REPAIR REPLACEMENT OF INTERNAL WIRING SUB MAIN WIRING INCLUDING REPLACEMENT OF FITTING FIXTURES IN ANTE ROOM BANQUET HALL GYM RECEPTION AND CERTAIN GUEST HOUSES IN WAC AT SUBROTO PARK UNDER GE AF SUBROTO PARK

Amount

Taking down carefully the existing point wiring of any size/capacity and type by disconnecting from the terminals complete including fittings and fixtures such as switches, sockets,ceiling rose, regulators and light fittings etc by unscrewing and removing from site complete all as specified and directed by engg-in-charge. Note :cost of unserviceable materials will be charged from the contractor against schedule of credit.

M & L for point wiring with 1.5 sqmm (Nominal Area)PVC insulated un sheathed multi stranded copper conductor,FRLS 1100 Volts grade, with non metalic rigid PVC medium grade duty conduit/casing capping on wall/roof for surfacing wiring but not less than 20mm dia with accessories such as junction boxes, bends, tees etc. of suitable size including sunk cast iron or pressed steel terminal box for mounting switches, sockets fan regulators etc with 3 mm thick plastic laminated sheet top cover Make : Hylem / Anchor including continuous earth wire PVC insulated 1.50 Sq mm multi stranded copper conductor, FRLS 1100 Volts grade, connecting to common earth and earth dolly complete all as specified for One light /bell/fan point controlled by one 1 way switch

All as per Item No 2 herien before but One three pin switch socket 5 Amps plug point on independent board complete all as specified & directed by Engineer-in-Charge

All as per Item No 2 herien before but One three pin switch socket 5 Amps plug point on same board complete all as specified & directed by Engineer-in-Charge

All as per Item No 2 herien before but One bell/buzzer point controlled by one bell push on independent board complete all as specified & directed by Engineer-in-Charge

All as per Item No 2 herien before but One light point controlled by two 2-way switches, with cables 1.5 sq. mm size including continuous earth wire PVC insulated 1.5 Sqmm single core multi stranded copper conductor connected to common earth dolly complete all as specified and as directed by Engr-in-Charge.

All as per item No 2 herein before but point wiring with 2.5 Sqmm single core multi stranded copper conductor for one three pin socket 15 Amps on independant board controlled by one 15 Amps Switch including continuous earth wire PVC insulated 2.5 Sqmm single core multi stranded copper conductor connected to common earth dolly complete all as specified and as directed by Engr-in-Charge.

M&L for point wiring with 1.5 sqmm, single core, PVC insulated and PVC sheathed FRLS cable, 1100 volts grade IS-694 marked, with multi strandad copper conductors and earth continuity wire with similar 1.5 sqmm cable (incl connecting to earth dolly) concealed in wall including PVC conduit size of not less than 20mm and fittings/accessories all fixed to the surface of walls/ceiling, and also incl sunk type pressed steel terminal box and 3 mm thick plastic laminated sheet top covers for the following :- (Note : Cost of for cutting chesing and making good to disturbed surface all as to match with existing surface are deemed to be included in quoted rate.) One light /bell/fan point controlled by one 1 way switch

All as per item No 8 herein before but One socket out let 5 Amps 5 pin on independent board complete all as specified and directed by Engineer-in-Charge

All as per item No 8 herein before but One socket outlet 5 Amps 5 Pin on same board with other switches complete all as specified and as directed by Engr-in-Charge.

All as per item No 8 herein before but One bell/buzzer point controlled by one bell push on independent board complete all as specified and as directed by Engineer-in-Charge

All as per item No 8 herein before but point wiring with 2.5 Sqmm single core multi stranded copper conductor for one three pin socket 15 Amps on independant board controlled by one 15 Amps Switch including continuous earth wire PVC insulated 2.5 Sqmm single core multi stranded copper conductor connected to common earth dolly complete all as specified and as directed by Engr-in-Charge.

Supply and fix in replacement Switch Piano, Flush Button, Single Pole, One Way, 6 Amps, 230 Volts complete all as specified and as directed. Make: Havells/ Anchor/Cona

S&F in replacement of switch piano, flush type, 15 amps, single pole, one way suitable for 240V AC Complete all as specified and directed by Engineer-in-Charge. Make: Havells/ Anchor/Cona

S&F in replacement of socket outlet 2in1, 3 pin 5 Amps flush type suitable for 240V AC Complete all as specified and directed by Engineer-in-Charge. Make: Havells/ Anchor/Cona

S&F in replacement of socket outlet 2in1, 3 pin 15/5 Amps flush type suitable for 240V AC Complete all as specified and directed by Engineer-in-Charge. Make: Havells/ Anchor/Cona

Supply and fix in replacement ceiling rose surface type bakelite 65 x 50 mm with three terminals with ISI mark. MAKE:-ANCHAR,LISHA,Havells

Supply and fix in replacement lamp holder PVC/Poly Carbonate type suitable for batten fittings with ISI mark complete all as specified and as directed by the Engineer in Charge. MAKE:-ANCHAR,LISHA,Havells

S&F in replacement Bell push flush type 5 Amps complete all as specified and as directed by the Engineer in Charge. MAKE:-ANCHAR,LISHA,Havells

S&F modular white cover plate with frame 12 module complete. Make :-Crabtree/Anchor/ Legrand

S&F flush mounting boxes 12 modular complete. Make :- Crabtree/Anchor/Legrand

S&F modular white cover plate with frame 8 module complete. Make :- Crabtree/Anchor/Legrand

S&F flush mounting boxes 8 modular complete. Make :- Legrand /Crabtree/Anchor

S&F modular white cover plate with frame 6 module complete. Make :- Legrand/Crabtree/Anchor

S&F metal flush mounting boxes 6 modular complete. Make :- Legrand/Crabtree/Anchor

S&F modular white cover plate with frame 4 module complete. Make :- Legrand /Crabtree/Anchor

S&F metal flush mounting boxes 4 modular complete. Make :- Legrand /Crabtree/Anchor

S&F modular white cover plate with frame 3 module complete. Make :- Legrand /Crabtree/Anchor

S&F metal flush mounting boxes 3 modular complete. Make :- Legrand /Crabtree/Anchor

S&F modular white cover plate with frame 1 module complete. Make :- Legrand /Crabtree/Anchor

S&F in replacement modular Switch, 5/6 Amps , 1 module,complete all as specified and directed. Make :Crabtree/Anchor/Legrand

S&F in replacement modular Switch, 5/6 Amps , 1 module,two way complete all as specified and directed. Make : Crabtree/Anchor/Legrand

S&F in replacement modular socket outlet , 6 Amp, 2/3 pin combined, 2 module complete all as specified and directed. Make :Crabtree/Anchor/Legrand

S&F in replacement modular Switch, 16 Amps, 1 module,complete all as specified and directed. Make : Crabtree/Legrand/Havells

S&F in replacement modular socket outlet , 6/16 Amp, 2/3 pin combined, 2 module complete all as specified and directed. Make Crabtree/Legrand/Havells

Supply & fix in replacement Modular socket point incuding SP, MCB metal clad socket single pole and neutral sheet metal enclosure with and 20A earth plug and socket complete with one single pole MCB 20 amp 240 Volts all as specified and directed. Make : Leagrand / Havells / Anchor / L&T.

S&F in replacement modular fan regulator ,120 W, 2 module complete all as specified and directed. Make : Crabtree/Legrand/Havells

Supply and fixing decorative downlighter UFO Round POP/CEILING mounting LED made of PDC AL with high efficient LEDs & Glare free opal diffuser 24 watt, 3000 K ,230 volt, LED ceiling fitting, complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer-In- Charge. Make: Halonix/Philips/Havells.

Supply and fixing decorative downlighter Round POP/CEILING mounting LED made of PDC AL with high efficient LEDs & Glare free opal diffuser 5 watt, 3000 K ,230 volt, LED ceiling fitting, complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer-In- Charge. Make: Halonix/Philips/Havells.

S&F in replacement steped type electronic fan regulator heavy duty flush type socket size on th existing phenolic laminated sheet complete Make:-ANCHAR,LISHA,Havells

S&F in replacement of call bell, Ding dong type, suitable for 240V AC Complete all as specified and directed by Engineer-in-Charge. Make : ANCHAR,LISHA,Havells

Supply and fixing wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver ,20 watt LED fitting with 100 lumen/watt, 3000/6000K , 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer- In- Charge. Make: Halonix Cat No -HLB-03-20-CW-AL/Philips/Crompton

Supply and fixing wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver ,10 watt LED fitting with 100 lumen/watt, 6000K , 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, fixed on two PVC round blocks and testing complete all as specified and directed by the Engineer-In- Charge. Make: Halonix Cat No -HLB-03-10-CW-AL / Philips/Crompton.

Supply and fixing Recessed mounted squre LED downlighter with PDC aluminium body and high transmittance diffuser 24 watt, 5700 K ,230 volt, LED ceiling fitting, complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer-In- Charge. Make: Havells/Bajaj/wipro.

Supply and fixing wall mounted LED bulk head fittings, 10 watt, 2700/6000K,, 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer-In- Charge. Make: Halonix Cat No- HLBH-02-10-CW/Philips/Crompton Greaves.

Supply and fixing LED Panel lights - Quadra Series , 36 watt, 6000K,, 230 Volts, complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer-In- Charge. Make: Havells/Crompton Greaves/ polycab.

S&F in replacement fan capacitor 2.5 Mfd Make :- Epcos/Usha/Asian/Havells

S&F in replacement fan capacitor 3.15 Mfd Make :- Epcos/Usha/Asian/Havells

Supply & fix in replacement Modular 16/25 Amps socket complete with one single pole MCB 20/32 amp 240 Volts all as specified and directed. Make : Crabtee/Leagrand / Havells

M & L in replacement sheet metal enclosure with double door category of protection type IP-42 factory made with tinned copper 200 Amps rated bus bar suitable for MCB SPN 240 Volts, 2 way concealed in wall such as front cover shall be seen flush with the wall surface all as specified and directed. Make : Havells/L&T/Legrand

All as per item No 50 herein before but 4 way

All as per item No 50 herein before but 8 way

All as per item No 50 herein before but 12 way

M & L in replacement sheet metal enclosure with double door category of protection type IP-42 factory made with tinned copper 200 Amps rated bus bar suitable for MCB TPN 415 Volts, 4 way concealed in wall such as front cover shall be seen flush with the wall surface all as specified and directed. Make : Havells/L&T/Legrand

All as per item No 54 herein before but 8 way

All as per item No 54 herein before but 12 way

S&F in repairs MCB Triple pole and neutral 63/100 Amps working on 415 volts 50 Hz AC supply,10 KA C series. Make : Havells/L&T/C&S/Legrand

S&F in repairs MCB single pole and neutral 32/40 Amps working on 240 volts 50 Hz AC supply,10 KA C series including taking out old one. Make : Havells/L&T/C&S/Legrand

S&F in repairs MCB single pole 6 to 32 Amps working on 240 volts 50 Hz AC supply,10 KA C series. Make : Havells/L&T/C&S/Legrand

S& F in replacement sub main wiring with two single core PVC insulated unsheathed cable 1100 volts FRLS grade with multi strand copper conductor and drawn through and including PVC conduit along with continuous earthing wire but in green colour complete on surface/concealed and connected to common earth dolly of the following size. Note : Three run of PVC cable and one run of PVC conduit shall be measured as one unit length.

4 Sqmm ( 2 single run of 4 Sqmm and one run of 4 Sqmm as earth wire)

6 Sq.mm ( 3 single run of 6 Sqmm and one run of 6 Sqmm as earth wire)

10 Sq.mm ( 3 single run of 10 Sqmm and one run of 10 Sqmm as earth wire)

Supply and fix in replacement LED Bulb 07/09 watt pin type warm white 3000K. Make SYSKA /Havells/Wipro

S&F in replacement insulation tap 25mm complete all as specified. Make: Philips/CG/Havells

Supply and fixing in replacement PVC gang box suitable for one switch 5 Amps with screw and necessary arrangement complete all as specified and as directed by Engineer in Charge.

All as per srl item No. 63 above but for one 15 amps switch socket outlet complete all as specified and as directed by Engr-in-Charge.

M & L for rigid non metalic PVC medium grade conduit in repairs including junction boxes, tee, bends, elbows, reducers bell mouth tube ends,fixing accessories such as couplers, lock Nuts, saddle pipe hook etc for 25 mm dia.ISI Marked complete all as specified and as directed by Engineer-in-charge.

M & L for PVC casing caping medium grade including, tee, bends, elbows, ends,fixing all accessories etc for 20 mm . ISI Marked complete all as specified and as directed by Engineer-in-charge.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in deep for foundation of pole/stay/cable etc and getting in soft/loose soil complete all as specified and as directed by Engineer-in-charge

Returning refiling including spreading, leveling, watering and well raming in layers each not exceeding 25 cm thickness complete all as specified and as directed by Engineer-in-charge.

Removing surplus spoil to a distance not exceeding 50 mtr and deposting where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by Engineer-in-charge.

Sand cushioning for under ground cables provided with a layer of sand 8 cm deep before laying the cable and 15 cm depth after punning down and stretching the cable all as specified and directed by engineer-in-charge.

Supply and lay well burnt as class ‘B’ bricks as mechanical protection to under ground cables laying with length of the bricks equal to the width of the trench all as specified and directed by engineer-in-charge.

Supply and laying GI tubing light grade of size 80 mm dia with all fitting for protecting the cables in tranches,floors,on poles,in walls complete all as specified and as directed.

All as per item No 72 above but with size 40 mm dia.

Supply,laying, jointing,testing LT cable 1100 volts grade, PVC insulated armoured and PVC sheathed with stranded aluminium conductor heavy duty, including cable glands, cable lugs etc. to suit the cable size, laid in trenches, fixed along the poles bare or through G.I. Pipe laid under floors road etc; fixed concealed in walls encased in G.I. Pipe etc. complete of following sizes:-

LT Cable 10 Sq mm, 2 core

LT Cable 25 Sq mm, 4 core

LT Cable 50 Sq mm, 3.5 core

LT Cable 95 Sq mm, 3.5 core

LT Cable 120 Sq mm, 3.5 core

Taking down and disconnecting of old unserviceable LT U/G cable of any type and size from various side and removing to store for taking credit (credit for above items should be made as per conditioned separately) Complete all as specified and directed by Engineer-in-Charge.

Taking down and disconnecting of old unserviceable street/flood/post top/garden/bollard light fittings of any type and size from various side and removing to store for taking credit (credit for above items should be made as per conditioned separately) Complete all as specified and directed by Engineer-in-Charge.

Supply & Fix in replacement of flood light 150 watt, high power LED 6000K New Generation Energy Saving PCGLF T1 150 Power coated PDC Aluminium body with toughened glass visor. Efficacy > 100Lm/w. in 5700K CCT. IP66 , suitable for highlighting architectural features orretail spaces complete all as specified and directed by Engr-in-Charge. Make Polycab Cat No-PARO206015/Philips/Bajaj/CG

Supply & Fix in replacement of flood light 50 watt, high power LED 6000K energy saving, Highly efficient integral type mid power made of pressure die cast aluminium housing with 10 KV SPD, toughned glass, w/o Lens.IP66, suitable for highlighting architectural features orretail spaces complete all as specified and directed by Engr-in-Charge. Make Halonix Cat No-HLFLD-ML17-50-CW/Philips/Bajaj/CG

Supply & Fix in replacement of LED Street Light 45 watt, LUMOS-SUPER Highly LED street light made of pressure dia cast aluminium housing with high power LEDs, lens & toughened glass, IP66, light distribution Efficacy>110Lm/W. 5700K. The luminaire shall be with BIS Registered electronic driver with input voltage range of 150 to 270V . Make Halonix Cat No-HLSLD-15-45-CWL-R/Halonix/Philips/CG

Supply & Fix in replacement of LED Street Light 60 watt, LUMOS-SUPER Highly LED street light made of pressure dia cast aluminium housing with high power LEDs, lens & toughened glass, IP66, light distribution Efficacy>110Lm/W. 5700K. The luminaire shall be with BIS Registered electronic driver with input voltage range of 150 to 270V . Make Halonix Cat No-HLSLD-15-60-CWL-R/Halonix/Philips/CG

Supply & Fix in replacement of LED Street Light 150 watt,TOP OPENING Highly LED street light made of pressure dia cast aluminium housing with high power LEDs, lens & toughened glass, IP66, light distribution Efficacy>110Lm/W. 5700K. The luminaire shall be with BIS Registered electronic driver with input voltage range of 150 to 270V . Make Halonix Cat No-HLSLD-10-150-CWL-I/Halonix/Philips/CG

Supply & Fix in replacement of LED Post Top Lantern 25 watt with die cast aluminium spigot, spun aluminium powder coated top cover, Aluminium PDC heat sink, opal PC diffuser and clear arcylic. IP65, Optics: PC lenses with Toughened Glass, electronic driver with input voltage range of 170 to 280V. Make Halonix Cat No- HLPT-04-25-CW/Philips/Bajaj.

Supply and fixing decorative downlighter UFO Round POP/CEILING mounting LED made of PDC AL with high efficient LEDs & Glare free opal diffuser 12 watt, 3000 K ,230 volt, LED ceiling fitting, complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer-In- Charge. Make: Halonix/Philips/Havells.

Supply and fixing flexible LED strip light ORIANA 5 watt per meter in roll color, 3000 K ,230 volt, suitable for Cove lighting and indirect lighting including Driver complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer-In- Charge. Make: Halonix/Polycab/Havells.

Excavation in trenches not exceeding 1.5 m wide and depth exceeding 1.5 m and not exceeding 3 m for foundation of pole and getting in soft/loose soil complete all as specified and as directed by Engineer-in-charge

Supply and erect steel tubular swaged poles type 410 SP-31(9 meter long) with 300mm x 300mm x6mm, MS base plate continuously welded to pole, final taper plug, bolts nuts and screws all as specified including two coasts of black bituminous paint internally through out and externally for embedded portion & two coats of aluminum paint over coat of red oxide primer on exposed surface complete

(Note- for Item No. 86 - Excavation/earthwork in any type of soil/strata, PCC in foundation,plinth block etc. shall be measured and paid separately)

M&L for PCC type D-2 ( 1:4:8) using 40mm graded stone aggregates in foundation and bed plate of electric poles incl neccessory form work and fair finis to exposed surface without using extra cement etc.complete all as specified.

M&L for PCC type B-1 ( 1:2:4) using 20mm graded stone aggregates as in bands, coping etc. including slightly rounded or chamfered angles complete as specified and directed by engineer-in-charge.

M&L earthing complete with galvanised steel earth plate electrode 600x600x6.3 mm, burried vertically in ground ( earth pit not less than 2.25 m deep below normal ground level) with top edge of plate vertically to a depth not less than 1.5m below ground level, connected to galvanised steel earth lead wire 4.00 mm dia ( 8 SWG) of any length as reqd at site, by means of bolts, nuts, check nuts and washers of galvanised steel, earth lead wire encased in and including 15mm bore G.I. light grade pipe from earth plate upto pole, upto 2.40 M height from GL by means of and including 25 x 3 mm M.S.F.I. Clamps, bolts, nuts and washers etc. and GI Earth lead wire poles/feeders, gang operated air break switches etc. with provision of charcoaldust and common salt packed all around the earth plate, including necessary excavation and earth work in any typeof soil/strata and testing complete all as specified and directed and shown on electrical plate No. 5 of SSR Part I (1991). Note:- GI Wire more than 7.5 m will be measured separately.

Supply and fixing in replacement MCCB four Pole 400 Amps, 415 volt thermal release bearing adjestable type breaking cap 50 KA, comlete all as specified and as directed by Engineer-in-Charge. Make - Havells/L&T/Legrand.

Supply and fixing in replacement MCCB four Pole 320 Amps, 415 volt thermal release bearing adjestable type breaking cap 36 KA, comlete all as specified and as directed by Engineer-in-Charge. Make - Havells/L&T/Legrand.

Supply and fixing in replacement MCCB four Pole 250 Amps, 415 volt thermal release bearing adjestable type breaking cap 36 KA, comlete all as specified and as directed by Engineer-in-Charge. Make - Havells/L&T/Legrand.

Supply and fixing in replacement MCCB four Pole 125 Amps, 415 volt thermal release bearing cap 25 KA suitable for the MCB DB above comlete all as specified and as directed by Engineer-in-Charge. Make - Havells/L&T/Legrand.

Supply and fixing in replacement MCCB four Pole 100 Amps, 415 volt thermal release bearing cap 25 KA suitable for the MCB DB above comlete all as specified and as directed by Engineer-in-Charge. Make - Havells/L&T/Legrand.

S&F MCB TP, 100 Amps, 10 KA 440 volt 50 Hz all as specified ans directed by engineer in- charge. Make: Havells/C&S/Standard

Supply & fix in replacement PVC FRLS Flexible cable copper conductor, unsheathed , 1100 volts grade confirming to IS:694/1990 of size 1.5 sqmm. Make: Finolex /Plaza/Polycab.

Supply & fix in replacement PVC FRLS Flexible cable copper conductor, unsheathed , 1100 volts grade confirming to IS:694/1990 of size 2.5 sqmm. Make: Finolex /Plaza/Polycab.

Supply & fix in replacement PVC FRLS Flexible cable copper conductor, unsheathed , 1100 volts grade confirming to IS:694/1990 of size 4.0 sqmm. Make: Finolex /Plaza/Polycab.

Supply & fix in replacement PVC Flexible cable copper conductor, twin core, 1100 volts grade confirming to IS:694/1990 of size 0.75/1.0 sqmm. Make: Finolex /Plaza/Polycab.

Taking down carefully ceiling fans of any size for repair/service/rewinding/greasing and refixing in its original position after necessary repair/rewinding/servicing/greasing etc including connecting up with flexible twin core cable 23/0.0076 from ceiling rose or connector to fan complete and to ensure that ceiling fan should be fix in position in all respect all as directed by Engineer in Charge.

All as per item No 100 above but Exhaust fan.

All as per srl item No 100 above but for wall mounted fan/ pedestal fan.

Hanging/fixing only ceiling fan of any sweep and make after necessary repair/rewinding etc including connecting up with flexible twin core cable 23/0.0076 from ceiling rose or connector to fan complete all as directed by Engineer in Charge.

All as per item No.103 above but Exhaust fan of any sweep.

All as per item No.103 above but wall mounted fan/ pedestal fan.

M&L for Rewinding of ceiling fan of sweep 1200mm/1400 mm sweep of any make and model with super enameled copper winding wire of same size as per old winding wire and confirming to relevent IS including replacement of insulation material, varnishing, greasing and lubricating, ball baring, GM bushes and replacement of suitable capacity of condenser and testing complete all as specified and directed by Engineer in Charge.

M&L for rewinding of exhaust fan of 12" (300mm) sweep with super enamelled winding wire of same size as per old winding wire and confirming to IS including replacement of insulating material, warnishing, greasing lubricating, ball bearing, GM bushes and replacement of suitable capacity of condenser and testing complete all as specified and directed by Engineer in Charge.

All as per item No 107 above but size of exhaust fan 450 mm sweep

M & L for repair to ceiling fans of 1200 mm / 1400 mm sweep by replacing unserviceable ball bearing No 6201/6202/6203 and suitable capacity of condenser including necessary greasing to the bearings complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of rubber real for ceiling fan complete all as specified and directed by Engineer in Charge.

S&F in replacement of mild steel U clamps including 10 mm dia but, nuts, washers and split pin for ceiling fan complete all as specified and directed by Engineer in Charge.

S&F in replacement of mild steel fan hook made out of 12 mm dia mild steel round bar of suitable size as per existing hook as directed by Engineerin Charge.

S&F in replacement of exhaust fan heavy duty 300 mm sweep including necessary fixing arrangement for proper fixing in wall and making hole as per site requirement complete all as specified and as directed by Engineer-in-Charge. Make - Havells or in equivalent to Crompton/Bajaj.

S&F in replacement of ceiling fan heavy duty 1200 mm sweep including necessary fixing arrangement for proper fixing/hanging as per site requirement complete all as specified and as directed by Engineer-in-Charge. Make - Havells or in equivalent to Crompton /Bajaj.

S&F in replacement of exhaust/ventilating fan heavy duty plastic body 250 mm sweep including necessary fixing arrangement for proper fixing in wall and making hole as per site requirement complete all as specified and as directed by Engineer-in-Charge. Make - Model Havells or equivalent of Crompton / Bajaj

S&F in replacement of wall mounting fan heavy duty 450 mm sweep including necessary fixing arrangement for proper fixing on wall as per site requirement complete all as specified and as directed by Engineer-in-Charge. Make - Havells or equivalent of Crompton / Bajaj

S & F in replacement of exhaust fan louver at any size and make all as specified and directed by Engineer in Charge.

M & L for PVC three core sheathed cable with stranded copper conductor of size 0.5 sqmm complete all as specified and directed by Engineer-in-Charge.

Taking down old MCCBs of any type and size complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Recessed mounting round COB LED downlighter with PDC AL body, separate driver, CRI>80, Beam Angle 36 Digree with high efficient LEDs & Glare free opal diffuser 5/7 watt, 3000 K ,230 volt, LED ceiling fitting, complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer-In- Charge. Make: Halonix/Philips/Havells.

Supply & fix in replacement PVC FRLS Flexible cable 3 core copper conductor, unsheathed , 1100 volts grade confirming to IS:694/1990 of size 2.5 sqmm. Make: Finolex /Plaza/Polycab.

M/S PRADEEP ENTERPRISES

M/S MG GROUP

JAIPAL AND BROTHERS

Saini Enterprises

M/S LADPURIA ENTERPRISES