REPAIR/MAINT TO COMPOUND WALL, FENCING, DRAIN, PATH, HARD STANDING, CLEANING OF SEPTIC TANK, SOAKAGE WELL, MAN HOLES AND SEWAGE LINE, FALSE CEILING, ROOFING,ALUMINIUM DOOR/WINDOW INCLUDING FITTING IN ZONE C AND D UNDER AGE (I) AYODHYA CANTT.

Amount

Taking down cement plaster from brick walls including raking out joints, hacking for key, scrubbing down with water to receive plaster removal of rubbish off the premises etc complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of brick work or concrete surface in CM 1:6 to be finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L for 15 mm thick rendering on other than fair faces of brick work or concrete surface in cm 1:6 to be finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparing old decorated surfaces of walls and applying one coats of cement base paint complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar complete all as specified and as directed.

M&L for preparation of newly steel surface of any description over 10cm width or girth, not otherwise described applying two coats of synthetic enamel paint over a coat of red oxide primer over complete all as specified and directed.

M&L for brick work with Fly ash bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed.

All as per item No. 10.00 above but except brick.

Dismantling posts or struts (wood, steel or RCC) posts embedded natural ground etc any section including taking out embedded portion and making good to distrubed ground complete all as specified and directed.

M&L for excavation in post holes each n.exc 0.50 Cum and getting out in soft/loose soil including returning, filling in and ramming earth etc and removing surplus soil to a distance n exc 50 M and making good surface complete all as specified and directed.

M&L for PCC 1:3:6 Type C2 (40 mm graded aggregate) as in foundation and mass concrete complete all as specified and directed.

M&L PCC 1:3:6 Type C1 ( 20 mm graded aggregate) in lintel upto 1.5m clear span,cill, steps,seismic and other similiar bands, plinth courses,string courses, laacing courses parapets and railings upto 60 cm in height, bed plates, copings, kerbs, etc. water troughs and the like includind weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

S&F hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

Supply only chain link MS galvanised fencing any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh size and type to any type of standards including provission of binding wire complete all as specified and directed.

S&F mild steel screw bolts 5 to 10mm diameter of shank screw bolts (machine made) with hexagonal screw heads at one end & screwed the other or screwed both ends, each screwed endsto be fitted with washers & one hexagonal or square nuts, small end exe 5cm long complete all as specified and directed.

S&F galvanized 2 brand sheet barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straning and fixing to any type of standard rails strasing bolts including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and directed.

S&F round steel bars 6 to 8mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia complete all as specified and directed.

M&L for providing precast cement concrete 1:2:4 Type B1 ( 20 mm graded aggregate) set in cement mortar 1:6 in window or door cills, lintels, steps coping, kneelers, pier caps, columns, post etc. and setting in mortar complete with joints to match complete all as specified and directed.

S&F TMT steel bars 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia or securing with clips complete all as specified and directed.

S&F TMT steel bars 6 to 8 mm dia, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia or with securing clips complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for machine pressed precast coloured concrete interlocking paver block any shape and size of 60mm thickness, M-35 Grade conforming to IS-15658-2006 with grey cement and pigment complete all specified and directed.

M&L for sand filling under floors, sand cushion or in foundations including watering and consolidation complete all as specified and directed.

M&L for screed bed or bedding layer 15 mm thick in cement mortar 1:6 on floors for laying floor finish complete all as specified and directed.

M&L for chequered cement concrete tiles set, joined and pointed in neat cement slurry in floors with grey cement and with grey cement and pigment complete all as specified and directed.

Dismantling floor, hearth or wall tiling including CM bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface such as ext wall cladding etc 350x250x 7 mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with the shade of tiles and including 10mm thick rendering in CM 1:3 to receive wall tiles complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 Type C2 (40 mm graded aggregate) as in floors/Pavings/sub base etc complete all as specified and directed.

M&F for cement concrete 1:3:6 type C-2 (40 mm graded aggt ) as in surface channel and drains complete all as specified and directed.

M&L for 100 mm thick PCC 1:2:4 Type B2 ( 40 mm graded aggregate) as in floors/Pavings etc and finish the surface without using extra cement and joint filled with bitumen and sand in 1:3 complete all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) posts embedded Cement concrete etc any section including taking out embedded portion and making good to distrubed ground complete all as specified and directed.

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 m depth for foundation, manholes, sewer line etc., and getting out in soft/ loose soil complete all as specified and directed.

All as per item No. 38.00 above, but exc 1.5 mtr but n exc 3.0 mtr in depth.

Demolition of breaking up drain pipes (SGSW, AC or reinforced concrete) set in cement mortar incl breaking and removal of bedding and hunching complete of following bore pipes.

150 mm internal dia of pipe.

200 mm internal dia of pipe.

M&L for concrete bed to drain pipes 150mm in PCC 1:3:6 type C-2 using 40 mm graded stone aggt incl packing under and haunching against sides of pipe after they are laid and tested complete all as specified and directed..

All as per item No. 41.00 abovebut for 200 mm interal dia of pipes.

M&L for 150 mm internal dia reinforced concrete pipes class NP-2 laid in trenches and jointed complete all as specified and directed.

All as per item No 43.00 above but for 200 mm interal dia of pipes.

Demolition of reinforced concrete as in manhole, drain cover slab etc in any position complete all as specified and directed.

M&L for plain cement concrete Type B1 1:2:4 (using 20 mm graded granite stone aggregate) in copings and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

S&F cast iron soil waste and vent pipes (sand cast) in any length with or without ears cement joints in trenches or in floors using sand cast CI pipes 100 mm bore pipes etc complete all as specified incl dismantling in repair complete all as specified and directed.

All as per item No.47.00 above but fixed in wall 100 mm bore.

All as per item No. 47.00 above but fixed in wall 75 mm bore.

S&F in repair new CI bends (any radius) or diminishing pieces or tapers (larger bore measured) suitable for 100 mm bore incl dismantling of old CI bends complete all as specified and directed.

All as per item No.50.00 above but for 75 mm bore.

All as per item No. 50.00 above 100 CI Tee, Y-Shape or parellel branches pieces ordinary or inverted complete all as specified and directed.

All as per item No. 50.00 above but for 75 mm bore.

M&L for precast RCC cover slab etc of cemet concrete type B-1 (1:2:4) using 20 mm graded stone aggt and set in 1:6 cement mortar complete all as specified and directed.

Returning and filling in including spreding and levelling watering and well and ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated soil not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr from the starting point complete all as specified and directed.

M&L for remove the blockage from water closet any pattern gully/floor trap etc upto & including 1st manhole & removing sludge up to 200 m from MD land or disposing by excavating ditches and making good to the disturbed surfaces complete all as specified and directed. Note:- (i) All the tools and plants and other allted arrangement for making sewage line functional will be made by the contractor without any extra cost to the Govt. (ii) The details of Safaiwala shall be submitted by the contractor to GE through Engineer-in-Ccarge,Name,Father'Name,full address with pass port size photo and isurance of employees (Safaiwala) within Cleaning of line after commencement of work along with insurance from Govt Agency. Note:- The wait safaiwala will report to JE concern at 0900 Hrs daily except holiday for attending day to day complaint.

Cleaning of sewage line / drainages of any description, size and depth by roding and and removing the blockage and removing sludge beyond MD land and including maintenance of sewage line for proper functioning complete all as specified and directed. Note:- Cleaning of drains shall be done after remoning of cover slab and after cleaning clab slab shall be putted on drains.

Dismantling of PVC/AC rain water pipe any dia including all fitting heads shoes bends etc complete all as specified and directed.

S&F PVC SWR pipes 110 mm dia single socketed in any length with rubber ring joints fixed to wall complete complete all as specified and as directed.

S&F 110 mm dia bore PVC (SWR) bend any radius complete all as specified and directed.

All as per item No. 61.00 above but shoes and cowl 110mm complete all as specified and directed.

S&F PVC (SWR) "T" junction single equal or unequal 110mm complete all as specified and directed.

Pumping out of water/liquid/sludge or any other waste/materials stagnated in septic tank/soak wells and discharge the same to nallah/drains through hose pipe or by other means upto distance of 250 mtr complete all as specified and directed.

Cleaning of septic tank/manholes of any depth/area/condition including taking out all the stagnated sludge or any other material mixed with the sludge etc complete and disposal of all spoils/waste or any other materials out site the MD laid but not complete all as specified and directed. Note:- 50 % of whole volume of sludge shall be considered as solied content for measurement and balance is for foul water.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work complete all as specified and directed.

M&L for Fair finished flat Form work to soffits of suspended slabs such as roof slabs, floor slabs and similar work not exce 200 mm thick complete all as specified and directed.

M&L for Fair finished flat Form work to edges of suspended slabs such as roof slabs, floor slabs and similar work exce 200 mm wide complete all as specified and directed.

M&L for 16 mm side square bars in rungs and similar works confirming to Fe-290, Gde-E-165 complete all as specfied and directed.

S&F in repairs plastic water closet seat cover white closed pattern with flat bottom and cover with MS Chromium plated hinging devices ISI marked as approved complete all as specified and directed.

S&F in repairs vitrious china wash down water closet pan, (pedestal pattern) white (excluding materials and labour of flushing cistern and flush pipe) incl connection to trap and to flush pipe complete including 'P' or 'S' trap etc complete incl making good to floor complete all as specified and directed.

S&F in repairs vitrious china squating pan Orrissa pattern of size 580x 440 mm white, with integral foot rests, with and incl P or S trap (excluding materials and labour of flushing cistern and flush pipe) incl connection to trap and to flush pipe etc complete incl making good to floor complete all as specified and as directed.

S&F in repairs vitrious china bowl urinal flat back, size of 465x355x265 mm white (minimum), with grating and union for discharge pipe (excluding materials and labour of flushing cistern, flush pipe and waste pipe) incl connection to trap and to flush pipe etc complete incl making good to floor complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type of 10 ltrs capacity flushing cistern, high or low level , white, with inlet , ball valve, float and handle including brackets incl connection to water closet and to flush pipe etc complete incl making good to floor complete all as specified and as directed.

S&F in repairs, Rimless Single piece WC with UF soft close seat cover, hinges, fixing accessories, accessories set and cistern fittings, size 390x710x720 mm including connection to trap and drain complete all as specified and directed by Engineer-in-Charge. Make - Jaquar Modle No. VGS-WHT-81853S300UF or equivalent as approved by GE.

Demolition of cement concret of any description and in any position not otherwise specifical provided for complete all as specified and as directed.

S&F in repair 150/200mm size galvanised hasp and staple to be fixed on fixed type steel almirah by welding/drilling/nut bolt/ rebated with complete arrangement to lock to fixed almirah shutter complete all as specified and directed by Engineer-in-Charge.

S&F in repair MS work as in legs (as required) to be fixed on fixed type steel almirah by welding/drilling/nut bolt/ rebated and replacement of handle etc with complete arrangement to fixed almirah and painting to match existing surface complete all as specified and directed by Engineer-in-Charge.

Taking down of chowkhats or frame with shutters n.exe. 1.5 Sqm each without taking of shutter from the frame complete all as specified and directed by Engineer-in-Charge.

Taking down of chowkhats or frame with shutters exe. 1.5 Sqm but nexc. 4 Sqm each without taking of shutter from the frame complete all as specified and as directed.

Taking down shutter of any description nexc 1.00 sqm each , complete all as specified and directed by Engineer-in-Charge.

Taking down shutter of any description exc 1.00 sqm but n exc 2.0 Sqm each , complete all as specified and directed by Engineer-in-Charge.

Taking down and refixing of shutter in same opening after resecuring or easing & adjusting of any description exc 1.00 sqm but n.exc 2.0 Sqm each , complete all as specified and directed by Engineer-in-Charge.

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete of size 125 X 60 mm complete all as specified and as directed.

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete of size 105 X 60 mm complete all as specified and as directed.

S&F second class hard wood in scantling clean sawn as timber framed work complete all as specified and as directed.

S&F framed work as in door frame or gated of angle or other section with gusset plates, rails, braces etc., completted drilled for fixing of steel sheeting or covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering, running rails and guides) and hanging ; also fastening and fixing completed ( Fe 401-W (Gde-E-250) qualituyA) complete all as specified and as directed.

S&F for 2nd class hard wood 35 mm thick plain framed, panelled shutter (two no of panels) with lock rail and panel of 12 mm BWP commercial ply complete all as spd and directed. The size of rail and stiles shall be as per IS -1003 (part-1) , kiln seasoned and chemically pressure treated, complete all as specified and directed by Engineer-in-charge.

S&F for 30 mm thick Flush shutter solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and as directed.

S&F for 2nd class HW glazed and skelton shutters 30mm open rebated and prepared to receive glass, gauze etc (any number of sash bars) edges of framing plain chamferred or rounded fitted with mitred beads for securing glass etc sizes of member of shutter as spd in SSR Pt-1 , section 8, clause 8.20 complete all as specified and directed by Engineer-in-Charge.

S&F for solid PVC door frame (single rebated) of size 50mm x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified & shown on drawing complete all as specified and directed by Engineer-in-Charge.

S&F for Factory made solid PVC doors shutter 30 mm thick(syles) consisting of frame made out of MS tube of top and bottom rals MS frame shall be coverred with heat moulded plain colour PVC'C' channel having a PVC sheet strip of 20 mm width struck in side with solvent cement for styles and plain colour PVC sheet for top rail lock rail and bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement , suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engineer-in-Charge.

S&F Aluminium, anodised barrel tower bolt of extruded section of 150mm long complete all as specified and directed by Engineer-in-Charge.

S&F Aluminium handles extruded type ,anodised of 150 mm size complete all as specified and directed by Engineer-in-Charge.

S&F Aluminium handles extruded type ,anodised of 100 mm size complete all as specified and directed by Engineer-in-Charge.

S&F 100 mm size butt hinges medium weight cold rolled stain less steel complete all as specified and directed by Engineer-in-Charge.

S&F Brass chromium plated towel ring , fixed in repair.Make Prayag Cat No BA 02 or equivalent complete all as specified and as directed.

S&F steel window with side hung shutters including box type hinges with Z section, 100mm steel handle, 75mm long two nos tower bolt each shutter, and steel peg stay complete without glazing bar dovetailed or welded including one coat shop zinc chrome primer complete all as specified and directed by Engr-in-Charge.

S&F in repair Steel window with side hung shutters including box type hinges with Z section, 100mm steel handle, 75mm long two nos tower bolt each shutter, and steel peg stay complete with glazing bar dovetailed or welded including one coat shop zinc chrome primer complete all as specified and directed by Engineer-in-Charge.

M&L in repair Prelaminated particle board 18/19mm thick interior grade prelaminated one side and decorative choice lamination & other side balancing white lamination fixed with screws to timber framework inclding wooden beading, lipping all around the pannel as in cup board shutter incl taking down complete all as specified and as directed.

S&F in repairs roof trusses (framed), trussed. Purlins, crane gantries rails and fastenings and heavy bracket framing (Beam, tea, angle, channel or flat section) including distance pieces,cleats etc complete confirming to Fe410-W (Gde-E-250) quality A complete all as specified and as directed.

S&F framed work such as grills,grating etc with ends of bars shouldered and/or riveted or forged into spikes ,framed gaured bars, barred iron doors,ladders,framed balusters, walkways, railings, framework of watertank and similar work conforming to Fe 290 Gde-E-165 complete all as specified and as directed.

S&F in repair 18 mm thick PVC sheet minimum 600 Kg Density grade 1 quality one side decorative lamination and other side plain white color to make kitchen cabinet/drawer/cupboard shutters fixed with screws solvent cement adhesive as per manufacturer instructions to make kitchen cabinet sides, top and bottom shelves inside complete all as specified and directed .

S&F in repair 18 mm thick PVC sheet minimum 600 Kg Density grade 1 quality of both side plain white color rigid and glossy finish and fixed with screws solvent cement/adhesive as per manufacturer instructions to make kitchen cabinet/cupboard sides top and bottom shelves inside complete all as specified and directed .

S&F Continous piano hinges, mild steel, bright finish or electro galvanised of 40 mm size complete all as specified and as directed.

S&F in repair 300 mm corneer glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard complete all as specified

S&F 100 mm extruded aluminium alloy handles, fabricated type., anodised complete all as specified and as directed.

S&F 100 mm Hasp and staple, stainless steel,or aluminium alloy wire type, , including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.

S&F Aluminium, anodised barrel tower bolt of extruded section of 150mm long complete all as specified complete all as specified and directed by Engineer-in-Charge.

S&F sliding channel and necessary fittingand fixtures for drawers to be fixed with prelaminated partice board complete all as specified and as directed.

S&F in repair stainless steel grating 100mm square/round with or without hole complete all as specified and as directed.

S&F in repair stainless steel grating 75 mm square/round with or without hole complete all as specified and as directed.

M&L for 10 mm thick rendering on fair faces of brick work, finished even & smooth without using extra cement in CM 1:6, complete all as specified and directed by Engineer-in-Charge.

M&L for 10 mm thick ceiling plaster including dubbing out average 10 mm thick in CM 1:4 and applying three coat white wash incl. preparation of new surface complete all as specified and directed by Engineer-in-Charge.

M&L for two coats of cement base paint on new wall after preperation of plastered surface complete all as specified and as directed.

M&L for preparing newly plastered surfaces of walls and applying two coats with distemper oil emulsion after providing chalk whitening (preparatory to distempering) , complete all as specified and directed by Engineer-in-Charge.

M&L for preperation for old surface of wall after complete removal of existing treatment of wall applying two coat of oil bound distemper complete all as specified and directed by Engineer-in-Charge.

M&L for painting with two coats of synthetic enamel paint over one coat of pink primer on new surface wood based surface exe. 10 cm width or girth, complete all as specified and directed by Engineer-in-Charge.

M&L for preparatiion of old painted steel surface and applying one coat of of synthetic enamel paints on steel over 10cm width or girth complete all as specified and as directed.

M&L for preparatiion of old painted and applying one coat of of synthetic enamel paints on wooden surface over 10cm width or girth complete all as specified and as directed.

M&L preparing of old plastered surface of ceiling and applying one coat of white wash complete all as specified and directed.

Repairs to broken edges of roof projection ,chajja facia and simillars works girth n exc 30 CM with 15 mm thick plaster including dubbing coat in CM 1:4 and applying two coat of cement base paint complete all as specified and directed by Engineer-in-Charge.

S&F fixed in repairs fancy type 19/20 mm drapery curtain rod stainless steel tubing with PVC layer and two nos brass finish (Latto) with two nos bracket complete fixing arrangement complete all as specified and directed by Engineer-in-Charge..

S&F fixed in repairs set of two nos PVC brass coated finials (Latto) to be fixed with 19/20 mm drappery/curtain rod complete all as specified and as directed.

S&F in repairs harrison rails,mild steel, chromium plated with fixing brackets, stops, rollers etc complete as as specified and directed.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples in steel / wooden / Z section windoow, ventilator & doors with necessary wooden beading / pin / nut bolt including necessary flat etc. complete all as specified and directed by Engineer-in-Charge.

S&F mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples in steel / wooden windoow, ventilator & doors with necessary wooden beading or complete all as specified and directed by Engineer-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/ spring clips and S&F 3.0 mm thick sheet glass ordinary quality and glazing with oil putty /wooden beads in square n exc 0.5 sqm each pane up to three storey hight complete all as specified and directed by Engineer-in-Charge

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/ spring clips and S&F 5.5 mm thick sheet glass ordinary quality and glazing with oil putty /wooden beads in squarebut exc 0.5 sqm each pane up to three storey hight complete all as specified and directed by Engineer-in-Charge

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty /wooden beads in square n exc 0.5 sqm each pane up to three storey hight complete all as specified and directed by Engineer-in-Charge

S&F 12mm toghened glass as in hinge doors partions automatic doors and similar work including cutting to shape, drilling holes completed all as specified and as directed.

S&F in repairs Steel rolling shutters 1.25mm thick, without ball bearing , as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete:with gear operated type with bevel gear box and crank handle complete all as specified and as directed.

S&F safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed.

S&F Ball bearing for rolling shutters complete all as specified and as directed.

S&F in repair chromium plated Toilet paper holder fixed with two nos of screws complete all as spd and directed

S&F in repair Aluminium sliding window lock of suitable size complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre ,pulp, insulation etc )or insulation boards/slabs/blankets,any thickness,including cover fillets complete all as specified and as directed.

S&F anodised aluminium snap grid frame work of size 605x605 mm for false ceiling complete all as specified and as directed.

M&L for Non asbestos fibre cement buildings boards 12mm thick fixed or laid/inserted to timber/GI/Aliminium frame work with screws complete all as specified and as directed.

M&L for providing and injecting chemical emulsion for Post Construction Anti-termite Treatment along exteernal wall where the apron is not provided using chemical emulsion at the rate of 7.5 liters per sqm of the vertical surface of the substructure to a depth of 300 mm including excavating channel along the wall and rodding etc., complete all as specified and as directed.

M&L for providing for external wall below concrete or masonary apron using chemical @ 2.25 litres per linear meter including drilling and plugging holes etc., in apron complete all as specified and as directed.

M&L for voids in masonry using chemical emulsion one litre per hole, at 300 mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) tomatch floors complete all as specified and as directed.

M&L for at points of contact of wood work by chemical emulsion (in oil of kerosene based solution) @ 0.5 litre/hole by drilling 6 mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the samecomplete all as specified and as directed.

Dismantling asbestos cement (corrugated,semi corrugated,etc) sheets in roof covering complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

Dismantling boarding,any description ,fixed in any position with nails complete all as specified and directed

S&F in PVC wall lining consisting of 5 mm thick colour wood grain printed PVC Sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specificication and drawing complete all as specified and as directed.

S& Fixed in repair 140 mm floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring, fixed in floor, complete all as specified and as directed.

S&F in repairs looking mirror of size 600mm x 450mmx 5.5mm fixed on 6mm thick commercial decorative water proofing ply wood with coloured PVC frame all around and hook complete all as specified and directed.

Repair of Aluminium door/ window rearange /replacement of damaged rubber beading and tighttening etc. and refixing the same opening , area of each door / window exc. 1.0 Sqm but n.exc. 2.0 Sqm each incl necessary required fittings and fixture complete all as specified and directed.

S&F in repair stainless steel utensil rack 1 mm thick of size 900x900mm and fixing to wall with screws complete all as specified and directed by Engineer-in-Charge.

S&F Anodised aluminium frame for doors,windows,ventilators with one or morerebates including joining cleat for fixing ect complete all as specified and as directed.

S&F Anodised aluminium door shutters,aluminium section wighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing,handle 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and as directed.

S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar,aluminium section wighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber packing, anodised aluminium snap beading screws etc complete all as specified and as directed.

S&F Anodised aluminium window and ventilator shutters, side hung type without sash ,aluminium section wighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150 mm long (1 no.) hinges type B-12 100mm long (2 no.) complete all as specified and as directed.

S&F in repair double action floor door spring hydraulically regulated made of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover,govering pivot made of mild steel heavy duty suitable for Aluminium door complete all as specified and as directed.

ABC CONSTRUCTION CO

His And Her Enterprises

Saket Traders

R K BROTHERS

awashyakta enterprises

VIMAL KUMAR CONTRACTOR

Jairajyadav security services

M/s SKP CONSTRUCTION