8122/SAR-21/2022-23

Amount

Supply, fixing, jointing and testing in replacement of ISI Marked, of approved quality, gun metal gate valve 50mm with iron wheel head, both ends screwed for iron pipe complete all as specified and directed.

Supply, fixing, jointing and testing in replacement of ISI Marked, of approved quality, gun metal gate valve 40mm with iron wheel head, both ends screwed for iron pipe complete all as specified and directed.

Supply, fixing, jointing and testing in replacement of ISI Marked, of approved quality, gun metal gate valve 25mm with iron wheel head, both ends screwed for iron pipe complete all as specified and directed.

Supply, fixing, jointing and testing in replacement of ISI Marked, of approved quality, gun metal gate valve 20mm with iron wheel head, both ends screwed for iron pipe complete all as specified and directed.

Supply, fixing, jointing and testing in replacement of ISI Marked, of approved quality, gun metal gate valve 15mm with iron wheel head, both ends screwed for iron pipe complete all as specified and directed.

S&F in replacement of ISI Marked, of approved quality, Butter fly valve of size 80mm bore lever operated CI complete with jointing and testing including cutting of exiting GI/CI/DI pipelines insertion of flanges, welding works if required complete all as specified and directed.

S&F in replacement of ISI Marked, of approved quality, Butter fly valve of size 100mm bore lever operated CI complete with jointing and testing including cutting of exiting GI/CI/DI pipelines insertion of flanges, welding works if required complete all as specified and directed.

S&F in replacement of ISI Marked, of approved quality, Butter fly valve of size 150mm bore lever operated CI complete with jointing and testing including cutting of exiting GI/CI/DI pipelines insertion of flanges, welding works if required complete all as specified and directed.

Supply and fixing in replacement ISI Marked, of approved quality, cast iron non return valve, both ends flanged jointed and tested complete all as specified and directed for 150 mm bore sizes.

Supply & Fix in replacement of Wall Mounted pump starter panel for pump capacity 30-40 HP star-delta system fully automatic with suitable contactors, timer, over load relay,suitable CTs, single phase preventor, relays, indicating lamps, push start/stop buttons etc housed in powder caoted sheet metal enclosure 2.0mm thick with proper wiring, termination, ferruling, marking etc. Note:- starter Enclosure and switchgears like contactors, MCBs shall be of same make.

M&L for MCCB 125 Amp 4 pole 415 V, 50 Hzs, 25 KA including taking out old U/S one, complete all as specified and as directed by Engineer-in-Charge. Make :-L&T/ Legrand/ schneider

S&F in replacement of submersible starter panel for 1.0 Hp to 2.0 Hp pump set single phase 50Hz complete all as specified and as directed by Engineer-in-Charge. Make:- Havells/BCH/C&S

S&F in replacement of submersible three phase DOL starter panel for 3.0 Hp to 7.5 Hp pump set single phase 50Hz complete all as specified and as directed by Engineer-in-Charge. Make:- Havells/BCH/C&S

S&F in replacement of MCB TPN /Isolator 4Pole 40 Amps 10KA with suitable sheet metal enclosure complete all as specified and as directed by Engineer-in-charge

S&F replacement of heating element ISI markedupto 3KW including connecting with electrical connections, complete all as specified and as directed by Engineer-in-Charge. Make :-Theeta

S&F replacement of thermostat ISI marked as per matching existing sample including connecting with electrical connections, complete all as specified and as directed by Engineer-in-Charge. Make :-Theeta

Supply, connection and testing of submersible cable copper conductor 3 core 1100 Volt grade 10 sq mm nominal cross sectional area including disconnecting the old u/s cable complete all as specified and directed by Engr-in-charge.

Lifting / taking out the defective submersible pump motor set of any capacity and description / make, any depth from bore well by lifting, chain pulley etc all as required carefully, by disconnecting / dismantling all electric connections, PVC/MS column pipes of size 32/40 mm etc and transporting the defective pump motor set to workshop, lowering the same after cleaning for any blockage /repair/new pump or motor set to the existing location including replacing the rubber packing/ GI nut bolts of the column pipes etc of suitable size where ever required complete all as specified and as directed by Engr-in-charge.

Lifting / taking out the defective submersible pump motor set of any capacity and description / make, any depth from bore well by lifting tolls , chain pulley etc all as required carefully, by disconnecting / dismantling all electric connections, column pipes of size 100 mm etc and transporting the defective pump motor set to workshop, lowering the same /repaired/ new serviceable submersible pump or motor set to the existing location including replacing the rubber packing/ GI nut bolts of the column pipes etc of suitable size where ever required complete all as specified and as directed by Engr-in-charge.

M&L and T&P for rewinding of submersible motor 30/35 Hp complete all as specified and as directed by Engineer-in-Charge.

M&L and T&P for repair of submersible pump 30/35 Hp including seals, bush, bearings impellers etc complete all as specified and as directed by Engineer-in-Charge.

M&L and T&P for rewinding of submersible motor upto 02 Hp complete all as specified and as directed by Engineer-in-Charge.

M&L and T&P for repair of submersible pump upto 02 Hp including seals, bush, bearings impellers etc complete all as specified and as directed by Engineer-in-Charge.

Supply, fixing and testing in replacement of submersible electric driven pump only with operating Head range 35-118 mtrs, 20 stage, LPM range 90-20 size 32x32 or 40/40 mm suitable for 2.0 HP motor or as per ground sample of same head complete all as specified and as directed by Engr-in-charge. Make :- KSB/ Kirloskar / Crompton. (Taking out and lowering of pump motor set will be measured and paid separately).

Supply, fixing, connecting electric connections and testing in replacement of submersible motor only capacity 02 HP 1 phase 230 volts, 50 HZ with outer dia of motor suitable to be coupled with pump ground sample of complete all specified and as directed. (Taking out and lowering of pump will be measured and paid separately).

Supply, fixing and testing in replacement of submersible electric driven pump only with outer dia of pump not exceeding 150 mm having discharge range 2400-60 LPM at 5-306 Mtr head, 5 stage suitable for 30 HP Motor with outlet 100mm motor or as per ground sample of same head complete all as specified and as directed by Engr-in-charge. (Taking out and lowering of pump will be measured and paid separately).

Supply, fixing, connecting electric connections and testing in replacement of submersible motor only capacity 25/30 HP 3 phase 415 volts, 50 HZ with outer dia of motor not exceeding 150 mm suitable to be coupled with pump as mentioned in item No. 26 hereinbefore or as per ground sample of complete all specified and as directed. (Taking out and lowering of pump will be measured and paid separately).

S&F in replacement of HDPE lowering pipe heavy duty of size 32/40 mm dia complete with GI safety wire all as specified and as directed.

M&L for construction of brick masonry valve pit /chamber complete size 900x900 (depth as required at site) (internal dimensions) and including necessary excavation & earth work in any type of soil complete all as specified and directed by Engr-in-charge.

M&L for Valve pit chamber cover with 6mm thick MS sheet cover including angle iron frame 40X40X6mm dully painted with locking and lifting handle arrangement of size upto1100x1100 mm (or any fabrication required at site) with PCC for fixing of the same complete all as specified and directed by Engr-in-charge.

Collection of water samples from various bore wells/sumps in sterilized bottles all as per the standard instructions and guidelines of the Chief Water Analyst of Department of water and Sewage examinations from IIT Rookee, transporting the samples safely and getting the same tested for chemical and bactyeriological tests, with and without chlorination test from the same Institute and report submitted to this office complete all as specified and directed.

M&L for Lifting / Taking out the deffective Non Clogging Sewage Pump Submersible KRTU type and discription/ make any type from sewage sump by lifting Chain Pully etc all as required carefully by disconnecting / dismantling all electic connections, Column Pipe any size 80/100mm etc. and transporting the defectiv pump moter set to AGE E/M yard, lowring New Serviceable Pump Moter Set to the Existing Location including Replacing the Rubber Packing / GI Nuts Bolts of the Column Pipes , Valves etc of Suitable size complete all as specified and as directed by Engineer-in-Charge.

M&L and T&P for repair of non-clogging sewage submersible pump 20-30 Hp including rewinding, mechanical seals, bush, bearings impellers etc complete all as specified and as directed by Engineer-in-Charge.

Supply, fixing and testing in replacement of non-clogging sewage submersible pump type KRTU PK 100-260/74G head 22.5m discharge 30 Cum /Hr, complete all as specified and as directed by Engineer-in-Charge.

Supply, fixing and testing in replacement of starter for non-clogging sewage submersible pump of capacity upto 20 HP with protection from over heating, over voltage/current, low water level complete of same make as per item srl No. 34 here-in-before all as specified and as directed by Engineer-in-Charge. Make KSB/equivalent as specified in list of makes.

Supply & Fix in replacement of FRP hypo-chlorine powder granules solution preparartion cum setting tank capacity 100 Ltrs with lid, port hole, inlet/outlet/drain connection level gauge etc and fitted with 1 phase 0.5HP motor and agitator rod complete with wiring. complete all as specified and as directed by Engineer-in-Charge. Make :-Pearl Filter Equipment Co.

Supply & Fix in replacement of Decrin Dosing Pump, Pump Tube And White Suction 1 Decrin Dosing Pump, High Pressure Single Head Gear Motored Adjustable Dosing Pump With All Accessories with Pump Tube, injection check valve,foot valve, strainer etc - 02 Set spare, complete all as specified and as directed by Engineer-in-Charge. Make: Declibac Technologies Private Limited/ RAMCO

Supply only calcium hypo chlorite having at 60 to 70 % available Chlorine in granuales disinfectant in sealed container of 45 Kg plastic drum for water treatment as directed by Engineer in charge. Note:- Contractor must be provided orginal manufacturing's test certificate with Hologram.complete all as specified and as directed by Engineer-in-Charge.

Supply & fix in replacement open well fountain submersible pump set (with motor) of capacity 1HP with head min 10 meter complete with fixing accessories like clamps, PVC HDPE pipe connection, any GI fitting required to connection and suitable starter panel all as specified and as directed by Engineer-in-charge.

S&F in replacement of LED aviation obstruction light yellow painted die cast aluminium alloy housing with 12W max consumption with all accessories complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in replacement of metalic body type resistor as per exiting sample/ size for actuator suitable for of size 80mm to 200mm dia butter fly valve, complete all as specified and as directed by Engineer-in-Charge.

Supply only in replacement of limit switch as per exiting sample/ size for actuator suitable for of size 80mm to 200mm dia butterfly valve , complete all as specified and as directed by Engineer-in-Charge.

Supply only in replacement of hand wheel or as per exiting sample/ model for actuator suitable for of size 80mm to 150mm dia butterfly valve as per exiting sample/ size complete all as specified and as directed by Engineer-in-Charge.

Supply only in replacement of electric motor suitable for actuator for 80 mm dia butterfly valve as per exiting sample/ size, complete all as specified and as directed by Engineer-in-Charge.

Supply and Fix in replacement of electric motor suitable for actuator for 150 mm dia butterfly valve as per exiting sample/ size.

Supply and Fix in replacement of mechanical gear box suitable for actuator for 80 mm dia butterfly valve as per exiting sample/ size.

Supply and Fix in replacement of mechanical gear box suitable for actuator for 150 mm dia butterfly valve as per exiting sample/ size.

Supply and Fix in replacement of rust proof, maintenance free magnetic float switch / water level sensor as per exiting sample/ size

Supply and Fix in replacement of ISI Marked, of approved quality, Butter fly valve of size 80mm bore gear operated CI complete with jointing and testing including cutting of exiting GI/CI/DI pipelines insertion of flanges, welding works if required complete all as specified and directed.

Supply and Fix in replacement of ISI Marked, of approved quality, Butter fly valve of size 150mm bore gear operated CI complete with jointing and testing including cutting of exiting GI/CI/DI pipelines insertion of flanges, welding works if required complete all as specified and directed.

Supply, Laying in trenches under floor/hard standing, road connecting, jointing and testing of Ductile iron (DI) pressure pipe centrifugally cast with socket and spigot ends confirming to IS-8329/2000 in standard length of K-7 specifications with outside metallic zinc coating with finishing layer of bituminous paint and internal lining with Portland cement mortar with seal coat of epoxy based material, complete with EPDM rubber ring joint as pe IS-5382 size 100mm bore (nominal size). Note : (i) Earth work shall be measured & paid separately under respective item of sch (ii) Making good of disturbed surfaces to match with existing surface is deemed to be included in quoted rates.

Supply, Laying in trenches under floor/hard standing, road connecting, jointing and testing of Ductile iron (DI) pressure pipe centrifugally cast with socket and spigot ends confirming to IS-8329/2000 in standard length of K-7 specifications with outside metallic zinc coating with finishing layer of bituminous paint and internal lining with Portland cement mortar with seal coat of epoxy based material, complete with EPDM rubber ring joint as pe IS-5382 size 150mm bore (nominal size). Note : (i) Earth work shall be measured & paid separately under respective item of sch (ii) Making good of disturbed surfaces to match with existing surface is deemed to be included in quoted rates.

M&L for earthing in replacement of with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 Mtr below ground level) with top edge of earth plate not less than 1.5 Mtrs below ground level connected to GI strip 32x6mm as earth lead by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, including PCC (concrete chamber) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate, with fair finish internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge mesh, 80 mm thick RCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) and specified including provision of GI strip protected by 40 mm dia medium grade pipe and watering pipe shall be 20mm bore medium grade, and including all excavation and earth work & connecting the earthing to an earthing test point complete all as specified & directed by Engr-in-Charge.

Earth continuity conductor or main earthing GI strip 25X4mm fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. complete all as specified and as directed by Engineer-in-Charge.

Supply & Fix in replacement water meter class A ISI marked flanged type of size 150mm bore with replacement of not, bolts & washers complete all as specified and as directed by Engineer-in-Charge. Make:- Kranti/Dasmesh

Supply & Fix Strainer y type CI body of size 150mm bore complete with cutting existing line, installation of new flanges, bolts, nuts & washers, welding work complete all as specified and as directed by Engineer-in-charge

Supply & Fix LED 20W integrated Solar street light with Lithium Frro Phosphate battery pack 13.6Ah, solar panel with peak wattage 28W, cable connection Kit & charger built into luminaire in pressure die cast aluminium body with specially designed pole mounting bracket allows different tilt angle latteral & pole top mounting complete all as specified & directed by Engineer-in-charge. Make:- Philips / Surya/Bajaj

Excavation in trenches in any type of soil i.e. loose/soft not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in width and getting out complete all as specified and as directed by Engineer-In-Charge.

All as per item No. 58 above but in hard/dense soil/cutting of road/hard standing/breaking of PCC etccomplete all as specified and as directed by Engineer-in-Charge.

Returning, filling and including spreading, leveling and watering and well ramming in layers not exceeding 25 cm to achieve desired compactness as directed by Engineer-In-Charge.

Removing of excavated material/soil to a distance not exceeding 50 Mtrs and depositing at a level not exceeding 1.5 Mtr above the starting point all as directed by Engineer-In-Charge.

M&L for PCC 1:3:6 type C-2 (using 20 mm graded stone aggregates) for repairing of valve chamber foundation etc including filling in road cuts/ hard standing etc all as specified and as directed.

M&L for taking up/down GI water mains of 100mm bore,including all fittings all as specified and as directed by Engineer-in-Charge.(a) 100mm dia, complete all as specified and as directed by Engineer-in-Charge.

M&L for taking up/down GI water mains of 150mm bore,including all fittings complete, all as specified and as directed by Engineer-in-Charge.

M&L for DI fittings any type size as in bend, tee, tail piece, coller, reducer etc as per IS – 9523 marked complete all as specified and as directed by Engineer-in-Charge.

M&L for cutting existing steel tubing for making connection for new piping of size 40/50mm & screwing in existing DI 100 to 150mm dia tubing including all fittings like clamp, nuts & bolts etc, complete all as specified and as directed by Engineer-in-Charge.

M&L for cutting existing steel tubing for making connection for new piping of size upto 25mm & screwing in existing DI 100 to 150mm dia tubing including all fittings like clamp, nuts & bolts etc

DHIMAN ENGINEERS & BUILDERS

ISHWAR ELECTRICALS AND PROCESS SERVICES

Gupta Enterprises