COMPREHENSIVE REPAIR AND MAINTENANCE OF DG SET INSTALLED AND CERTAIN ITEMS OF PLUNGE BATH, BLEACHING DOZER AT ZONE C UNDER AGE E/M OF GE (EAST) JABALPUR

Amount

Comprehensive maintenance of DG set including routing/preventive maintenance checks at least once in a month, checking up of engine and alternator for trouble free functioning and attending break downs/complaints as and when required. The type of work / maintenance services to be carried out during comprehensive maintenance are as under :- (a) Checking of Engine Oil level. (b) Checking of oil bath cleaner oil level. (c) Drain sediments from fuel tank. (d) Checking of pre- cleaner dust pan. (e) Checking of air cleaner restriction. (f) Checking of coolant level. (g) Record Oil pressure (h) Checking/tightening of all nuts/bolts of engine and alternator. (i) Checking of AVM pads. (k) Checking of diaphragm coupling (l) Checking of tappet clearance m) Clean fuel tank breather (m) Clean crank case breather (n) Checking of Air piping. (o) Cleaning of oil bath Air cleaner Tray screen. (p) Check / adjust Belts. (q) Checking battery voltage, water level and apply jelly on terminals.(r) Checking fan hub/air blower hub and water pump. (s) Cleaning turbo charger. (t) Tighten manifold Nuts of cops screws. (u) Cleaning of electrical connections with CTC solution. (v) Checking of safety controls (w) Cleaning of cooling system/radiator assembly (x) Cleaning of Engine and radiator assy (y) Checking of Engine Oil Level. The capacity and location of the DG sets that are included in the comprehensive maint are as under :- Note : - (i)The comprehensive maintenance includes carrying out preventive maintenance excluding replacing all the unserviceable / worn out spares to keep the DG set for trouble free functioning. (ii) The rate quoted deemed to be included all the minor spares such as screws, clips washers , distilled water, electrolite etc and other spare parts shall be measured and paid separately under respective items. (iii) Make and Specification of spare parts of DG Sets as per existing make/specification.

ditto all as per item No 1 above for 125 KVA Capacity Make Kirloskar installed at FOTS

ditto all as per item No 1 above for 75 KVA capacity, Make Kirloskar, installed at Rawalson Pump House and at 37 Borewell Pump House

ditto all as per item No 1 above for 63 KVA capacity, Make Kirloskar, installed at Depot Regt .

ditto all as per item No 1 above for 50 KVA capacity, Make Kirloskar, installed at Signal Record ( 4 DG Sets)

ditto all as per item No 1 above for 40 KVA capacity, Make Kirloskar, installed at Automation Cell PAO (OR) Signal Record,

ditto all as per item No 1 above for 15 KVA capacity, Make Kirloskar, installed at New Nehra Coy & 4 Tank

S&F in repairs set of fuel pre-filters and fine-filters as per sample and make for the following capacities of DG sets. Each set shall be comprising complete set of pre/fine filters.

ditto all as per item No 08 above for 125 KVA Capacity, Make Kirloskar

ditto all as per item No 08 above for 75 KVA capacity, Make Kirloskar

ditto all as per item No 08 above for 63 KVA capacity, Make Kirloskar.

ditto all as per item No 08 above for 50 KVA capacity ,Make Kirloskar.

ditto all as per item No 08 above for 40 KVA capacity ,Make Kirloskar.

Dismantling Supply and fix set of lub/ engine oil filter /as per sample and make of the following capacity of DG Sets . Each sets shall be comprised complete set of engine oil filter.

ditto all as per item No 14 above for 125 KVA Capacity, Make Kirloskar

ditto all as per item No 14 above for 75 KVA capacity, make Kirloskar

ditto all as per item No 14 above for 63 KVA capacity ,make Kirloskar.

ditto all as per item No 14 above for 50 KVA capacity ,make Kirloskar.

ditto all as per item No 14 above for 40 KVA capacity ,make Kirloskar.

S&F in repairs battery lead with stranded copper conductor of size 95 /70sqmm single core PVC insulated, flexible.

S&F in repairs V- belt for fan A 56/A55/B47.

S&F in repairs stopping solenoid coil 12V for 125/110/75/63/50/40 KVA DG set.

S&F in repairs off solenoid coil 12V for 50/75/110 KVA push on type ( for double Tank DG set).

S&F in repairs battery terminals of copper.

S&F in repairs Benjo bolts .

S&F in repairs fuel pipe filter to FIP wire braided.

S&F in repairs fuel pipe (rubber pipe ) upto 15 mm size from fuel tank to the DG set & over flow return complete all as specified

S&F in repairs carbon brush suitable for 125/110/75/63/50KVA Gen Set.

S&F in replacement anti vibration mounting pad suitable for 125/110/75/50 KVA for the DG set .

S&Fin repairs gate valve 15 mm bore cast copper alloy for the fuel tank out let.

S&F in replacement water outlet and inlet hose pipe from radiator to Engine and back Engine to radiator

S&F in repairs lubricant oil pipe.

S&F in repairs anti vibration rubber pad for side radiator.

S&F in repairs DC ammeter 12 V of range (-) 30- 0- (+)30 A .

S&F in repairs lubricant oil pressure guage 0 to 10 kg / sq cm.

S&F in repairs automatic voltage regulator electronic static type suitable for DG set of upto 125 KVA 3 Phase 415 Volts

S&F in repairs maintenance free power pack unit 12 volt, diamension 355x175/x235 mm suitable for generating set 40 KVA to 125 KVA, Make : Exide/Amaron/Luminous

Reconditioning of lead acid batteries of which cells have been got short circuited including replacement of both the poles of capacity 180 AH

Repairing the self starter of Mico make after removing from the Gen set of capacity 110/75/63 KVA and transporting to an authorised sevice centre and vice versa complete all as specified. Note:- Replacement of the following U/S parts shall be measured and paid separately under relevent items:-

Armature - 1 Nos

Bendex of suitable size-1 nos

Bearing / bush -1 sets

Relay switch of suitable size-1 nos

Repairing the self starter of Mico make after removing from the Gen set of capacity 40 KVA and transporting to an authorised sevice centre and vice versa complete all as specified. Note:- Replacement of the following U/S parts shall be measured and paid separately under relevent items:-

Armature - 1 Nos

Bendex of suitable size-1 nos

Bearing / bush -1 sets

Relay switch of suitable size-1 nos

Supply only A series electronic timers on delay function model A1D1 / AIDCS ,12 V DC, with time range 0.3S to 30Min. Make EAPL suitable for AMF panel. Make : L&T/Schneider/Havells

Supply only B series electronics timers model B1DCA-X adjustable cyclic fuction 240V AC suitable for AMF panel. Make : L&T/Schneider/Havells

Supply only relay 12 V DC , Make PLA, 8/11 pins suitable for AMF panel. Make : L&T/Schneider/Havells

Supply only indicator lamps DC filament type 10 W ,12 V . Make : L&T/Schneider/Havells

Supply only indicator lamps AC 230 V, LED type for the panel boards. Make : L&T/Schneider/Havells

Supply only push builtin with contact element 5A. Make : L&T/Schneider/Havells

Supply only Current Transformer as required for the Gen/ AMF panel Make : L&T/Schneider/Havells

Supply only Ameter of range 100 Amps as required for the Gen/ AMF panel. Make : L&T/Schneider/Havells

Supply only Volt meter 0 to 600 V range suitable for the Gen/ AMF panel. Make : L&T/Schneider/Havells

Supply only frequency meter 45 to 60 Hz range suitable for theGen/ AMF panel. Make : L&T/Schneider/Havells

Supply only PVC connector heavy duty 12 way, 100 A suitable for AMF panel. Make : L&T/Schneider/Havells

Dismantling Unservicable contactor of capacity ML 1.5 to ML 4 and mnx80A Make : L&T/Schneider/Havells

S&F main contactor MN X80A, 3 pole suitable for AMF panel. Make : L&T/Schneider/Havells

S&F main contactor, CAS 22 E-1 ,3 pole suitable for AMF panel. Make : L&T/Schneider/Havells

S&F main contactor ML 1.5, 3 pole suitable for AMF panel. Make : L&T/Schneider/Havells

S&F main contactor ML 2, 3 pole suitable for AMF panel. Make : L&T/Schneider/Havells

S&F main contactor ML 3, 3 pole suitable for AMF panel. Make : L&T/Schneider/Havells

S&F main contactor ML 4, 3 pole suitable for AMF panel. Make : L&T/Schneider/Havells

S&F repairs auxiliary contactor of suitable size for AMF panel. Make : L&T/Schneider/Havells

Drain out the outlived engine oil, clean the oil sump and and supply and filling the engine oil as recommended by manufacturer of DG Set all as directed.

Providing aluminium cladding to the exhaust pipe and silencer of the DG sets of any capacity by engaging highly skilled technicians after removing the existing totally worn out asbestos rope ( wherever available) and prepairing the surface , applying one coat of red oxide primer and including 50mm thick high quality glass wool thermal insulator packing which is bidinding tightly with chicken wiremesh of approved quality to the exhaust pipe and neatly finishing sealing with 24 SWG aluminium sheet all as directed by Engr -in- charge.

M&L for replacing the unserviceable stop solenoid coil suitable for 110 /125/63/50 KVA Gen Set.

Opening the coupling , dismantling the alternator carefully removing the fly wheel dismantling the unserviceable starting gear wheel , supply and fixing new starting gear wheel, fixing back the alternator and properly coupled back all as directed including servicing the 110/125/50 KVA Gen Set complete all as specified.

Opening the coupling , dismantling the alternator carefully removing the fly wheel dismantling the unserviceable starting gear wheel , supply and fixing new starting gear wheel, fixing back the alternator and properly coupled back all as directed including servicing the 40 KVA Gen Set complete all as specified.

Dismantling/ taking down Unservicable onload change over switch capacity 125 Amp to 630 Amp

S&F On load change over switch 4 pole 630 Amps with sheet metal enclosure, Make : L&T/ Schneider/ Havells

S&F On load change over switch 4 pole 400 Amps with sheet metal enclosure, Make : L&T/ Schneider/ Havells

S&F On load change over switch 4 pole 320 Amps with sheet metal enclosure, Make : L&T/ Schneider/ Havells

S&F On load change over switch 4 pole 250 Amps with sheet metal enclosure, Make : L&T/ Schneider/ Havells

S&F On load change over switch 4 pole 200 Amps with sheet metal enclosure, Make : L&T/ Schneider/ Havells

S&F On load change over switch 4 pole 160 Amps with sheet metal enclosure, Make : L&T/ Schneider/ Havells

S&F On load change over switch 4 pole 125 Amps with sheet metal enclosure, Make : L&T/ Schneider/ Havells

Dismantling Unservicable MCCB capacity 100 Amp to 630 Amp.

S&F MCCB 630Amps, 36 KA,4 POLE ,(with Adjustable microprocessor released) Make : L&T/ Schneider/ Havells

S&F MCCB 400 Amps, 36 KA,4 POLE ,(with Adjustable microprocessor released) Make : L&T/ Schneider/ Havells

S&F MCCB 320Amps, 36 KA,4 POLE ,(with Adjustable microprocessor released) Make : L&T/ Schneider/ Havells

S&F MCCB 250Amps, 35 KA,4 POLE ,(with Adjustable microprocessor released) Make : L&T/ Schneider/ Havells

S&F MCCB 200Amps, 35 KA,4 POLE (with Adjustable microprocessor released) Make : L&T/ Schneider/ Havells

S&F MCCB 160Amps, 35 KA,4 POLE ,(with Adjustable microprocessor released) Make : L&T/ Schneider/ Havells

S&F MCCB 125Amps, 25 KA,4 POLE ,(with Adjustable microprocessor released) Make : L&T/ Schneider/ Havells

S&F MCCB 100Amps, 25 KA,4 POLE ,(with Adjustable microprocessor released) Make : L&T/ Schneider/ Havells

S&F MCCB 250Amps, 35 KA, 3 POLE ,(with Adjustable microprocessor released) Make : L&T/ Schneider/ Havells

S&F MCCB 200Amps, 35 KA, 3 POLE (with Adjustable microprocessor released) Make : L&T/ Schneider/ Havells

S&F MCCB 160Amps, 35 KA, 3 POLE ,(with Adjustable microprocessor released) Make : L&T/ Schneider/ Havells

S&F MCCB 125Amps, 25 KA, 3 POLE ,(with Adjustable microprocessor released) Make : L&T/ Schneider/ Havells

S&F MCCB 100Amps, 25 KA, 3 POLE ,(with Adjustable microprocessor released) Make : L&T/ Schneider/ Havells

Dismantling U/ taking down UNSV Switch fuse unit of capacity 200Amp to 32 Amp of any size.

SUPPLY & FIX TPN switch fuse unit with HRC fuse 200 amp, double break heavy duty, Make : L&T/ Schneider/ Havells

SUPPLY & FIX TPN switch fuse unit with HRC fuse 160 amp,double break heavy duty, Make : L&T/ Schneider/ Havells

SUPPLY & FIX TPN switch fuse unit with HRC fuse 63 amp, double break heavy duty, Make : L&T/ Schneider/ Havells

SUPPLY & FIX TPN switch fuse unit with HRC fuse 32 amp, heavy duty, HAVELLS CAT NO-IHSHTE4032 or equivalent of HPL/STANDERD

S&F in repairs multi functional meter confirming to quasar class 3 Phase 4W IPM 240V line to earth 5A, CL1 Make : L&T/ Schneider/ Havells

S&F in repairs over load relay range 45-75 Amp for Power Contactor MNX80, Make : L&T/ Schneider/ Havells

S&F in repairs DC Ralay for AMF Panel Make : L&T/ Schneider/ Havells

S&F in repairs Battery 12 volt 180 AH Make : Exide/ Amaron/ Luminous

Earthing complete with galvanized steel earth plate electrode 600mm x600 mm x 6mm buried directly in ground vertically to a depth not less then 2.25 meter below normal ground level with top edge of the plate not less then 1.50 meter below normal ground level connected to galvanized earth wire 4.00mmdia by means of bolts ,nuts ,check nuts and washers complete up to and including test point made out of 40 x 6mm alum flat including earthing pit , charcoal common salt ,Earthing lead 4.00mm dia up to 7.5m, 20mm dia medium grade GI watering pipe ,G.I. protection pipe 15 mm dia up to 7.5m long,,PPC pit in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate ,PCC pit cover including earth work complete all as shown in electrical plate No-5 of SSR-1991 (part-I)

Note :- Schedule of Credit amounting to Rs. 62,025.00 to be deducted during AOC

M/S INDIA ENTERPRISES

Sachdeva Enterprises