Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.2 LAccepted-AOC 1H SAKTHI NAGAR 46 PUDHUR KARUKKAMPALAYAM ERODE 638002 | ERODE | ERODE | TAMIL NADU | 638002 | L1 | Accepted-AOC L | |
| 2 | L2₹15.7 L+₹50,600 (3.33%)Rejected-Finance | L2 | Rejected-Finance L2 |
| Sl No | Description | Qty | Unit | JPCNAMAKKAL L2 | P&B ENTERPRISES L1 |
|---|---|---|---|---|---|
| 1.00 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum. | 5 | M3 | 115 ₹575 | 108 ₹540 Lowest |
| 2.00 | Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and Eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification | 1 | M3 | 5,645 ₹5,645 | 5,635 ₹5,635 Lowest |
| 3.00 | Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38 | 35 | M2 | 332 ₹11,620 | 327 ₹11,445 Lowest |
| 4.00 | Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification | 3 | M3 | 7,170 ₹21,510 | 7,160 ₹21,480 Lowest |
| 5.00 | Supply of & Installation 40W Decorative LED street lantern, BIS certified with a luminaire body made of spun and die cast aluminium, permanently sealed optical block (IP66) with heat sink and a clear PC protector (IK08) fitted with a VentPlug pressure equalisation unit, control gear compartment accessed from top and electrical disconnector for ease of serviceability. Suitable for vertical mounting for 76mm diameter pipe. Overall system efficiency of 115lm/W at correlated colour temperature (CCT) of 5700K, colour rendering index (CRI) >70 and L70 rated lifetime of 50,000 hours. Electrical Class I, rated voltage 240Vac, Power Factor ≥ 0.95, with BIS certified potted driver having internal surge protection of 4/4 kV and an additional surge protection device (SPD) of 10/10 kV (in both Common & Differential Modes). The OEM is required to submit test certificates, including LM79, LM80, and IS10322, from a laboratory accredited by NABL. The body colour of luminaire should be in Matte black & golden finish with a MRF marine treatment. The Decorative Column shall meet the following details: Heritage Style Column of 3.5M in height above the ground level made out of GI, tubular pole ‘T’ washed and primered (ASTM A123, with minimum average GI coating of 65μm.), having two sections, bottom section of minimum 1000mm (L) x 114mm dia and the top section with minimum of 2500mm (L) x 76mm dia, in built junction looping box at bottom section with 32 A heavy duty 4 way connector for loop in & loop out. Design comply EN40 standard and basic wind speed 169kmph. The Embellishments are cast in iron and fitted/sealed to the column at 1M height from the ground level by grubs screws. The Pole Base plate should be with 250x250x12 mm with 4 Nos. of J bolts (GI) of size 16 mm diameter x 450 mm length. The column shall also be provided with flush door at the bottom with proper strengthening to the cut-out of the door opening. The Pole Shaft/pipe should be fabricated out of Steel tube of grade YST 210/240. Poles using pre galvanised tube or hot dip galvanised through double dip process is not acceptable. The pole shaft and base plate shall be hot dip galvanized (7stage process) as per IS 2629 having minimum average DFT of 65 microns before the coating of epoxy primer. Complete pole shall be treated with high quality epoxy zinc rich primer and thereafter coated with Polyurethane paint (marine grade) of minimum average DFT of 100 microns (Total pole thickness 165 micron). The column to be painted in MRF Matte black & golden finish. The pole shall be of composite’ construction designed to ‘wind load’ corresponding to a basic wind speed of 169kmph without any deformation or damage to the structure. The Bidder is required to submit a structural test report issued by a certified structural engineer or OEM. | 32 | Each | 47,000 ₹15,04,000 | 45,450 ₹14,54,400 Lowest |
| 6.00 | Supply and laying of FRLS PVC insulated 2 core 1.5 sq.mm. Armoured Copper Cable (SOR M-0773) | 130 | Mtrs | 120 ₹15,600 | 115 ₹14,950 Lowest |
| 7.00 | Supply and laying of timer controller box for automatic on/off switch. | 1 | Nos | 9,500 ₹9,500 | 9,400 ₹9,400 Lowest |
Tender Value
₹18.2 L
EMD Value
₹18,200
Closing Date
11 Feb 2026, 6:00 pmClosed
Commissioner Vadalur municipality
Commissioner Vadalur municipality
Supply and Installation of 3.5Mtr Ornamental Beautification pole with Decorative 40W LED Luminarie in South Iyyan Eri Eastern bund and southern bund at Vadalur Municipality.
2026_MAWS_652544_1
1915/2025/E1
Open Tender
Civil Works - Others
Works
90 days
Vadalur Municipality
Please refer Tender documents.
1 document required · 1 mandatory
₹0
₹18,200
Vadalur Municipality
9 Oct 2026
7 Feb 2026
11 Feb 2026
7 Feb 2026
11 Feb 2026
7 Feb 2026
9 Feb 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum. | 5 | M3 | - | - |
| 2 | Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and Eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification | 1 | M3 | - | - |
| 3 | Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38 | 35 | M2 | - | - |
| 4 | Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification | 3 | M3 | - | - |
| 5 | Supply of & Installation 40W Decorative LED street lantern, BIS certified with a luminaire body made of spun and die cast aluminium, permanently sealed optical block (IP66) with heat sink and a clear PC protector (IK08) fitted with a VentPlug pressure equalisation unit, control gear compartment accessed from top and electrical disconnector for ease of serviceability. Suitable for vertical mounting for 76mm diameter pipe. Overall system efficiency of 115lm/W at correlated colour temperature (CCT) of 5700K, colour rendering index (CRI) >70 and L70 rated lifetime of 50,000 hours. Electrical Class I, rated voltage 240Vac, Power Factor ≥ 0.95, with BIS certified potted driver having internal surge protection of 4/4 kV and an additional surge protection device (SPD) of 10/10 kV (in both Common & Differential Modes). The OEM is required to submit test certificates, including LM79, LM80, and IS10322, from a laboratory accredited by NABL. The body colour of luminaire should be in Matte black & golden finish with a MRF marine treatment. The Decorative Column shall meet the following details: Heritage Style Column of 3.5M in height above the ground level made out of GI, tubular pole ‘T’ washed and primered (ASTM A123, with minimum average GI coating of 65μm.), having two sections, bottom section of minimum 1000mm (L) x 114mm dia and the top section with minimum of 2500mm (L) x 76mm dia, in built junction looping box at bottom section with 32 A heavy duty 4 way connector for loop in & loop out. Design comply EN40 standard and basic wind speed 169kmph. The Embellishments are cast in iron and fitted/sealed to the column at 1M height from the ground level by grubs screws. The Pole Base plate should be with 250x250x12 mm with 4 Nos. of J bolts (GI) of size 16 mm diameter x 450 mm length. The column shall also be provided with flush door at the bottom with proper strengthening to the cut-out of the door opening. The Pole Shaft/pipe should be fabricated out of Steel tube of grade YST 210/240. Poles using pre galvanised tube or hot dip galvanised through double dip process is not acceptable. The pole shaft and base plate shall be hot dip galvanized (7stage process) as per IS 2629 having minimum average DFT of 65 microns before the coating of epoxy primer. Complete pole shall be treated with high quality epoxy zinc rich primer and thereafter coated with Polyurethane paint (marine grade) of minimum average DFT of 100 microns (Total pole thickness 165 micron). The column to be painted in MRF Matte black & golden finish. The pole shall be of composite’ construction designed to ‘wind load’ corresponding to a basic wind speed of 169kmph without any deformation or damage to the structure. The Bidder is required to submit a structural test report issued by a certified structural engineer or OEM. | 32 | Each | - | - |
| 6 | Supply and laying of FRLS PVC insulated 2 core 1.5 sq.mm. Armoured Copper Cable (SOR M-0773) | 130 | Mtrs | - | - |
| 7 | Supply and laying of timer controller box for automatic on/off switch. | 1 | Nos | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.52 MB
BOQ_782429.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .