Construction New Boundary Wall in Campus of P.D.J. Residence at Jamtara for the Year-2025-26

Amount

Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavation earth as obtained to a distance upto 50 M including all lifts, leveling ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design specification and direction of E/I.

Exta for earth work in hard soil as per approved design specification and direction of E/I. (vide classification of soil item-B)

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm. thick with all lead and lifts including cost of all materials labour royalty and taxes all complete as per building specification and direction of E/I. (mode of measurement compacted volume)

Providing designation 75 B one brick flat soling joints filled with local sand including cost of waterig taxes royalty all complete as per building specification and direction of E/I.

Providing and laying in postion cement concrete of specified grade excluding the cost of centering and suttering- all work upto plinth level:

Providing and laying in postion specifled grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement all work upto plinth level1:1.5:3 (1 cement:1.5 coarse sand (zone-III) :3 graded stone aggregate 20 mm. nominal size) taxes and royalty all complete job as per specification & direction of E/I.

Reinforced cement concrete work in Walls (any thickness), including attached pilasters, buttresses, plinths and string, courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level excluding the cost of centering, shuttering, finishing and reniforcement, with 1:1.5:3 (1 cement:1.5 coarse sand (zone-III) :3 graded stone aggregate 20 mm. nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for Columns, pillars piers, abutments, posts and struts

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete.

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers

Providing designation 75 B brick work in C.M. (1:6) IN FOUNDATION and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints, costs of screening, materials, raking out joints to 15 mm. depth curing taxes and royalty all complete job as per specification & direction of E/I.

Providing and laying in postion specifled grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement all work upto plinth level1:1.5:3 (1 cement:1.5 coarse sand (zone-III) :3 graded stone aggregate 20 mm. nominal size) taxes and royalty all complete job as per specification & direction of E/I.

Providing designation 100 A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9” x 4.5” x 3”) in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm. thick mortar joints cost of screening materials raking out joints to 20 mm. depth curing taxes and royalty all complete job as per building specification & direction of E/I.

Reinforced cement concrete work in beams, suspended, floors, roofs having stope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plan window sills, staircases and spiral stair cases above plinth level up to floor five level excluding the cost of centering, shuttering, finishing and reniforcement, with 1:1.5:3 (1 cement:1.5 coarse sand (zone-III) :3 graded stone aggregate 20 mm. nominal size)

Providing 12MM CEMENT PLASTER (1:6) with clean coarse sand of F.M.1.5 including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I.

Providing two coats of snowcem of apporved shade and make over a coat of cement primer on new surface including preparing plasted surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required scaffolding, curing and taxes and royalty all complete as per building specification and direction of E/I.

Supply for angle 50 x 50 x 6 mm. all complete job.

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)

Supplying, fitting and fixing 20 guage G.C.I. sheet gate fitted on M.S. angle frame of size 60 x 60 x 6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work taxes all complete as per building specification and direction of E/I.

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning removing dust, dirt scsales smokes and grease and cleaning the surface thoroughly cost scaffolding and taxes all complete as per Building specification and direction of E/I. (mode of measurement ares shall be multiplied by the co- efficent as indicated in building specification.)

Providing TWO COATS OF SYNTHETIC enamel PAINT of approved shade and make OVER ON STEEL SURFACE including preparing the surface after cleaning removing dirt, scales, smokes, grease and sand papering including cost of scaffolding and taxes and royalty all complete as per building specification and direction of E/I.

Providing Tor steel reinforcement of 8 mm, 10mm. ,12mm & 16mm dia. bars as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. {only valid for TATA (Tiscon), SAIL, JSPL, Electrosteels Ltd. Bokaro and Vizag (RINL)}

8mm dia

10mm dia

12mm dia

Carriage cost of materials

Stone chips

Bricks

Add 18% GST (In Basic Rate must fill 0.18)

Add 1% Labour cess (In Basic Rate must fill 0.01)

M/S BABA BASUKI NATH ENTERPRISES (BID ID -692275)

BHUPESH KUMAR GUPTA (BID ID -692233)

shree ganesh construction (BID ID -692248)