Loading…
Loading…
Tender Value
₹24.5 L
EMD Value
₹50,000
Closing Date
22 Sept 2026, 4:00 pm
Rural Development and Panchayat Raj Department
SHRIDEVI SHINTRE
BUILDING
RDPR/2026-27/BD/WORK_INDENT28867
RDPR/2026-27/BD/WORK_INDENT28867
Open
Buildings
Electronic Documents, First(One Cover)
RDPR Division Office Chikkodi
4 documents required · 4 mandatory
₹620
₹50,000
5 Sept 2026
5 Sept 2026
21 Sept 2026
Construction of Labortry building for Higher Primary and upgraded RMSA Secondry School at JODAKURLI Taluka Chikodi. (Dise Code 29300505001)
Earth work excavation by manual means for drains,canals, waste weir draft,approach channels, key trench, foundation of Bridges and such similar works,as per drawing and technical specifications, inclu...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand :12 graded stone aggregate 20 mm nominal size) upt...
Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggre...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
The cost of steel reinforcement & formwork to be paid separately) Centering / Scaffolding (Add 70% on Rate) RCC Columns / Shaft (Slip Centering)
The cost of steel reinforcement & formwork to be paid separately) Centering / Scaffolding (Add 60% on Rate) RCC Beams, Lintels
The cost of steel reinforcement & formwork to be paid separately) Centering / Scaffolding (Add 50% on Rate) Slab
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) i...
Providing lath plaster with cement mortar 1:3 5cms thick with 6mm dia steel bars at 20 cms. C to c both horizontal and vertically fixing chicken mesh for drop chajja facia backing to cup boards inclu...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying...
Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corne...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. ats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to opening...
Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elasto...
Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing...
Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & ma...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...
Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give...
Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mi...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
provifing and fixing chorinated poly venyl chloride (CPVC) Pipes confirming to ISI 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings in...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
provifing and fixing chorinated poly venyl chloride (CPVC) Pipes confirming to ISI 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings in...
Providing and installing Chalk Board 1.2*2.4 mt
Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matt...
Open Conduit System : supplying heavy gauge PVC Conduit Pipe 40 dia 2 mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system
Supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood, after due groove cutting, Finishing with necessary cement plastering complete.
Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, screws at an interval of 300mm …. etc. as required.
Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring us...
Supplying and mounting 2 nos. of 2 way 6 amps flush type switches either surface/flush mounted on existing gang box or in 4mm thick plastic sheet and mounted on a flush mounted wooden box and wiring a...
Supplying and fixing PVC/Metel Conduit Deep Junction box
Supplying capacitor type ceiling fan complete with down rod blades, shackle,canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS3741979 and with double ball b...
LED Down light Supply of recess mounted rolling type LED Down light 5x1 with 4/6W GU 10 LED Lamp Rib Fabricated from Die cast aluminum with white powder coated prewired to mains connector with suitabl...
Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...
Office Table : Of size 4'x2.5'. Made out of 12/18 mm MDF one key board and 3 drawers on the right side . Table to be covered with 1mm laminate wherever visible. Hardware of the drawer should be telesc...
Office almirah 2 door file cabinet (size 6' height3' width 1.5' Deep, gray paint coated, 5 shelves with designed for maximum space utilization to organize stuff systematically made of 22 gauge steel. ...
Peacock Chair : (Standard company) Seat, and Back half cushion with Cloth or Rexin . (KSFIC.TF-SR P.No. 07 I.No. 078)
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
kw-2 NEW General works FINAL.docx
Tender Document • 0.12 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .