SITC of 7.5 HP Electrically Operated Boosting Pump Set at IRBn Complex

Amount

1. SITC of Electric Pump & its Accessories SITC of 7.5 HP Kirloskar Make KDS 822++ Monoblock Electric Pump Set having 100mm x 100mm suction and delivery, head 12 to 24m, discharge 27 to 15 Ltrs/ Sec along with its Base frame, mounting bolts and nuts including base frame grouting Bolt and Nuts as required

SITC of 7.5 HP Three Phase DOL Starter for Electric Motor including connection etc., as required

Supplying and fixing of 4 Way 63A, 415 V three phase Bus Bar Chamber including connection etc., as required

Supplying and fixing of 100A Cut out (RYB) with Neutral Link 415V, 50 Hz including connections etc., as required

Supplying and fixing of 04 Way SPN DB Double Door along with 1 No. 16A FP MCB including connection etc., as required.

Supplying and fixing Bakelite Batten/ angle holder including connection etc., as required.

Supplying of 0.5 Watt LED Lamp in the existing Batten Holder similar to C&S Cat No. LTHPLEDLAMP0.5WB22R/Y/B as required (1 No. each colour of Red, Yellow, Blue for phase indication)

Supplying of 12Watt LED Lamp in the existing Batten Holder similar to C&S Cat No. LTHPLEDLAMP12WB22 as required.

Providing and fixing of Electrical switch board size 1.20 mtr x 0.80 Mtr made up of 20 mm x 20 mm x 5 mm MS equal angle on the outer Edge and 2 lengths of 20mm x 5mm MS flat welded back for strengthening the structure horizontally and vertically over width and height to form groove and fixing of 1.20 mtr x 0.80 mtr 12 mm marine ply along with 2 Nos 3 mm thick phenolithic board (hylem sheet of same size sandwiched one at the bottom and one on the top of ply suitable screwed with self threaded metal screw on the metal frame to form regid electrical board as required. (as per the diagram).

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.. a) 6 x 4 Sq.mm

II. Wiring of Pump House Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. a) Group C

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

b) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Supplying and fixing of surface mounted LED Batten Fitting for 20 Watt T-8 Lamp similar to Crompton Cat No. DMLN1LT8-16 with 20W Retro fit LED Lamp Crompton Cat No. LT8-20-865-2 or its equivalent

Supplying and fixing Plastic Board of 3.5" x 6" on surface including providing and fixing 5 Pin 5/6 (2&3 Pin) amps socket outlet and 5/6 A, P.T Switch connection painting etc., as required.

Supplying and fixing Plastic Board of 3.5" x 8" on surface including providing and fixing 6 Pin 6/16 amps socket outlet and 16 A, P.T Switch connection painting etc., as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a) 6 way , Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) Single Pole

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) 40 amps

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. a) 20 mm

Providing earthing with safe earthing electrode of galvanization 80 to 100 microns, length 2 mtr, outer dia 50 mm, inner dia 19 mm and inner space be filled with crystalline conductive mixture including filling -up with electrolite (Back fill compound) as required for safe earth electrode and providing masonary enclosure with cover plate having locking arrangement etc. as required. (Ashlok)

Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.

Supplying of following sizes of XLPE insulated Heavy duty armoured aluminium conductor UG Cable of 1.1 KG Grade conforming to IS: 7098 (part-I) and IS No. 1554 (part-I) 1988 as applicable Make: CCI/ GLOSTER/ Havells/ Polycab/ Finolex. a) 25.0 Sq.mm x 3.5 Core

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. a) Upto 35 sq. mm

Supplying of following and Laying of One Number Double Walled Corrugated High Density poly thylene pipe having corrugation on the outer wall and plain surface inner wall conforming to IS No. 14930 Part I & II complete with necessary HDPE filling for protection of 1.1 KV grade directly in ground at the depth of 50 cm i/c excavation and refilling the trench etc., as required. a) 50 mm outer dia and 38 mm inner dia

Supplying of following and Laying of One Number Double Walled Corrugated High Density poly thylene pipe having corrugation on the outer wall and plain surface inner wall conforming to IS No. 14930 Part I & II complete with necessary HDPE filling for protection of 1.1 KV grade directly in surface / ground as required. a) 50 mm outer dia and 38 mm inner dia