Repair and Renovation of Ranjan Guest House of Irrigation and Flood Control Department Canal Road Jammu under UT Capex Budget 2025-26

Removing dry or oil bound distemper water proofing cement paintg and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc complete.

Providing and fixing ( PVC) PC panelling including cost of panelling ,accessories labur etc complete.

Demolishing brick tile covering in teracing including stacking of serviceable material within 50Mtr lead.

Demolishing mud Phaska in terracing and disposal within 50 M lead.

Providing and laying integral cement based water proofing treatment including preparation of surfaces as required for treatment of roofs, balconies, terraces etc consisting of following operations. a) Applying a slurry coat of neat cement using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over the RCC Slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/ Brick Bats 25mm to 115mm size with 50% of Cement mortar 1:5 (1 Cement : 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 (1 Cement : 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer- in-charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of Junctions of walls and slabs) c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge. d) finishing the surface with 20mm thick joint less cement mortar of mix 1:4(1 cement: 4 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm/sq 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by Engineer- in-charge. 23.7.1 With average thickness of 120mm and minimum thickness at khurra as 65 mm

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge.

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coats

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) Powder coated aluminum (minimum thickness of powder coated 50 microns)

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) Powder coated aluminum (minimum thickness of powder coated 50 microns)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of tile 600x600 mm

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, laid on 20 mm thick cement mortar 1:4 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in- charge. Pre-laminated particle board with decorative lamination on both sides

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer- in-charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)

Providing and fixing Brass 100mm mortice latch and lock with 6levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing and fixing aluminum round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-charge. Powder coated minimum thickness 50 micron aluminum

Providing and fixing Anodized aluminum grill (Anodized transparent or dyed to required shade according to IS: 1868 minimum anodic coating of Grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing windows frame with C.P. brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved Anodized aluminum standard section around the opening, all complete as epr requirement and direction of Engineer-in-charge. (only weight of grill to be measured for payment)

Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. With Galvanized M.S. Wire gauge with wire of dia 0.63 mm

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing round shape counter washbasin of approved quality resting on granite platform ( jet black granite) and CP brass exposes part kit of Joystick basin mixer wall mounted consisting of operating lever. Catridge sleeve, wall flange, Nipple and spout including divertor ( Premium quality) of 15MM nominal bore cost, includes CP brass waste coupling all accessories complete job.

Providing and fixing white viteous china European type wall hung WC pan with 100 MM P & S trap concealed tank, hand shower for to ilets and all fittings etc complete including fitting in position in wall complete Job.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge

Providing and fixing white vitreous china pedestal type (European type/wash down type) water closet pan.

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.:19.4.2 Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall: 15 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.:19.4.2 Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall: 20mm dia. nominal bore

Constructing brick masonry chamber for underground C.I. inspection chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg ) R.C.C. top slab with 1:1 ½ : 3 mix ( 1 cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominal size),foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :Inside dimensions 455x610 mm and 45 cm deep for single pipe line-

Sweeper engaged for cleaning of drain lines.

Providing and fixing un-plasticised -PVC pipe clips of approved design to un-plasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.110 mm

Providing and fixing PVC trap cleaning design 100MM inlet and 100MM outlet

F bend of size of 100MM

P/F PVC single TEE without door 100MM dia

Providing and fixing soap dish

Providing and fixing CP town rail.

Providing and fixing cement conc. 1:5:10 including bed concrete.

Providing and fixing CP cup.

Providing and fixing CP grating.

P/F cement CP nipple.

Engage Iind carpenter for various works.

Engage labour for dismentling Almirah.

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:. All kinds of soil.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Cold twisted bars

Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Filling available excavated earth ( excluding rock) in trenches plinth sides of foundations etc in layers not exceeding 20CM in depth.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete

Carriage of sand and Bajri for average distance 10Km by MT.

Carriage of bricks for average 20 KM by MT.

Letering with black Japn paint.

Wiring for light point/fan point /ceiling fan point /exhaust fan point/call bed point with 1.5sq mm FRLS PVC insulted, copper conductor cable in surface /redcessed medium class PVC conduit, with pioano type switch, phenolic laminated sheet , suitable size M.S box and earthing the point with 1.5sq mm . FRLS PVC insulted copper conductor single core cable etc as required. ( Wire make ISI marked Havells/Anchor/HPL /KEI/Polycab conduit make-ISI marked Anchor/High power/AKG/equivalent make of required specification to be approved by the Enginer, in charge.

Wiring for circulat/sub main wiring along with earth wire with the following sizes of FRLS PVC insulted copper conductor , single core cable in surface/recessed medium class PVC conduit as required ( Wire make ISI marked havells/Anchor/HPL /KEI/ Polycab) equivalent make of required specification to be approved by the Enginer in charge. 1x2x1.5sqmm +1x1.5sqmm

Wiring for circulat/sub main wiring along with earth wire with the following sizes of FRLS PVC insulted copper conductor , single core cable in surface/recessed medium class PVC conduit as required ( Wire make ISI marked havells/Anchor/HPL /KEI/ Polycab) equivalent make of required specification to be approved by the Enginer in charge. 2x2.5sq mm + 1x2.5sq mm

Wiring for circulat/sub main wiring along with earth wire with the following sizes of FRLS PVC insulted copper conductor , single core cable in surface/recessed medium class PVC conduit as required ( Wire make ISI marked havells/Anchor/HPL /KEI/ Polycab) equivalent make of required specification to be approved by the Enginer in charge. 2x6 sqmm + 1x6sq mm

Supplyng and fixing 5Amp to 32Amps rating, 240/415 volets, 10 KA C curve minature circuit breaker of single pole in the existing MCB DB complete with connection=s, testing and commissioning etc as required.Single pole ( Make Havells./Anchor/C&SD/HPL/equivalennt make of required specfication to be approved by the Enginer, in charge.

Supplying and fxing following ratings, double plate 240 volts isolator in the existing MCB DB complete with connections, testing and commissioning etc required 63 Amp. rating . ( Make Anchor/Havells/HPL/Great white/equivalent make of required specification to be approved by the Enginer in charge.

Supply and fixing of metal box of following size on the surface /recess with suitable size of phenolic laminated sheet cover /recess with suitable size of penolic laminatged sheet cover in front including painting etc as required .200x125MMx60MM deep.

Supply and fixing of metal box of following size on the surface /recess with suitable size of phenolic laminated sheet cover /recess with suitable size of penolic laminatged sheet cover in front including painting etc as required .10MMx100MMx60MM deep..

Supplying and fxing 15/16 amp piano type switch on the existing switch box or cover including connection as required. ( Make Anchor/Havells/HPL/Great white/equivalent make of required specification to be approved by the Enginer in charge.

Supplying and fixing 6 pin 15/16 amp socket outlet on the exisiting switch box or cover including connection as required ( Make Havells/HPL/Anchor/Great white /equivalent make of required specification to be approved by the Enginer in charge.

Supply and fixing 5/6 amp piano type switch on the existing switch box or cover including connection as rrequired ( Make Havells/HPL/Anchor/Great whjite/equivalent make of required specification to be approved by the Enginer in charge.

Supply and fixing 3 pin 5/6 amp socket outlet on the exising switch box or cover including connection as required ( Make Havells/HPL/Anchor/Greast white /equivalent make of required specification to be approved by the Enginer in charge.

Supply and fixing two module stepped type electronic fan regulator on the existing modular plastic /switch box including connections but excluding modular plate etc as required ( Make havells/HPL/Anchor SSK /C&S/Great white /equivalent make of required specification to be approved by the Enginer, in charge.

Supplying and fxing brass batten/Angleholder includng connection etc as required ( Make Havells/HPL/Anchor/C&S/Great white /equivalent make of required specication to be appro.ved by the Enginer, in charge

Supplying and drawing of following sizes of FR PVC insulted copper conductor, single core cable in the existing surface /recessed steel/PVC condit as required ( Wire make ISI marked Havells/HPL /Anchor /KEI/Polycab/equivalent make of required specificaition to be approved by the Enginer in charge.( x1.5sqmm ) 1.1x1.5 sqmm

Earthwork with G.I earth plate 600mmx600MMx6MM thick including accessories and providing and masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc with charcoal/coke and salt as required.

Providing and fixinig 6 SWG dia G.I strip surface or in recess for connection etc as required.

Supply & installation of following type of surface mounted /recessed mounted decorative Indoor Linear energy saving, energy efficient LED Lumainiers complete with connection testing and commissioning, Make /( Halonix/Havells/Syska/Bajaj/Great white /Philips/HPL/equivalent make of required specications to be approved by the Enginer in charge. (a 18 to 22 Watt, 220 volets,50Hz,1200mm with rated input 140V to 270V, Lumen efficiency 100 lumens/watt/driver lumens/watt, driver efficiency 90 percent starting voltage 90v ,Thd< ,CRT> 80 CT 6500K, Life 25000 hours, surge 2.5 KV,P.F= 0.95 made of high grade polycarbonate body LED batten complete.

Supply ,installation testing commissioning of 1200Mm sweep ceiling fans complete with blades BEE 3 to 5 start rated engergy efficient ( Make Havells/Anchor/Orient/cromption/UHA equivalernt make of required specications to be aproved by the Enginer in charge.

Supply ,installation testing commissioning of heavy duty 300 MM sweep BEE 3 to 5 star rated engery efficient exhaust fan. Make ( Anchor/Havells/Bajaj/cromption/eqivalent make of required specifation to be approved by the enginer in charge.

Supply, testing and commissioning of window Air conditioner of 1.5 Ton capacity with 3start rting or above. Complete Job.