Re-organization of 220V, 1 phase, 2 wire overhead street light at Dhori (K) dhowrah under Dhori (K) colliery, Dhori Area CCL.

Amount

Supply & providing cement pole.

Transporting of pole from manufacturer to store & store to site.

Erection of RCC/PCC pole of following length in brick ballast and ramming the foundation, finishing with 150 mm thick cement concrete (1:3:6) layer on top with including excavation and re-filling etc. as required. : Above 8.0 meter and up to 11.0 meter

Supplying of channel iron 75 mm x 40 mm x 6 mm (7.14 kg per meter) cross arm for 2 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with and finished paint as required.

Supplying of channel iron 75 mm x 40 mm x 6 mm (7.14 kg per meter) cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required.

Supplying and erection of 100 mm x 110 mm shackle insulator with G.I. bolts, nuts and straps etc. as required.

Supplying and erection of 100 mm x 80 mm pin insulator complete with G.I. spindle and nuts etc. as required.

G.I. wire 8 SWG (+) Erection of G.I. wire no. 8 SWG including binding etc. as required.

Nuts & bolts of different sizes with washers.

Erection of AAA conductor of 7/3.35mm to 7/4.00 diameter and above including binding etc. as required. 7 x 2 x 40 x 0.214

Supply & providing of clamps.

Erection of angle iron/ channel iron cross arm on wood/RCC/PCC/ steel tubular/ rail pole etc. as required.

Supply & providing of street light 48 wt. LED x 230 volt.

Fitting & fixing of light set at top of the pole.

Supplying and fixing of 32mm dia x 2.00 meters long G.I. pipe (medium class) bracket for mounting of fluorescent/HPMV/HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos. 40mm x 3mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.

Supplying and drawing following sizes FRLS PVC insulated copper conductor, single core cable in existing surface/ recessed steel/ PVC conduit as required. : 2 x 2.5 sq.mm 2.5 mtr. X 7 = 17.5 mtr.

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 63 Amp TP&N.

Supplying and erection of stay set complete (galvanized) with 19/20 mm dia x 1.8 meters long stay rod, anchor plate of size 45 cm x 45 cm x 7.5 mm, thimble, stay clamps, turn buckle (20 mm x 60 cm), 7/3.15 mm dia G.I. stay wire and strain wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

Clamps/stand for fabrication with angle

Labour cost for fixing of main switch.

Erection of cradle guard as required.

Total impact of GST for the purpose of CTC

CHAITALI ENTERPRISES

M/s Jai Hanuman Enterprises