REPAIR/REPLACEMENT OF HARD STANDING, PATH PAVEMENT, CULVERT, DRAIN IN MD ACCN AND OTM ACCN UNDER AGE B/R-I AT ITARANA CANTT, ALWAR

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving n.exc 15cm thick (below or above ground level) complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving exc 15cm thick (below or above ground level) complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness as in floors, pavings, aprons,pillars,coloumns,slabs, pathway etc laid dry or laid dry and pointed complete all as specified & directed.

Dismantling of cement concrete (unreinforced) kerb stone and the like of any description of and in any position not otherwise specifically provided for complete all as specified and directed

M&L 75mm thick PCC (1:4:8), Type D-2 (using 40mm graded stone aggregate) as in sub base of path/ hard standing complete all as specified & directed.

M&L 60mm thick machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS-15658-2006, M-35 Grade and laid over with and including 25 mm thick compacted sand complete all as specified and directed.

M&L 60mm thick machine pressed precast concrete rubberised moulded colourful interlocking paver block with grey cement and no pigment any shape and size conforming to IS-15658-2006, M-35 Grade and laid over with and including 25 mm thick compacted sand complete all as specified and directed.

M&L old retreived serviceable tiles obtained from demolition/dismantling, 60mm thick machine pressed precast concrete rubberised moulded colourful interlocking paver block with grey cement and no pigment any shape and size conforming to IS-15658-2006, M-35 Grade and laid over with and including 25 mm thick compacted sand complete all as specified and directed.

M&L 80mm thick machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS-15658-2006, M-40 Grade and laid over with and including 25 mm thick compacted sand complete all as specified and directed.

M&L 80mm thick machine pressed precast concrete interlocking paver block with grey cement and no pigment any shape and size conforming to IS-15658-2006, M-40 Grade and laid over with and including 25 mm thick compacted sand complete all as specified and directed.

M&L hard core of broken stone or boulders of gauge n.exc. 63mm deposited spread and levelled in layers n.exc. 15 cm thick watered and rolled/ rammed to a true surface complete all as specified and directed.

M&L precast cement concrete solid block factory made as in kerb stone in PCC (1:2:4), Type B-1 (using 20mm graded crushed stone aggregate) set in CM (1:6) complete all as specified and directed.

M&L old retreived serviceable precast cement concrete solid block factory made as in kerb stone in PCC (1:2:4), Type B-1 (using 20mm graded crushed stone aggregate) set in CM (1:6) complete all as specified and directed.

M & L for 75mm thick cement concrete (1:3:6) type C1 (using 20 mm thick graded stone aggregate) as in plinth protection laid in alternate bays n.exc 2.5m length finished even & smooth and joint to be filled with bituminous mastic filling including necessary form work complete all as specified and directed.

M&L 75 mm thick PCC(1:3:6), Type C2 (using 40mm graded stone aggregate ) as in sub base of floors complete all as specified & directed.

M&L coloured rubberised moulded cement concrete tiles 300mmx300mmx22-25mm thick, set, jointed and pointed with neat cement slurry as in pavings laid over with and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L coloured chequered cement concrete tiles 200mmx200mmx22-25mm thick, set, jointed and pointed with neat cement slurry as in pavings laid over with and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key, scrubbing down with water etc all as directed.

M&L rendering 15mm thick in CM (1:4) on brick/stone wall surfaces or other than fair faces of brick work & surfaces, finished even and smooth without using extra cement with water proof compound. Note :- Water proofing compound shall be measured and paid separately here-in-after.

M&L rough cast plaster on exterior walls applying the under coat of cement and sand mortar (1:3) not less than 10mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (size between 6 to 12mm ) mixed with coarse sand and cement in the raio of 1:1:1 shall be applied and finished even. The mix of cement and sand shall made slightly wetter than normal for rendering to ensure that larger aggregate are thoroughly covered complete all as specified and directed

Preparing newly plastered surfaces of walls & applying two coats of cement base paint of approved shade/tint complete all as specified and directed.

Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonry and removal complete all as specified & directed

M&L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L walling of random rubble, uncoursed, well bonded, bedded and solidly hearted stone masonry built in cement mortar 1:4 complete all as specified & as directed.

Extra over stone walling for hammer dressed to face stones and dressing of face beds and joints as specified for random rubble masonry uncoursed or brought to course with maximum depression on face from straight edge held against the depressed surface on lime or sand stone not exc 20mm for rock faced complete all as specified and directed.

M&L PCC (1:3:6), Type C2 (using 20 mm graded crushed stone aggregate) as in surface channels and drains and benching including finishing the top of benching even and smooth using extra cement complete all as specified and directed.

M&L PCC (1:2:4), Type B1 (using 20 mm graded crushed stone aggregate) as in surface channels and drains and benching including finishing the top of benching even and smooth using extra cement complete all as specified and directed.

Extra for forming fair finished drain or channel exc 30cm inner girth in cement concrete using extra cement including forms moulds mitred/stopped ends etc.

M&L PCC (1:2:4), Type B1 (using 20mm graded stone aggragate) as in bed blocks, bed plates, coping etc including weathering slightly rounded or chamfered angles and throating making groves for fixing of manhole cover including necessary form work.

M&L PCC (1:2:4), Type B1 (using 20mm graded stone aggragate) set in cement mortar (1:6) as in coping of brock masonry wall kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling) corbels, brackets etc including weathering slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

Supply only glass dividing strips 3 mm thick and 38 mm width

M&L PCC 75mm thick (1:2:4) type B-2 (using 40mm graded stone aggregate) as in pathways/hardstanding laid in alternate ways, each panel not exceeding 3.00 Sqm finished the surface even and fair without using extra cement complete all as specified & directed.

M&L 20 mm thick Granite (of any type) tiles, machine cut, bedding and jointing with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing with and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed

M&L 20 mm thick Granite (of any type) tiles, machine cut, as in skirting/dado laid over cement screed and jointing with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing with and including 10mm thick rendering in CM (1:4) for recieving stone etccomplete all as specified and as directed

M&L PCC (1:2:4), Type B0 (using 12.5mm graded stone aggragate) as in 25mm thick (measured solid) louvers and jallies including moulding but excluding frame, set in cement mortar (1:4) complete all as specified and directed.

Demolition of reinforcement cement Concrete as in cover/ slabs of manhole/ septic tank/ soakage well of any description and in any position (reinforcement cut as required to facilitte demolition) all as specified and as directed.

S&F 75mm thick steel fibre reinforced (SFRC) man hole cover with iron frames (medium) complying to the standard specifications as mentioned in the IS 12592 BIS Standard minimum load bearing capacity 5 ton/Sqm in square, rectangular or circular shape complete all as specified & as directed.

Demolition and breaking up 300 to 450 mm bore drain pipes, salt glazed stone ware/RCC pipes set in cement mortar including PCC haunching and bedding, complete.

M&L 450mm bore reinforced concrete pipe, class NP2, laid and jointed in CM (1:1) complete with collars all as specified & as directed.

M&L 300mm bore reinforced concrete pipe, class NP2, laid and jointed in CM (1:1) complete with collars all as specified & as directed.

M&L PCC (1:4:8), Type D-2, (using 40mm graded crushed stone aggregate) as in bedding to SGSW/NP2 drain pipes, including packing under and haunching against the sides of pipes after they are laid and tested complete for 300 to 450 mm bore pipe all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed.

Preparation of new surfaces of kerb stone of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as directed

Preparation of old surfaces of kerb stone of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as directed

Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed

Dismantling posts, purlins, or any part of truss, struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground or wall to match with the existing finishes complete all as specified and directed.

Dismantling asbestos cement corrugated or semicorrugated as in roof covering/wall cladding.

M&L Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, and eves board fixed with self tapping screws complet all as specified and directed.

M&L Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, and eves board fixed with self tapping screws complet all as specified and directed.

S&F steel work in tubular section for purlin/rafters etc including special shaped washer etc. complete using induction butt welded tubes conforming to I.S. 1161-1998 grade St- 240.

Dismantling fencing wire mesh, any type complete all as specified and directed.

Excavating in post holes (or similar) each n.exc. 0.50 cum, getting out, returning, filling in and well ramming with earth or broken boulders mixed with earth around in layers n.exc 25cm in soft/loose soil complete all as specified and directed.

M&L PCC (1:3:6), Type C2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete for post holes and the likes; complete all as specified and directed.

S&F mild steel joist angle channel or tee sections and fix independently in concrete as fencing posts and similar work confirming to Fe-410 or Fe-310-0 complete all as specified and directed.

Supply only mild steel bolt purpose made with hexagonal or square head one end screwed and headed or both ends screwed to be fitted with washers and one hexagonal or square nuts exceeding 50mm and n.exc 75mm long dia of the sand 16 mm.

Fixing only chain link fencing with and including line wire any mesh size and type of standard rails, straining with round bars of appropriate dia, fixing with bolts and winding wires etc complete all as specified and directed. Note :- Chain link fence of approved mesh, round bars for straining the wooling chain link and nuts/bolts etc shall be measured and paid as 'SUPPLY ONLY' under relevent items of this BOQ.

Supply only MS galvanized chain link fence of approved mesh and diameter of wire complete all as specified and directed.

Supply only MS round bar of 10mm dia and over cut to length bent to shape required including cranking bending hooking ends complete all as specified and directed.

Preparation of new steel surfaces of any description n.exc. 10 cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed

S&F in repair galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2 mm barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc (Each line wire to be measured) complete all as specified & directed.

S&F in repair expanded metal, cut to length, bent to shape required & tying with & including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied & fixed complete to wood or steel members weight n.exc 4.00 Kg /Sqm complete all as specified and directed.

S&F in repair expanded metal, cut to length, bent to shape required & tying with & including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied & fixed complete to wood or steel members weight exc 4.00 Kg /Sqm complete all as specified and directed.

M/s Laxmi Enterprises (BID ID -3120784)

ARUN ENTERPRISES (BID ID -3131482)

J.J.ENGINEERING (BID ID -3121786)

shiva construction (BID ID -3118450)

GAR CONSTRUCTIONS (BID ID -3122141)

RAMJI LAL & SONS (BID ID -3109409)

M/S HARI CONSTRUCTION (BID ID -3122100)

M/s ASK Enterprises (BID ID -3131252)

Radha Enterprises (BID ID -3120579)

ALAKNANDA ENTERPRISES (BID ID -3121380)

Ex Serviceman Enterprises (BID ID -3121864)

R V CONSTRUCTION (BID ID -3130963)

Hitesh Construction (BID ID -3122269)

M/s S Amarjit Singh (BID ID -3120321)