, Grills, cladding and similar small articles conforming to Fe 290 Gde E-165, complete all as specified and directed by Engineer-in-Charge
Material and labour for two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer to new steel surface including preparation of surfaces exceeding 10cm with or girth complete all as specified and as directed.
M & L for PCC 1:2:4 type B1 using 20mm graded stone aggregate for using as lintel bend, coping,fixing holdfasts, etc including necessary formwork, complete all as specified and directed by Engineer-in-Charge
Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed including removal of debris .
Material and labour for brickwork with subclass 'B' bricks straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as speciified and directed by Engr-in-Charge.
Material and labour for Brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick wall built in CM 1:4 complete all as specified and directed.
Taking down cement plaster of any description on brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.
M&L for rendering 15 mm thick on fair faces of brick wall mixing with water proofing compound as per manufacturer instruction (Water proofing compound paid for seperately)of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement
Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed.
M&L for rendering 15 mm thick on faces other than fair of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement
Material and labour for 10 mm rendering in cement mortar (1:3) to ceiling and similar work finished the surface even and smooth without using extra cement complete all as specified
Supply only intregal water proofing compound
Material and labour for two coats of cement base paint on newly plastered surfaces of wall including preparation of surfaces over one coat of primer all as specified and directed
Material and labour for two coats of white wash on newly plastered surfaces as on ceiling including preparation of surfaces all as specified and directed
.Material and labour for two coat of oil bound distemper on newly plastered surfaces of wall including preparation of surfaces over one coat of primer all as specified and directed
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engineer-in-Charge
S & F 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 fixed with L-type or J-type or cranked hook bolts in lieu of screws, complete all as specified and directed by Engineer-in-Charge.
All as per item No 34 but except Sheets Note : Old sheets obtained from item No 33 will be used.
S&F 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating, complete all as specified and as directed by Engineer-in-Charge.
M&L for Preparing new zinc (or galvanised) surfaces to receive painting, by coating with mordant solution including washing and cleaning, etc steel and iron surfaces and applying two coat of synthetic enamel paint of any description over 10cm width or girth in Camouflaging CCD pattern as approved complete all as specified and directed by Engineer-in-Charge
S & F Heavy duty Marathon Mild steel wheel, dia of wheel exc 200mm and n.exc 300mm and width of wheet exc 75mm and n.exc 100mm for Hanger door load including fixing to existing or new MS plate of existing size, complete all as specified and as directed by the Engineer-in-Charge.
Taking down and refixing of hanger door of any size for fixing of wheels etc. complete all as specified and as directed by the Engineer-in-Charge.
S & F MS fastener of 150 mm length and 10mm dia including drilling to MS plate, brick and concrete wall
Material and labour for Cement concrete Type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in sub base,post, Dwarf wall, retaining wall, foundations, filling and mass concrete including form work Complete all as specified and directed.
Material and labour for 100mm thick Cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as flooring and finishing the surface even and smooth without using extra cement complete all as specified and directed.
Demolition of Stone slabs and tiles of any description or thickness in floors aprons etc laid in cement mortar of any thicknes, complete all as specified and directed by Engineer-in-Charge
M & L for granite (of any type) work (table rubbed and polished) 20mm thick as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in cm 1:4, complete all as specified and directed by Engineer-in-Charge
M & L Providing, cement concrete Type B1 1:2:4 in roof kerbs or mud stops, rounded or chamfered on edges.
Dismantling timber scantlings 40 sq. cm and over in section, in any position in unframed work
S & F wrought Second class hard-wood in scantlings
Demolation floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises.
Material and labour for 10mm thick vitrified parking tiles heavy duty exterior grade texured finished of size300X300 mm laid over and including 15 mm thick screed bed in CM 1:4 as in parking shed , path complete all as specified and directed.
Material and labour for Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick Screed bed or bedding layer of mortar for laying floor finishes in CM 1:6
Material and labour for Double charged Digital glazed Virified Ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick Screed bed or bedding layer of mortar for laying floor finishes in CM 1:6, complete all as specified and directed by Engineer-in-Charge.
All as per Item No 51 above here-in-before but in Skirting including 10 mm thick backing coat cement mortar 1:4, complete all as specified and directed by Engineer-in-Charge.
Material and labour for Coloured Glazed ceramic tiles in vertical surface 600x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces as backing coat, complete all as specified and directed by Engineer-in-Charge.
Material and fixing in repair for 8 mm thick HDF laiminated wooden flooring any colour laid over and including 2mm thick EPE foarm sheet complete all as per manufacture instruction and 150 micron polyothene should be placed below foam to as a water barries complete all as specified and direction incuding cleaning of existing suface of floor Make - Green floormax of green ply/ action tesa or equivelent make approved by GE
Material and labour for IInd Class Hardwood wooden Moulding as in cornices, picture rails Exc 6 Sqcm but N exc 13 Sqcm and fixed with screws/nails on wall/floor complete all as specified
Material and labour in repair for Wooden Wall panelling of second class softwood 12mm thick with tongue and groove joint fixed in any position over and including wooden framework in second class softwood with plain fillets square or sectional area exc 13 Sqcm and n exc 25 Sqcm at n exc 90 cm centre to centre in both direction and including two or more coat of french polishing on all the exposed surfaces wooden panelling as in repairs including taking down existing electrical fittings and re-fixing the same, complete all as specified and as directed by Engineer-in-Charge.
Taking out old wooden boarding as in from kitchen cup boards and M&L kitchen shutters and partition of Factory made Solid PVC embossed shutter 18mm mm tkick (stiles), with 2mm thick Moulded PVC prelam colored sheet on the front of face and fixing in frame at site as per specifications withall around FRM sheet , PVC particles board 18mm thick as directed by Engr- in -charge. incl all iron mongry such as appropriate no of kobs, handles 75mm long, ball catchers, piano type hinges etc Note- Measurements will be taken as flat.
Distmantling of existing ceiling boards of any description including cover fillets complete and M&L for fixing Gl frame work for plaster of paris seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete as per design (sunken/raised) approved by user all as specified and complete all as specified and as directed by Engr- in -charge( Frame work shall be measured flat)
Material and labour for 10mm thick plaster of paris ceiling (Gypsum anhydrous) as per design approved by the user including making coves, vaults, coffer, sunk or raised ,moulding, design for fan etc fixed on metal frame work and including reinforced with G.I. Wire mesh complete all as specified and complete all as specified and as directed by Engr- in -charge. Note- the ceiling will be measured flat No extra payment will be made for design . (GI metel frame work will be paid seperately)
Dismarting the existing ceiling board of any description fixed in any position with nails and Supply and fixing in position suspended false celling system using E Grid suspended celling Grid system. The size of Grid shall be 600X600mm with GI frame work, main runner 39X24mm, cross tee 29X24mm and wall angle 22.2X22.2mm using 4mm thick High Pressure Stream cured non primered classic/designer variant E-Board ISI Marked IS No 14862-2000. Fibre cement E Board to be placed in the gird of E Grid suspended ceiling grid system duly suspended by 4mm dia GI bar hangers from the roof with butter fly clips complete all as specified and directed. Make -M/S Everest industries Ltd or equvalent make in Appx A
Supply and fixing for 25mm dia chromium plated steel drapery curtain rods including brackets, end finials(Latoo),for curtain rails fancy decorative type and fix with brass screws to walls approved quality etc complete all as specified and as directed by Engr- in -charge
Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc 1.5 Sgm each and making good of disturbed surface match the existing surface all as spcefied and directed
-ditto - but exc 1.5 Sgm but not exc 4 Sqm each
Supply and fixing aluminium powder coated frame for doors, partition,windows, ventilators with one or more rebated including necessary jointing cleats, rubber beading, aluminium powder coated snap beading, screws, aluminium powder coated Flat for fixing etc. Complete all as specified and directed by Engineer-In-Charge.( Min. thickness of powder coating 50 micron)
Supply and fixing aluminium powder coated glazed shutter(for doors) with style and top rail of section 80 x 44mm, 16 Gauge thick and bottom rails of section 112 x 44mm of 16 Gauge thick, middle rail 150 x 44mm of 16 guage thick fixed on floor spring, both side opeining without sash bars but including 5mm thick plain/tinted / heat reflecting glass pan with and necessary jointing cleats, rubber beading, anodized aluminium snap beading, screws, aluminium anodized handle, locking arrangement(mortice lock) and aluminuium anodised tower bolt 200 mm long and hydraulic floor door spring Complete all as specified.
Supply and fixing aluminium powder coated aluminium window having three track with aluminium section 92 mm X 31.75 mm (Weight bottom section 1.070 kg/m, top section 0.933 kg/m, shutter section 40 mm X 18 mm (weight of handle section 0.417 kg/m) interlock 0.547 kg/rmt mounted on bearing to slide on tracks plain anodized in approved shade including fixing of 5mm thick sun/heat reflacted glass and wire mesh, PVC track gasket, EPDM rubber gasket on glass of weather tightening along with locks, handle including sealing gap with marble surfaces with silicon sealants making it water proof in all manner Etc. Complete all as specified and directed by Engineer-In-Charge.( Min. thickness of powder coating 50 micron)
Supply and fixing aluminium powder coated window/ventilator having fixed glass with aluminium section having section 50.80 mm x 25.40 mm (weight 0.489 kg/m) glazing clear section (weight 0.109 kg/m) with plain anodized including fixing of 5mm thick sun/heat reflacted glass making frame and glass water tightening making it good etc. Complete all as specified and directed by Engineer-In-Charge.( Min. thickness of powder coating 50 micron)
Supply and fixing aluminium (extruded section body) door closer hydraulically regulated designation No 3 universal type ,suitable for door shutters of 851 to1000mm in width and of weight between 61 to 80 Kg complete all as specified and as directed..
Supply and fixing in repair for 12 mm thick clear toughened glass door (saint-gobbain or modi guard, acid work or sand blasting work on it, as per our design), with making holes / cut-outs as required, making edges clear smooth polished, fixed with stainless steel cladded aluminium profile glass door rails with necessary door assembly (pre installed hardware, removable clip on covers, end cap, and rubber gasket or proper grip) and fixed on Double action floor spring with closing force EN3, having high grade cast iron mechanism body, housed within a corrosion resistant zinc paint protected galvanised steel loose box, internal mechanism components utilizing heat treated high alloy steel & ball bearing for optimum efficiency, closer mechanism totally immersed in hydraulic fluid, "hold open" models, having the possibility of the shutter being held open at 90 degrees angle, adjustable closing speed valve,
with pivot to suit patch fittings and door shutters, having tempered full glass panel of up to 80 kg weight, and Door handle: 475 mm long X 32 mm diameter. "S" type, back to back installation, glass damage preventing gasket, grub screws finish complete in all respect Complete all as specified and directed by Engineer-In-Charge.
Supply and fixing in repair for 12 mm thick clear toughened glass for partation (saint-gobbain or modi guard, acid work or sand blasting work on it, as per our design), with making holes / cut-outs as required, making edges clear smooth polished, fixed with stainless steel cladded aluminium profile glass door rails with necessary door assembly (pre installed hardware, removable clip on covers, end cap, and rubber gasket or proper grip) , housed within a corrosion resistant zinc paint protected galvanised steel loose box, internal mechanism components utilizing heat treated high alloy steel & ball bearing for optimum efficiency, closer mechanism totally immersed in hydraulic fluid, "hold open" models, having the possibility of the shutter being held open at 90 degrees angle, adjustable closing speed valve, with pivot to suit patch fittings complete in all respect Complete all as specified and directed by Engineer-In-Charge.
Supply and fixing in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium ally sheet foundation box, main body with stainless steel cover, govering pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.
Supply and fixing in repair Stainless Steel Gates with stainless steel tubler square pipe, Squar Bar, flait etc of grade 304 fixed in Gates , stair hand rails including welding, grinding, buffing & welding to MS 50mm x 6mm hold fast and grouted, 125mm below the concrete surface and making good (SS shall be of grade 304 quality) complete all as specified and directed.
M&L for glossy finished rubber moulded machine pressed rubber moulded chequered tiles of any pattern/design of size 300mm x 300mm x 25mm thick laid over cement screed bed of 15mm thick in cement mortar 1:6 in floors paths etc, Make: Noor tiles, complete all as specified and directed by Engineer-in-charge.
M/S A.R.TANTARY
M/S ZAHOOR ENTERPRISES
M/S M B ENTERPRISES
M/S FAROOQ AND SONS
M/S LUCKY BUILDERS
HAJI ZAHOOR HUSSAIN GANIE
M/S BASHIR AND SONS
M/S Thakur & Sons
M/S GHULAM HASSAN AND SONS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .