REPAIR/ MAINT OF LIGHTING ARRESTER IN SUPPLY DEPOT, FIRE FIGHTING SYSTEM FOR AMMUNITION AND AUDITORIUM FOUNTAIN/SPRINKLER AND OTHER MISC WORK AT ITARANA CANTT ALWAR

Amount

Excavation of trenches in any type of soil n.exc 1.5 M wide and n.exc 1.5 M in depth for pipe lines and getting out in soft/loose soil forming bottom surfaces to required gradients complete all as specified and as directed.

Returning, filling in and including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick complete all as specified and directed

Removing excavated surplus materials to a distance not exceeding 50 Mtrs and deposited where directed at a level not exceeding 1.5 Mtr above starting point complete all as specified and directed.

Taking out the unseviseable MS pipe lines including all fittings with spigot and socket ends and lead joints including burning out joints and recovering lead and cleaning the pipes internal/external for reuse 100 mm dia bore of pipes.

Refixing and laying only cast iron pipe with spigot end socketed any class in available length complete in trenches all as specified and directed for 100 mm dia bore of pipe.

Supply, laying in trenches, under floor, under road, borewell connecting, jointing and testing ERW MS casing pipe 5.4 mm thickness(minimum) including MS well cap complete for 100 mm dia bore size. Note :- (i) Excavation and earth work will be measured and paid separately.

M&L construction of brick masonry vavle pit of internal dimension 90cmx90cmx90cm depth with sub class "B' bricks in cm (1:4) and 10 mm thick plastering in CM(1:4),PCC (1:4:8) type D2 (Using 40mm grade broken stone aggregate) as in foundation lean concrete PCC (1:3:6) type CI (Using 20mm grade broken stone aggregate ) as in bedding and copping MS frame with 40x40x6mm angle iron 3 mm thick MS sheet cover plate with locking arrangement, hinges and two coats of sythetic enamel paint over one coat of red oxide primer including preparation of surface three coats of white wash on plaster surface (exposed to view) including necessary excavation in soft loose soil returning filling in and removal of surplus soil to a distance not exceeding 50mm including demolition of existing valve pit chamber completeall as specified and directed.

Supply & fixing in repair cast iron body sluice valve heavy duty class ‘PN-1.6’ of 80 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, complete with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, complete, all as specified & directed including dismantling & taking out old unserviceable sluice valve. Make-Kirloskar/Kartar/Zoloto/BIR

Supply & fixing in repair cast iron body sluice valve heavy duty class ‘PN-1.6’ of 50 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, complete with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, complete, all as specified & directed including dismantling & taking out old unserviceable sluice valve. Make-Kirloskar/Kartar/Zoloto/BIR

Supply & fixing in repair cast iron body sluice valve heavy duty class ‘PN-1.6’ of 100 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, complete with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, complete, all as specified & directed including dismantling & taking out old unserviceable sluice valve. Make-Kirloskar/Kartar/Zoloto/BIR

Supply & fixing in repair cast iron body sluice valve heavy duty class ‘PN-1.6’ of 150 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, complete with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, complete, all as specified & directed including dismantling & taking out old unserviceable sluice valve. Make-Kirloskar/Kartar/Zoloto/BIR

Supply and fixing non return valve of size 80mm bore, cast iron body, as per IS 5312 (ISI marked), heavy duty, both ends flanged and drilled, including nuts, bolts, washer and neoprene rubber gasket joint complete all as specified and as directed including dismantling & taking out old unserviceable non return valve.

Supply and fixing non return valve of size 100mm bore, cast iron body, as per IS 5312 (ISI marked), heavy duty, both ends flanged and drilled, including nuts, bolts, washer and neoprene rubber gasket joint complete all as specified and as directed including dismantling & taking out old unserviceable non return valve.

Taking down old Unserviceable air termination rod of any size and capacity complete all as specified and as directed by Engineer-in-Charge.

M&L single pointed air termination aluminium rod 12 mm dia and 300 mm long complete all as specified and as directed by Engineer-in-Charge.

Taking down old Unserviceable aluminium strip from roof and wall of ESHs any size and position including making good to disrurbed surface of wall and roof complete all as specified and as directed by Engineer-in-Charge.

Refixing of serviceable aluminum strip complete as obtain from above item 7 with on saddle / insulators, including straightning and fixing screws/accessories for roof and down conductor complete all as specified and directed by Engr-in-Charge. Note: 1.Fixing of serviceable insulators will be deemed to be included with quotade rate. 2.New insulators will be measured and paid separetly

S&F aluminium srip of size 32X6 mm complete with saddle and fixing with screw/accessories for roof and down conductor complete all as specified and as directed by Engineer-in-Charge.

Taking down old Unserviceable rusted GI strip from roof or wall any size and position including making good to disrurbed surface of wall and roof complete all as specified and as directed by Engineer-in-Charge.

S&F copper Strip 32x6mm fixed on wall or buried in ground or any other indicated situation complete all as specified and as directed by Engineer-in-Charge.

Taking down old Unserviceable GI rusted pipe from roof or wall any size and position including making good to disrurbed surface of wall and roof complete all as specified and as directed by Engineer-in-Charge.

S&F GI pipe medium grade 50 mm dia for protection of GI strip complete all as specified and as directed by Engineer-in-Charge. ( For ACSR conductor pole)

M&L for Test point with Junction box of polycarbonate body with minimum rating IP 65 of size not less than 130mmx170mmx80mm complete including made of aluminium bronze size 75x75x32mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw fixed with earth strips including nut bolt with washer on both side inside the junction box and junction box shall be fixed on wall/ pole with suitable clamp including accessories complete all as specified and directed. Make of Junction box - Naptune Cat No 1005 / equivalent in Hansel/ Spelsberg including dismantling of old unservieable MS test point box complete.

M & L for cutting of bitumanous road or PCC upto 30cm deep and 20cm wide for laying of pipe lines for protection of GI strip and making good surface by PCC 1:2:4 type B-1,20mm grade complete all as specified and as directed by Engineer-in-Charge.

M&L of PCC 1:2:4 type B-1, 20 mm graded aggregate filling and mass concrete, for road finishing, PCC blocks, earthing pit cover, and foundation concrete complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairdecorative ultra slim,elegant and sleek designed LED T5 batten lighting fixture with extruded aluminium housing with frosted diffuser envirenmentel friendly energy efficient sutiable for 20 watt LED tube light with 125 lumen per watt complete all as specified and directed .

Taking down old U/S hydrant valve and Supply & fixing landing valve hydrant type A confirming to IS 5290 with 63 mm dia gun metal instantanous type single headed outlet complete with all accessories for connecting hose pipe complete all as specified and directed.

Supply and fixing in replacement of weather proof standard fire hose box made of 18 gauge MS Sheet 800mm X 600mm X 250mm with double door with 4 mm thick glasses and door frame made of 16 gauge MS sheet painted fire red out side and brilliant white inside yard complete all as specified and directed

Material & labour of CP hose cotton breaded of size 15 mtr long of dia 63mm including couplings at both ends to fix at one to hydrant valve 63 mm and other end fix in nozzle complete all as specified and directed

Material & labour of Branch pipe gun metal 63 mm instantaneous inlet, made threaded outlet, 15mm bore nozzle long complete all as specified and directed

S&F in repairs fully automatic star Delta starters in sheet metal enclouser suitable for 15 HP capacity, 415V, 50Hz, Complete all as specified and directed. Make : L&T/BCH/Siemens

M& L for carying out servicing of diesel engine driven split case multi stage pump of capacity 92 to 100 kw installed at fire fighting location complete all as specified and directed. (a) replacement of oil filter element -01 set (b) replacement of fuel filter element -01 set (c) replacement of air filter element -01 set (d) replacement of complete v-belt(set of three) as per sample -01 set (e) replacement of complete rubber hose connecter of turbo charger line-01 set (f) replacement of fuel pipe as per sample set of 06 nos-01 set (g) replacement of oil pipe as per sample set of 06 nos-01 set (h) replacement of oil complete -01 job (j) replacement of coolent complete -01 job (k) servicing of self starter and charging alternater including replacement of worm out bushes ,bearing & carbon bushes (l) cleaning of fuel tank and complete painting

supply and fix of ^lithium based Energy Efficient Integrated solar street light of 40 watt ^ in single aluminium extruded body with duly polyurethane coating,encases with monocrystalline solar PV panel of 60 Wp ,lithium battery 11.1/12.8 v 30 AH with inbuilt BMS IP 65 high brightness W-LED (150 lm /watt) lamp with aluminium reflector for better light distrubtion CRI>70 colour temperature 5700-6500K . microcontroller basedcharge controller cum driver automatic diming function PIR motion sensor with diffirential dimming function dusk to dawn operation sutiable to working temperature -10 to 55 C .weight not more than 14-16 kg with adjustiable MS clamp sutiable for pole wall mounting etc complete as requirer protection-short circuit overload reverse polarity and battery protection firm should provide vital parameter test report from NABL accredited lab and should be made in india with CE and ROHS complaint including dismentling of old UNSV light and including bracket of 40 mm dia medium grade all as specified and directed by engineer-in-charge make-crompton ,havells and bajaj

Design Fabricating supply and errecting connecting and testing totally enclosed LT cubicle panel board 3 Phase 4 wire system outdoor type front and back opening type, ,separate compartment for each control gear,cable alley, provision of knock out type plates for various sizes of cable in and out , incoming and out going feeders duly marked on revited plates etc complete CPRI approved factory made fabricated out of 3.15 mm thick CRCA sheet duly treated through 7 tank pre treatment process and painted with epoxy powder coated mat finish of SIEMENS GREY structural RAL 7032 shade colour,built in industrial type locking arrangement on front and back ,and pre wired with PVC insulated multi stranded copper conductor for controls and monitors, PVC sleeved copper strip BusBar for connecting MCCBs ,Panel mounted on Anle iron frame of 50x50x6mm thick duly painted and embeded in PCC 1:3:6 45 CM below ground level and 15 Cm above ground level and consisting the folowing:- (a) Incoming :- (i)MCCB 4 pole TPN, 200Amps , 36KA breaking capacity, 415V,adjustable thermal & fixed magnetic setting, Make Havells/L&T/ABB - 01Nos. (ii) copper Bus bar chamber 4 pole 300 Amp- 1set (iii) Digital Amp meter 0-250Amp with CT- 1set (iv Digital volt meter 0-500 V -1nos (b) Outgoing (i) MCCB 4pole 100Amps capacity, 36KA - 02 No . (ii) MCCB 4pole 63Amps capacity, 36KA - 01 No. Note: space of out going MCCB 1 Nos to be provide and panel mounted on 2' height pcc platform

Supply, laying XLPE insulated PVC FRLS, screened , PVC bedded and PVC tape sheathed galvanised steel strip or wire armoured electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 4 core 25 Sq mm including taking out old un-serviceable cable complete all as specified and directed.

All as per item srl No 35.00 but for Cable size 3.5 core 50 Sq mm

Supply & laying sub class B bricks, locally available un-burnt bricks suitable for LT cable protection cover all as specified and as directed by Engineer-in-Charge

M &L tibba sand for bedding ang sand cushioning of all LT UG cable all as specified and directed by Engr-in-Charge

Material and labour for renewal of Earthing complete with GI earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit should not less than 4 mtr deep below normal ground level ) with top edge of the plate not less than 2.95 mtr deep below normal ground connected to and included GI earth strip 32mmx 6mm by means of bolts nuts check nuts and washer returning and filling the pits with excaviated vsoil mixing with charcoal 100 kg, crystal salt 100 kg ,magnisiun sulphate of 50 kg and vegitable soil all around the plate up to 350 mm above from top edge of plate and balence portion filling with excaviated soil in layers not exc 25 mm thick 25 mm bore galvanised iron medium grade watering pipe up to top of plate 50mm bore galvanised iron light grade pipe for earth strip protection including all excavation earth work in any type of soil pcc 1;3;6 type c1 ....for chamber of internal size 300mmx 300mmx300mm with 120mm thick wall and 700mmx700mmx150mm thick bed concreat RCC 1:2:4 ,type b1 for precast chamber cover 50mm thick reinforced with welded steel wire fabric orxPM jali (weight not less than 4.00 kg/sqmm) ,funnel,with wire mesh complete all as specied and directed. Note (i) Quoted rate shall be deemed to include for earth strip with protection pipe up to 7.5 M length

Supply and fix in replacement of GI pipe medium grade 50 mm dia in round shape for fountain(cost including moulding fabricatrion labour and other work as required for round shape pipe) including dismentlingh of existing pipe and making good the distrub surface by plaster putti paint and brick and tiles work as required on site complete all as specified and directed by engineer-in-charge

Supply and fix in replacement of nozzle fountain light 24v 12 watt ip68 SS304 steel under water fountain light RGB WS1268 complete all as specified and directed by engineer-in-charge

Supply,connect,fix in replacement submersible cables copper conductor PVC insulated over all sheathed flat flexible, ISI marked - Conforming to IS 694,1100 volts grade complete of size 10 sqmm 3 core.

Supply and fix in replacement of big nozzle brass 88 coating 15mm dia colpete all as specified and directed

Supply and fix in replacement of small nozzle brass 88 coating 15mm dia colpete all as specified and directed

Supply and fix in replacement controller box for fountain light of sutiable capacity as required on site and as directed by engineer-in-charge

Supply and fix in replacement of steel conduit pipe 25 mm medium grade for ducting of submerssible cable complete all as specified and directed

Supply and fix in replacement pvc pipe of 90mm dia 6kg/cm2 with fitting complete alll as specified and directed

Supply and fix in replacement pvc pipe of 63mm dia 6kg/cm2 with fitting complete alll as specified and directed

Supply and fix in replacement PVC controll valve of size 63 mm HD complete all as specified and directed

Supply and fix solvent for pipe line all as specified and directed

Supply and fix swing joint assembly 25mm all as specified and directed

Supply and fix reducer 90x63 PVC all as specified and directed

Supply and fix in replacement popup hunter 25mm all as specified And directed by engineer-in-charge

Supply and fix in replacement PVC Tee of size 90mm all as specified and directed

Supply and fix in replacement PVC elbow of size 90mm all as specified and directed

Supply and fix in replacement PVC Tee of size 63mm all as specified and directed

Supply and fix in replacement PVC elbow of size 63mm all as specified and directed

Supply and fix in replacement PVC end cap of size 63mm all as specified and directed

Boring holes under road pavement by bocky manually, in any type of soil upto 200 mm bore Complete all as specified and as directed.

Supply and fix in repair hose reel drum 30 m long complete all as specified and directed

M&L for carried out checking of control panel wiring of firefighting sytem with all controls inluding replacement of all pressure switches (03 Nos) and wiring as per existing design etc for controlling of pressure of pipe line by jockey pump, electric/ diesal operated fire fighting pumps etc complete The following will carried out are as under : a) The jockey pump start when pressure gone to maintain below 2.50 Kg/Cm2 in line. b) When pressure below 2.50 Kg/Cm2 than the centrifugal pump start to maintain the pressure in pipe line. c) If the electric supply is not avail the command goes to Diesel engine pump to maintain required pressure in pipe line. d) Replace the pressure switchs as per existing model - 03 Nos e) replace all internal wiring with 4 Sqmm as required length/ core with required copper lugs, etc f) repalce the contractor 6 as per existing model - 02 Nos

M & L for disconnecting and removing the defective centrifugal pump of 52.54 KW capacity of any make from the installed position by putting dummy plate to suction and delivery line,opening the pump, including copper rewinding renewal the worn out parts, and dismantling of impeller and metal filling on pitted cavity and balancing the impeller,plolishing the shaft, distance piece,replacing shaft sleeves,wear rings,bearing, check nut & studs,gland resizing, key way, key, lantern ring, bearing housing and balancing the shaft assembly,assembling the pump with new gasket & gland packing and greasing complete all as directed.

Rewinding of 1HP motor complete with appropriate guage of supper enamelled copper wire as per existing guage and turns with insulating materials of best quality including varnishing (insulation) ovening and all as directed.

Rewinding of 1.5HP motor complete with appropriate guage of supper enamelled copper wire as per existing guage and turns with insulating materials of best quality including varnishing (insulation) ovening and all as directed.

Rewinding of 5/7.5HP motor complete with appropriate guage of supper enamelled copper wire as per existing guage and turns with insulating materials of best quality including varnishing (insulation) ovening and all as directed.

Rewinding of 15HP motor complete with appropriate guage of supper enamelled copper wire as per existing guage and turns with insulating materials of best quality including varnishing (insulation) ovening and all as directed.

Complete testing of fire fighting system complete including checking of wiring of panel,serviciablity of motor,connection of pipe ,priming system,servicibility of foot valve/NRV ,checking all the valve and connection of motor and panel ,checking of hydrant and hose reel including supply and fix priming system for motor incl all fitting ,valve and pipe as required from tank to motor .Note-testing of fire fighting system should be done by a highly skilled person from a Authorised company of fire fighting system including all T&P

Supply & Fixing in repairs CI foot valve size 100 mm by taking out from sump well approximate 3 mtr deep complete all as directed. Make- KIRLOSKAR / L&T / KSB/ UPADHYAYA / VENUS / AUDCO / KEJRIWAL. Note - Cost of Necessary nut bolts and rubber sheet if required shall be included in the quoting rate of this item.

Supply & Fixing in repairs CI foot valve size 150 mm by taking out from sump well approximate 3 mtr deep complete all as directed. Make- KIRLOSKAR / L&T / KSB/ UPADHYAYA / VENUS / AUDCO / KEJRIWAL. Note - Cost of Necessary nut bolts and rubber sheet if required shall be included in the quoting rate of this item.

Supply & Fixing in repairs CI butter fly valve of size 100 mm dia including necessary nut bolts and rubber sheet complete all as directed. Make:- LEADER / KIRLOSKAR / UPADHYA / L&T / ZOLOTO / NORMEX VALVES PVT LTD, PUNE.

Supply & Fixing in repairs CI butter fly valve of size 150 mm dia including necessary nut bolts and rubber sheet complete all as directed. Make:- LEADER / KIRLOSKAR / UPADHYA / L&T / ZOLOTO / NORMEX VALVES PVT LTD, PUNE.

Supply & Fixing in repairs CI butter fly valve of size 200 mm dia or above as requiredincluding necessary nut bolts and rubber sheet complete all as directed. Make:- LEADER / KIRLOSKAR / UPADHYA / L&T / ZOLOTO / NORMEX VALVES PVT LTD, PUNE.

Supply install testing and commissioning of submersible pump set of 15 HP Capicity ,coupled with submersible motor complete with copper winding with sutiable delivery , head more than 60mtr discharge 1000LPM including mounting accessories ,GI clamp ,channels ,rubber gasket hanging rope made up of SWR or nylon water proof rope of sutiable dia etc and fabrication in any bore well including taking down old UNSV pump and deposited in E/M store yard all as specified and directed by engineer-in-charge Make- Kirloshkar/KSB/CG NOTE- Contractor shall test run the pump set by deputing sutiable tecnician from OEM in front of engineer-in-charge till achiving satisfactory result

Supply and fixing in repair of GI water tubing IS-1239 marked, medium grade, in replacement including all necessary pipe fittings laid in trenches, on wall, under floor, under road on same or new route and making good the disturbed portion as existing and including taking down of old unserviciable pipe of 15mm bore size. Note :-excavation earth work will be measured and paid saperatly.

All as per srl item No 74.00 but for 20mm bore

All as per srl item No 74.00 but for 40mm bore

All as per srl item No 74.00 but for 80mm bore

Repair/ maint/servicing of PLC panel for water supply installation including replacement of complete wiring, relay, contactor etc all as specified and directed

Supply and fix in replacement of PLC (Programmable Logic Controller) complete all as specified and directed. Make : ABB / Schneider / Siemens / Phoenix Contact

Supply and fix in replacement of Electric Actuator of size 80mm dia. Motorized Butterfly valve (20 Kg/N to 30 Kg/N) complete all as specified and as directed. Make Cat No. UNIVERSAL (U-80/100/150/16/220VAC) or equivalent in ROTORK, EMERSON

Supply and fix in replacement single phase, Motorized Ball valve suitable for 25mm GI pipe for priming of pump including suitable bypass with necessary GI fitting like gate valve, barrel piece, double nipple, elbows/bends etc with following specification : a) Size:- 25mm b) Designed Line Pressure : 4 kg/sqcm (c) Body Material:- Stainless Steel / Brass (d) Coil Power:- 6W Make : Samson SED / Asco / Rotex/ Universal Switch Gear Control

Supply and fix in replacement of Ultrasonic Level Transmitter at Sump and overhead tank for measurement of level with following specification:- Range : 0-6 meters Accuracy : 0.5 % minimum Supply Voltage : 24V DC Output : 4-20 mA , 0-10V DC Make: Pepperl+ Fuchs / Nivelco / Siemens/Banner

Material and labour for upgradation of software for scada system for water supply installation complete all as specified and directed

Labour only for testing of scada system including all software, PLC panel,antena, all type of cable ,all kind of valve etc for smooth functioning of water supply installation complete all as specified and directed including visit of skilled person in each and every water supply installation from authorised company complete .

Supply and fix antenna for scada system for water supply installation as of existing capacity complete all as specified and as directed by engineer-in-charge. Note for ser item no 77 to 85 contractor are advised to visit site before quotating rate for SCADA items.

Supply and fix in replacement impeller complete set of centrifugal pump of capacity 52.5 KW complete all as specified and directed

Supply and fix in replacement of mechanical seal complete set of centrifugal pump of capacity 52.5 KW all as specified and directed

Supply, laying, connecting and testing in repair iron (DI) pipe, 100mm bore, with spigot and socket ends, conforming to IS : 8329/2000 classification, medium grade (K7 class), with screwed and socketed joints, suitable for push-on-joint (Rubber gasket-D jointing) including all kind of fittimgs with cement motor lining inside the pipes and outside zinc coating with bituminous finish coat as per IA 8329/2000 including EPDM rubber joints conforming IS : 5382 of 1985, laid in trenches or laid in floor, including taking down and making good the disturbed surface complete all as specified and as directed. Note : Taking out, excavation & earthwork shall be measured & paid for separately under respective item.

DEMROT ELECTRICAL WORKS (BID ID -3466378)

M/s ASK Enterprises (BID ID -3471892)

Hitesh Construction (BID ID -3470465)

M/S SURJIT CONSTRUCTION COMPANY (BID ID -3467140)

PD GUPTA AND COMPANY (BID ID -3471436)