Construction of RCC Box Typ...

Providing and fixing of Mild steel Epoxy Painted side wall embadded Open Channel gate with SS304 Rising type spindle type with CIN Hand wheel operated of gate size 3000x2500 as per site suitable for 2.2 m Seating water head (From Invert), Flush bottom Closure,Close top frame gate.with Electric Actuator as IS Specification. complete in all respect as per approved make and directions of Engineer-in-charge as per respective size.Make:-Jash/Indian Valve Company(Nasik)

Providing and fixing of Mild steel Epoxy Painted side wall embadded Open Channel gate with SS304 Rising type spindle type with CIN Hand wheel operated of gate size 2500x2500 as per site suitable for 2.2 m Seating water head (From Invert), Flush bottom Closure,Close top frame gate.with Electric Actuator as IS Specification. complete in all respect as per approved make and directions of Engineer-in-charge as per respective size.Make:-Jash/Indian Valve Company(Nasik)

SFRC Single Road Gully cover and frame of size 610mm x 457 mm

Providing and applying tack coat with penetration grade bitumen VG - 10 using bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom as per technical clause 503 of MORTandH specifications

Providing and laying 50mm - 75 mm dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG 30 @ 4.5% by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete, as per technical clause No. 505 of MORTandH specifications

Providing and laying 30mm - 45 mm bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG - 30 @ 5.4% per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete as per technical clause 507 of per MORTH specifications

Disposal of dismttaled RMC Road material upto Basai Plant as directed by the Engineer-in-charge.Including loading,unloading and all other charges.

Plugging of existing drin and diversion of storm water including all pumpin machinery, manpower and t and p required at site compete n all respect as per sote requirement..

The Structural design and drawing of RCC Precast Box Drain and M.H. work will be submitted by the contractor to the department. dully vetted from Institute of reputed IIT, such as IIT Delhi, IIT Roorkee .The cost will be borne by the contractor. The work will be executed as per design drawing approved by department.

Providing and fixing factory-made wet cast high strength precast reinforced cement concrete box drain of Width X Height as per BOQ and as per approved drawing. Box Drain shall be steam cured in a controlled environment and manufactured by using high performance self compacting concrete of M- 50 grade using Fe 500 D grade TMT steel reinforcement bar. The Manhole opening at every 30 meter c/c shall be made by keeping as suitable clear opening of 600x600 mm in precast drain and the M.H. shaft shall be precast based on actual size requirement and Precast M.H. chamber of size 1000x 1000 x800 with clear opening on side for connection with road gully`s as per site requirement and chamber cover of size 1144 X 1144 X 150 with all necessary arrangement of steps as per standard specification of Haryana PWD, schedule of rates 2023.The precast box drain and M.H. shall consist of special in-built inserts at appropriate location for safer and faster installation. Design should confirm to IRC/BIS standards/ Guidelines/Codes furthermore taking into consideration expected handling and erection stresses etc. Rubber gasket required to ensure water-tight character and for jointing of each segment flange bolts with zinc coating and round washer or equivalent nut-bolt connection will be supplied as part of the box drain. Any international guideline such as Japan and EURO codes may be followed in case of any gap in IRC/BIS standard and guideline. The design of the box drain and M.H. dully vetted from Institute of IIT/NIT . The precast drain should be designed considering super imposed dead load, live load including dynamic impact, tractive and braking forces and earth pressure as per IRC:6-2017. Class AA loading or Class 70R Load live load should be considered (whichever is higher) for design. Box drain shall have inter-locking plug-socket arrangement. Precast manufacturer shall be certified for ISO 9001, ISO 14001 and ISO 45001. The precast factory should have its own NABL approved QA-QC laboratory within plant premises to ensure daily testing of precast products. Product shall be manufactured using RO water for durability criteria. Reinforcement cage shall be fabricated with automated cage making unit within plant premises having necessary machines like cutting and bending for getting consistent rebar production. Final product testing laboratory to test load carrying capacity. The work exciting as per the direction of Engineer In-charge. Size of Box Drain 2000 x 2500 x 1500 mm, Size of Box for M.H. 1000 x 1000 X 800 mm inside dimension or of suitable height as per site requirement and size of MH chamber cover 1144 X 1144 X 150.The rates are including dismantling of existing road and other utility coming under the alignment, excavation, refilling of earth dully proper compacting, 150mm thick GSB, 100mm thick M10, 20mm thick dry bedding mortar 1:3, disposal of extra earth as per direction of Engineer-in-charge, shifting of utility as per site requirement, proper barricading of site, arrangement of diversion of traffic, making the site smooth in original condition prepare alignment for construction of road. complete in all respects including defect lability with operation and maintenance for five year after commissioning of work free of cost complete in all respect. Precast drain make:- Fuji Infrastructure Technology, Siddhivinayak Pre-cast Pipes Pvt. Ltd and Fuji Silvertech Concreate Pvt. Ltd.