Renovation and Up-gradation of Paediatric OPD, Wards, SNCU under MusQan at Gauhati Medical College Hospital Complex, Guwahati-32

Amount

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.15.7.4: In cement mortar

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :15.12.1: Of area beyond 3 sq. metres and below

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :15.12.1: Of area beyond 3 sq. metres and below

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.15.23.1: For thickness of tiles 10 mm to 25 mm

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.6.13.1: Cement mortar 1:3 (1 cement :3 coarse sand)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.15.22.6: Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for :5.9.21: Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :5.2.2: 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size de rived from natural sources)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).9.1.1: Sal wood

15 mm cement plaster on the rough side of single or half brick wall of mix : 13.2.1: 1:4 (1 cement: 4 fine sand)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :4.1.5: 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size derived from natural sources))

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :9.74.1: 250x 10mm

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :9.96.1: 300 x16mm

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.11.41.A3: Glazed Vitrified tiles Matt/Antiskid finish of size 11.41.A.3.1: Size of Tile 600 x 600 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providing and fixing auto closing hinges shall be paid separately)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :21.1.2: For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.3: Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)

21.1.1: For fixed portion 21.1.1.3: Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):21.3.2: With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm)

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge.Pre-laminated particle board with decorative lamination on both sides

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :9.7.7: Float glass panes 9.7.7.1: 4 mm thick glass pane (weight not less than 10 kg per sqm)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :13.43.1: Water thinnable cement primer

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :13.60.1: Two or more coats on new work

Providing, fitting and fixing of Junior Series (PONCHO EWC) Italian collection size: 50x39x26 cm, Cat No.20062 completed as directed and specified. Make :HINDWARE

Providing, fitting and fixing of Junior Series (PONCHO WASHBASIN) Italian collection size: 56x37x50 cm, Cat No.10077 completed as directed and specified. Make :HINDWARE

Premium quality wall art painting for children at paediatric ward 2nd flooir, GMCH of approved brand and manufacture complete as directed and specified.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:17.7.11: Stainless Steel AISI-304(18/8) Wash basin 530x345 mm with single 15 mm C.P. brass pillar tap

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.17.73.2: 600 mm long towel rail with total length of 64

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required :17.11.2: Size 600x450x200 mm

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :17.32.1: Circular shape 450 mm dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.External work 18.9.1: 15 mm nominal dia Pipes

18.9.3: 25 mm nominal dia pipes

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 1.14.1: 12X 1.5 sq. mm+ 1X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2X4 sq. mm + X4 sq. mm earth wire

2X6 sq. mm + 1x6 sq. mm earth wire

Supplying and fixing following nodular switclh sockct on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 1.24.1: 5/6 amps switch

15/16 amp switch

3 pin 5/6 amp socket outlet

6 pin 15/16 amp socket outlet

Bell push

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required

Supplying and fixing following size/ modules, PVC box alongh with modular base & cover plate for modular switches in recess etc. as required (a) 3 Module (117mm x89mm)

b) 6 Module (214 mmx 89mm)

c) 8 Module (145mm x145 mm)

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.2.10.1: Single pole

2.10.2: Single pole and neutral

|Supplying fitting fixing offollowing 4P 240-440V 'C Series 10ka MCB in the existing DB/panel as |specified and directed by the department. (Havells or equivelent make) 63A 4P 240-440V 'C' Series 10ka MCB

Supplying with fitting fixing of surface & wall mounted LED luminaries complete with all accessories including driver directly on wall / lceiling including connection with 1.5 sq mmP.V.C. insulated S.C.copper conductor as required and directed by the department.BAJAJ/ Havells or(Crompton/PHILIPS/ equivalent considering the mother items rate 18W 4ft LEDBatten

Supplying with fitting fixing of Reessed mounted |LED luminaries complete with all accessories |including driver directly on false ceiling including cutting ceiling & connection with 1.5 sq mm |P.V.C. insulated S.C.copper conductor as required 18W 300mmX300mmLED Recessed fitting

Spplying includinp ittinp and fixing of 1PhLLDVoluneter C 0.5 in the existinp b0x as specifiedad directed by the deptt

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 2.3.2: 2 + 6 way, Double door

Supply with insallation & commissioning of readymade maintenance free CPRI approvedchemical carthing systen with 100 MM dia. 2.9 Metres length corrossion free centrifugally CastIron Larthing Electrode complete with Reslow/BFC Grounding chemical compound( 40 KG) and Advance Earth Pit cover (Cl) of size 300mmx 300 mm including excavation of earth pit and construction brick earth chamber including plastering both inner & outer surface of brick wall C69as specifiedand directed by the dept.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Supply. installation. Testing & Commiss- ioning of |& Nurse Call Bell System User Display System |Display-call station having numeric display. facility to acknowledge, buzzer etc. complete as per specification. Made of PVC Plastic White Colour.Digital Numeric display in red colour 7 segments.|Audio Alert-Soft Ding Dong BellOn Every Push Of Ja Call Button. Display have provision for displaying multiple call / ali! the call request at the same time. |Receiving end Panel/Console produce buzzer sound audio- alert soft ding dong on pressing Remote calling device.|Panel/Consolesourced bv 230V.SMPS (Switch Mode power supply) Inbuilt 220/5v (ibnbuilt) MAKE: SUPREME INTERNATIONAL including GST (A) 50 USERS Disply System

B) 18 USERS Disply System

Supply. installation. Testing & Commissioning of &Call Bel! Remote/ BED SIDE UNIT - Wall mounted|Modules comprising of attendant -Call function andreset function call status indicators withRED colour LED lamps (Wall mounted unit).Size ITEM DESCRIPTION MAKE: SUPREME INTERNATIONAL. Including

upplying and drawing of UTP 4 pair CAT6 LAN Cable in the existing surfacel recessed steel/ PVC conduit as required 1 run of cable

2 run of cabl

3 run of cabl

Supplying and fixing of following sizes of mediun class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 1.21.1: 20 mm

Sri Bhaben Bora

SARAT CH. MEDHI