Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
Tender Value
₹5.9 L
EMD Value
₹11,740
Closing Date
11 Jan 2023, 5:00 pmClosed
CHIEF EXECUTIVE OFFICER
O/O CEO, CANTONMENT BOARD JUTOGH, TEHSIL AND DISTT. SHIMLA HP-171008
Construction of Pump Room and fencing of site at Sy. No. 15 (Naltu Spring) Jutogh Cantt.
2022_DGDE_570536_1
CBJ/110/item rate tender/Pump room/1084
Open Tender
Civil Works
Works
365 days
CANTONMENT BOARD JUTOGH
AS PER TENDER DOCUMENT
2 documents required · 2 mandatory
₹500
CEO, JUTOGH CANTT.
₹11,740
17 Jan 2023
21 Dec 2022
13 Jan 2023
22 Dec 2022
11 Jan 2023
22 Dec 2022
Amount
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm.
Providing cement concrete Type 1:2:4 with 20 mm graded aggregates in Foundations, including rafts,footings, foundation beams;plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete.
Providing Joist, channel, angle, or tee sections,fixed independently, without connecting plates, etc. in MS structure Frame, trusses etc.
Providing Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars,dovetailed or welded.
S/F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
S/F one light point or one fan point controlled by one switch with cables 1.5 sq.mm size.
S/F one 3 pin socket outlet, 5Amps on the same board with other switches, with cables 1.5 sq. mm size.
S/F one 3 pin socket outlet, 15 Amps, independent, with cables 4 sq. mm size.
S/FModular switch 1 way 6A, 1module.
S/FModular switch 1 way 16A, 1module.
S/F Socket, 6A - 2/3 pin combined 2 module.
S/F Socket, 6A/16A - 2/3 pin combined 2 module.
S/F Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings.
S/F Ceiling rose, 3 phase/PVC/polycarbonate, isolated body.
S/F Rigid non-metallic 25 mm dia PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks.
S/F PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep.
S/F PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size175 x 100 x 50 mm deep
S/F DB Triple pole and neutral 4 way.
S/F DB Four pole, 300mA
S/F Isolator Four pole 240V 63A
S/F Isolator Four pole 415V 63A
S/FTriple pole MCB and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB
S/F Fluorescent tube light fitting decorative strip type (patty type)1x28 wT5, 230v, , with electronic ballasts, bipin holder, connector block, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.
S/F Earthing complete with copper plate 60×60cm.× 3.15 mm thick electrode, and 20mm X 3mm copper strip as earthing lead buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out
S/F MS angle,channels or its equivalents Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165
Providing Cement concrete in foundations, filling and mass concrete using 1:2:4 with 20 mm graded aggregates.
S/F Chain link MS galvanisd fencing, 3mm thick wire.
S/F only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.
Providing Steel door in fencing including projecting type hinges, steel handle, complete,with glazing bars, dovetailed or welded
Paint work on surfaces of any description, over 10cm in width or girth,not otherwise described
Providing Cast iron pipes with flanged ends/ verticaliy cast, Class B, in any length, laid in trenches
Rajender Kumar
Jang Bhadur Mahato
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .