Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹96.6 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹1.2 Cr+₹27.6 L (28.6%)Admitted-Finance | L2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | SAMEER RIYAS L2 | AYSHA ENTERPRISES L1 |
|---|---|---|---|---|---|
| 1.00 | Providing wood work in farmes of doors, windows, clerestory windows and other frames wrought framed and fixed position II nd class Teak wood | 9 | Cum | 1,40,000 ₹12,60,000 | 1,00,000 ₹9,00,000 Lowest |
| 2.00 | Providing and fixing 30mm thick panelled, glazed or panelled and glazed shutters for doors windows and clerestory windows including anodised aluminium butt hinges with necessary screws. II nd class Teak wood | 80 | Sqm | 7,800 ₹6,24,000 | 4,000 ₹3,20,000 Lowest |
| 3.00 | Providing and fixing karimaruth wood or equivalent 25mm square wooden bars at required spacing in wooden frames of windows and clerestory windows | 150 | Mtr | 100 ₹15,000 Lowest | 100 ₹15,000 Lowest |
| 4.00 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer in-Charge. | 100 | Mtr | 200 ₹20,000 Lowest | 400 ₹40,000 |
| 5.00 | Providing and fixing to existing door frames. 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge (For W.C. and bathroom door shutter). | 72 | Sqm | 2,400 ₹1,72,800 | 2,000 ₹1,44,000 Lowest |
| 6.00 | Providing wood work in frames of false ceilings partitions etc sawn and put up in position II nd class Teak wood | 3 | cum | 1,40,000 ₹4,20,000 | 1,00,000 ₹3,00,000 Lowest |
| 7.00 | Providing and fixing at all height false ceiling of 4mm thick phenol bonded Bamboo Mat board (595x595mm) conforming to IS:13958- 1994 including providing and fixing of frame work made of GI angle 25x25x0.4 mm thick all around suitably fixed to wall with the help of dash fastener and hanger frame (600x600 c/c) made GI slotted Tee having powder coating on bottom side (30x25x0.3 mm thick for main member & 25x25x0.3 mm for cross member) connected to ceiling with 2.64mm GI wire and anchor fastener at every junction and also including cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed all complete as per direction of Engineer-in-charge | 809 | sqm | 2,300 ₹18,60,700 | 1,500 ₹12,13,500 Lowest |
| 8.00 | Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately) Natural colour insulating board 12 mm thick | 184 | sqm | 2,300 ₹4,23,200 | 750 ₹1,38,000 Lowest |
| 9.00 | Providing & fixing at all heights, levels and locations Mill finish Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping Stainless
steel screws M6, 50 mm long with 3 mm EPDM seal washer etc. all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge. (Cost of truss/frame work shall be paid separately).0.56 mm, Aluminium troughed profile with center to center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover width 1000mm. | 200 | sqm | 1,880 ₹3,76,000 | 1,200 ₹2,40,000 Lowest |
| 10.00 | Providing and fixing of Pre-coated colour or mill finish Aluminium Roofing Accessories in 0.71 mm thickness ,Alloy 31500 (IS designation) [Aluminium Alloy (AA) 3004 (ISO designation)] For color, coating shall be 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns, using self drilling/ tapping SS screws of size 6 x 50mm with 3mm thick EPDM seal and SS plain washer complete :Precoated/mill finish aluminium Ridges plain (500- 600mm) | 100 | sqm | 800 ₹80,000 Lowest | 1,000 ₹1,00,000 |
Tender Value
Refer Docs
EMD Value
₹2.0 L
Closing Date
22 Jun 2022, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer, LPWD Kavaratti
Executive Engineer, LPWD Kavaratti
Annual Repair and Maintenance of Govt. Girls Senior Secondary School Kavaratti. (Annual item rate contract for the year 2022-23)
2022_UTL_1860_1
NIT No. 31/NIT/EE Kvt/2022-23
Open Tender
Civil Works
Item Rate
90 days
Kavaratti
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,000
Executive Engineer, LPWD Kavaratti
₹2.0 L
30 Jun 2022
11 Jun 2022
22 Jun 2022
11 Jun 2022
22 Jun 2022
11 Jun 2022
75 days
Amount
Providing wood work in farmes of doors, windows, clerestory windows and other frames wrought framed and fixed position II nd class Teak wood
Providing and fixing 30mm thick panelled, glazed or panelled and glazed shutters for doors windows and clerestory windows including anodised aluminium butt hinges with necessary screws. II nd class Teak wood
Providing and fixing karimaruth wood or equivalent 25mm square wooden bars at required spacing in wooden frames of windows and clerestory windows
Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer in-Charge.
Providing and fixing to existing door frames. 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge (For W.C. and bathroom door shutter).
Providing wood work in frames of false ceilings partitions etc sawn and put up in position II nd class Teak wood
Providing and fixing at all height false ceiling of 4mm thick phenol bonded Bamboo Mat board (595x595mm) conforming to IS:13958- 1994 including providing and fixing of frame work made of GI angle 25x25x0.4 mm thick all around suitably fixed to wall with the help of dash fastener and hanger frame (600x600 c/c) made GI slotted Tee having powder coating on bottom side (30x25x0.3 mm thick for main member & 25x25x0.3 mm for cross member) connected to ceiling with 2.64mm GI wire and anchor fastener at every junction and also including cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed all complete as per direction of Engineer-in-charge
Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately) Natural colour insulating board 12 mm thick
Providing & fixing at all heights, levels and locations Mill finish Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping Stainless steel screws M6, 50 mm long with 3 mm EPDM seal washer etc. all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge. (Cost of truss/frame work shall be paid separately).0.56 mm, Aluminium troughed profile with center to center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover width 1000mm.
Providing and fixing of Pre-coated colour or mill finish Aluminium Roofing Accessories in 0.71 mm thickness ,Alloy 31500 (IS designation) [Aluminium Alloy (AA) 3004 (ISO designation)] For color, coating shall be 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns, using self drilling/ tapping SS screws of size 6 x 50mm with 3mm thick EPDM seal and SS plain washer complete :Precoated/mill finish aluminium Ridges plain (500- 600mm)
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade One or more coats on old work.(Berger/Asian/Nerolac/ICI)
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. Water thinnable cement primer ((Berger/Asian/Nerolac/ICI))
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on old work.
Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead :Cement mortar 1:4
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :(a( )250 x16mm
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete (A)125 mm
Providing and fixing bright finished brass hard drawn hooks and eyes (A) 200 mm
Providing and laying matt finish vitrified floor tiles (premium quality) in different sizes (thickness to be specified by the manufacture) with water absorbtion less than 0.08 % and confirming to IS: 15622 of approved make in all coulers and shades, laid 20mm thick cement mortar 1:4 (1 cement: 4 M Sand ) including grouting the joints in spacer with white cement and matching pigments etc.. complete. Size 800x800mm(flooring), matt finish vitrified tiles Marbonite of H&F ,Kajaria/Johnson/Somany/Oasis /Orient Bell/Nitco Rak of approved design 'pattern,colour and shade
Providing and laying matt finish vitrified tiles (premium quality) in different sizes (thickness to be specified by the manufacture) with water absorbtion less than 0.08 % and confirming to IS: 15622 of approved make in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 M Sand) including grouting the joints in spacer with white cement and matching pigments etc. complete. 800x800mm, matt finish vitrified tiles Marbonite of H&F ,Kajaria/Johnson/Somany/Oasis /Orient Bell/Nitco Rak of approved design 'pattern,colour and shade
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :. White EWC pan with plastic seat and lid.(Cera Conventional type Model No.2008/Hindware/ Parryware/Jaquar)
Providing and fixing white vitrous China wash basin with RS or CI brackets painted white, 15mm C.P bras pillar tap and C.P brass chain and rubber plug 32mm C,P. brass waste of standrad pattern 32mm diametre and waste pipe complete including cutting and making good the walls and floors where required. white vitrous china flat back wash basin 550x400mm with one 15mm C.P brass piller tap.(Cera Cognac Model No.1011/ Hindware/ Parryware/Cera/Jaquar)
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. .For External work. (Class I, SDR 11) ASTRAL/ASHIRVAD/FINOLAX (a ) 20 mm nominal outer dia .Pipes.
( b ) 32 mm nominal outer dia .Pipes.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittingsi/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes &fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.)(Class I, SDR 11) ASTRAL/ASHIRVAD/FINOLAX ( a ) 20 mm nominal outer dia .Pipes.
Providing and fixing CP brass bibcock of approved quality and manufacture complete.15 mm nominal bore(Cera/ Hindware/ Parryware /Jaquar/Kohler/Grohe)
Providing and fixing CP brass stopcock of approved quality and manufacture complete. 15 mm nominal bore (Cera/ Hindware/ Parryware)
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931.15 mm (Cera/ Hindware/ Parryware /Jaquar/Kohler/Grohe)
Providing and fixing CP brass Sink cock of approved quality and manufacture complete.20 mm (Cera/ Hindware/ Parryware /Jaquar/Kohler/Grohe)
Providing anf fixing Stailess steel A ISI 304 ( 18/8) kitchen sink asper IS 13983 with CI brackets stainless steel plug 40 mm ,including painting of fittings and brackets, cutting and making good the walls where required. (Neelkanth/Nirali/Jayna/Prayag). Kitchen sink with drain board 510x1040x 250 mm
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.. (SAINT GOBINE / MODI GUARD /AIS/PILKINGTON)
Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete..(a)100x70x4mm(ordinary type)
(b)75x65x4mm(heavy type)
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level ( 1 cement: 2 M.Sand: 4 granite chips 20 mm nomoinal size) foundation and plinth
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landings, shelves chajjas, lintel, bands, plain window sills, staircase and spiral staircase .. up to floor five level excluding cost of centring,shuttering and reinforcement . 1:1.5:3 (1 cement 1.5 M-sand 3 granite chipps 20mm nominal size
Cement concrete block (machine moulded) masonry in Foundation and plinth in CM 1:6 with blocks of size 40cmx20cmx15cm.
Cement concrete block (machine moulded) masonry in Superstructure above plinth level in CM 1:6 (1 Cement: 6 M.sand) with blocks of size 40cmx20cmx15cm.(Labour Element)
Steel work welded in built up section / framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer usin’g structural steel etc. as required. In grating, frames, guard bar, ladder, railings, brackets,gates and similar works.
Providing and fixing ceramic glazed floor tiles of size 300x300mm (thickness to be specified by the manufacture) of first quality confirming to IS:15622 of approved make, in colours such as White, ivory, Grey, Fume red brown, laid on 20mm thick cement mortar 1:4 (1 cement: 4 M Sand) and including grouting the joints in spacer with white cement and matching pigment etc. complete. (Matt / Smooth finish) Kajaria/Johnson/Somany/Oasis/Bell/Nitco Rak of approved design 'pattern,colour and shade.
Providing and fixing 1st quality ceramic glazed wall tiles confirming to IS:15622 (thickness to be specified by the manufacture) of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge in skirting,risers of steps and dado over 12mm thick cement mortar 1:3 (1 cement: 3 M Sand) and joining with grey cement slurry @3.3 kg per sqm, including grouting the joints in spacer pointing in white cement mixed with pigment of matching shade complete. 300x450 mm. (Matt / Smooth finish) Kajaria/Johnson/Somany/Oasis/Bell/Nitco Rak of approved design 'pattern,colour and shade.
12mm cement plaster in C.M.1:6(1cement,6M.sand)
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required EPDM rubber/ Neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer- in-charge. (Glazing and panelling to be paid for separately):For fixed portion. Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required EPDM rubber/ Neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer- in-charge. (Glazing and panelling to be paid for separately):For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade 1 Type II in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side.
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.00 mm thickness
Renewing glass panes and refixing existing wooden fillets::Float glass of thickness panes 4mm
French spirit polishing: One or more coats on old work.
Providing and fixing health faucet of approved quality and manufacture complete.(JAQUAR/KOHILER/GROHE)
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
Providing and fixing nominal guage PVC Pipe of approved quality compleate with special flang compression type fitting s including trenching and refilling etc. External work (6kg/cm2) (Prince/Supreme/Finolex) (a)110mm nominal bore
(b)75 mm nominal bore
(c) 63 mm nominal bore
(d)32mm nominal bore
(e)25mm nominal bore
Dislodging of septic tank including disposal of sludge by digging a pit within a lead of 50mtrs and covering it with sand including adding disifectants etc.including washing the tank and re-arranging of soak pit,man hole etc.complete as directed by the Engineer-in-charge.
Providing and fixing 18mm thick gang saw cut mirror polishe (premoulded and prepolished) machine cut for kitchen platforms, vanity countrers , window sills facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar1:4( 1 cement: 4 P. sand) with jointed treared with white cement, mixed with matching pigment, epoxy toch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour & shade , area of slab over 0.50 Sqm.
Extra for Providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete.
Providing and fixing PVC trap with gratings of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors: 100 mm PVC gratings with gullytrap.(Prince/Supreme/Finolex) .
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms. (Cera/Parryware/Neycer)
ProvidingandFixingPTMT towelrail with brackets fixed to wooden cleats with CP Brass screws with concealed ritting arrangement of approved quality and colour 600 mm long towel rail brackets with total length of 645 mm,width78mm and effective height of 88 mm ,weighing not less than 190 gms. (Cera/Parryware/Neycer)
Providing and fixing C.P. shower rose with 15 to 20 mm inlet, 100 mm dia.(Cera/ Hindware/ Parryware)
Providing and fixing ball valve (PVC) of approved quality and manufacture complete. (a) 32 mm nominal bore.(Prince/Supreme/Finolex)
Providing 40X3mm Iron hold fast 40cm long i/c fixing to frames with 10mm dia bolts, nuts and wooden plugs and embedding in cement concrete blocks of sizes 30x10x15cm of mix 1:3:6 ( 1 cement 3 M.sand 6 stone aggregate 20 mm nominal size)
Providing and fixing brass door latch with necessary screws etc complete. 250x16x5 mm
Providing anf fixing bright finished brass door stoper with rubber cusion& necessary screws
Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete :. 20 mm dia (heavy type)
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metre lead.For thickness of tiles above 10 mm and upto 25 mm
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer in charge. 1:4:8 or leaner mix
Providing and laying cement concrete 1: 4:8 ( 1 cement: 4 M.Sand: 8 granite chips ) foundation and plinth.Stone aggregate 40mm nomonal size
Centring and shuttering including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings, balconies and access platform.
Cold twisted steel reinforcement for R.C.C. work including bending, binding and placing in position complete.
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: Of area 3 sq. metre and below
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: Of area 3 sq. metre and above
Dismantling of flushing cistern of all types (C.I/PVC/Vitrious china) including stacking of useful materials near the site and disposal of unservicable materials within 50 metres lead as per direction of Engineer-in-Charge:
Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 metres lead of: Asbestos Sheet
Providing and placing on terrace at floor level) polythene water storage tankISI:12701 marked with cover and suitable locking arrangenebt and making necessary holes for inlet, outlet and over flow pipe but without fittings and the base support for tank.. (Sintex/Ocean/Aquatech) (a)500 Litre capacity
(b1000 Litre capacity
Painting Steel work with Deluxe Multi surface paintto give an even shade.Two or more coats applied on @0.90ltr/10 sqm) over under coat of primer applied @ 0.80 ltr/10 sqm of approved and manufacture
Earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 Sq.m on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete.
Providing and fixing Bright finished brass Hydraulic door closer with necessary fittings &screws .
Providing & fixing on roof pressed clay tile (Mangalor tile of 20 mm nominal thickness and of approved size and as per approved pattern wooden frame work complete (wooden frame work to be paid separately
Dismantling wood work in frames, trusses, purlins and rafters upto 10 metres span and 5 metres height including stacking the material within 50 metres lead: Of sectional area 40 square centimetres and above.
Dismantling tiled roofing with battens boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20mm thickness and of approved pattern on wooden frame work complete (wooden frame work to be paid separately)
Providing and fixing PVC pipe half round eaves gutter with M.S brackets including bolts and nuts and necessary fitting as per approved brand and manufacture etc .complete 200 mm (10kg/sqcms)
SAMEER RIYAS
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .