Upgradation/Renovation of Divisional Workshop and Regional Workshop of ED Anantnag by way of Construction of Access Path Between Regional Workshop Anantnag and Divisional Workshop.(PDDSS2526100292)

Amount

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer in-charge in cement mortar.

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift up to 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed.

Providing and laying hand packed stone soling in foundation, under floors etc. including ramming watering consolidation complete, cost and carriage of all materials involved up to site of work complete.

Providing and laying in position cement concrete of specified grade M 7.5 including curing but excluding the cost of centring and shuttering. All work at all levels in 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) including cost and carriage of all materials involved up to site of work complete.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of cantering, shuttering, finishing and reinforcement. All works up to plinth level 1:1½:3 (1 cement: 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including cost and carriage of all materials involved up to site of work complete

Reinforcement of RCC work including straightening, cutting, bending and placing including all carriages complete job.

Cantering and shuttering including strutting, propping etc. and removal of form work for suspended slab/counters.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing precoated galvalume profile sheets 0.50 mm TCT having a crest height of 28-32 mm at 195 mm pitch and effective width of 975-1000 mm and length to suit site requirement to the purlins using self-drilling and self-tapping fasteners of reputed make with purlin sheet using self-drilling and self-tapping fasteners and fixing flashing , valleys and ridges of colour coated galvalume plain sheet using self- drilling and self - tapping fasteners of reputed make complete and as directed. The contractor shall give a minimum of 10 years guarantee for sheets against deterioration, disintegrations loss of lustre, variation in colour, etc. and leakages across laps, fasters etc. All types of steels sheets shall be load tested to satisfy 1.10 times the design wind load and coating thickness to the satisfaction of the Engineer in- charge. Fasteners shall be also be tested. The contractor is to submit design and shop drawings for approval on the sheet profile, design and fabrication details before installation (including cost of all material, leads, lifts and carriages etc up to site of work complete)

Earth work in excavation by mechanical means ( hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. ( not exceeding 1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift up to 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: all kinds of soil:

Providing and laying dry stone soling duly hand packed and consolidated with hand rammers inc. all carriage complete job.

Providing and laying in position cement concrete of specified grade M- 7.5g excluding the cost of cantering and shuttering – all work at all levels in: 1:4:8 (1 cement: 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including cost and carriage of all materials involved up to site of work complete.

Providing and fixing of 12mm thick Tand G planks made of imported wood (New Zealand pine or equivalent) for roof soffits and ceiling on wood work in false ceiling, partitions sawn and put up in position in budloo wood (ceiling joists). Including cost of necessary adhesive and cost of nails etc. With necessary cornice of required size complete job. including cost of nails/ screws all complete as approved by Engineer in charge (including cost of all materials, leads, lifts and carriages etc up to site of work complete).

YASIR ALTAF VAID (BID ID -2573423)

RIYAZ AHMAD BHAT (BID ID -2569220)