Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.7 CrAccepted-AOC CHIRANG PIN 783380 | BONGAIGAON | ASSAM | 783380 | ₹1.7 Cr | L1 | Accepted-AOC Awarded |
| 2 | L2₹1.8 Cr+₹2.4 L (1.38%)Rejected-AOC | ₹1.8 Cr+₹2.4 L (1.38%) | L2 | Rejected-AOC Not Awarded |
| 3 | L3₹1.8 Cr+₹6.0 L (3.45%)Rejected-AOC F A ROAD KUMARPARA PANCHALI KUMARPARA GUWAHATI PIN 781001 | KAMRUP METRO | ASSAM | 781001 | ₹1.8 Cr+₹6.0 L (3.45%) | L3 | Rejected-AOC Not Awarded |
| 4 | Rejected-Technical H NO 56 RAM NAGAR ODALBAKRA KAMRUP GUWAHATI 781034 | KAMRUP METRO | ASSAM | 781034 | - | - | Rejected-Technical Bid Evaluation Committee did not find the bid technically qualified |
| Sl No | Description | Qty | Unit | M/S RAJSHEKHAR CONSTRUCTIONS PVT LTD L3 | Sri Krishna Barman L1 | Himangshu Nath L2 |
|---|---|---|---|---|---|---|
| 1.00Civil Works | ||||||
| 1.01 | DSR No. 5.3
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | 5.85 | cum | 8,175.73 ₹49,299.65 Lowest | 10,500 ₹63,315 | 9,975.38 ₹58,954.49 |
| 1.02 | DSR No. 5.9.5
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers. | 31.2 | sqm | 547.52 ₹17,181.17 | 500 ₹15,690 Lowest | 566.13 ₹17,697.23 |
| 1.03 | DSR No. 5.22
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. | 230.26 | kg | 80.69 ₹18,593.88 Lowest | 85 ₹19,587.06 | 83.43 ₹19,215.27 |
| 1.04 | DSR No. 8.32
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including:
(a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.
(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. | 468 | sqm | 4,026.78 ₹18,85,257.86 Lowest | 4,250 ₹19,89,765 | 4,163.69 ₹19,48,856.74 |
| 1.05(c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. | ||||||
| 1.06 | DSR No. 9.48
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
9.48.1 Fixed to steel windows by welding. | 550 | kg | 162.9 ₹89,624.32 | 170 ₹93,530.6 | 159.93 ₹87,971.1 Lowest |
| 1.07 | DSR No. 10.16
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
10.16.1 Hot finished welded type tubes. | 11,439.8 | kg | 139.41 ₹15,94,847.61 | 135 ₹15,44,397.3 Lowest | 136.87 ₹15,65,773.64 |
| 1.08 | DSR No. 12.1
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
12.1.1 1.00 mm thick with zinc coating not less than 275 gm/m². | 1,005.3 | sqm | 1,188.32 ₹11,94,832 | 1,250 ₹12,56,850 | 1,166.66 ₹11,72,913.3 Lowest |
| 1.09 | DSR No. 12.51.1
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :
12.51.1 Ridges plain (500 - 600mm) | 200 | Rm | 405.54 ₹81,181 | 450 ₹90,081 | 398.15 ₹79,653.89 Lowest |
Tender Value
Refer Docs
EMD Value
₹4 L
Closing Date
6 Nov 2025, 2:00 pmClosed
Project Director, APFBC
3rd Floor, Aranya Bhawan, Near Srimanta Sankaradeva Kalakshetra Panjabari, Guwahati - 781037 Assam
UPGRADATION OF ARANYA BHAWAN, PANJABARI, GUWAHATI
2025_PCCF_48296_1
APFBC/Ph-II/RWAB/2025/397/32
Open Tender
Civil Works
Works
Panjabari, Guwahati
Please refer Tender documents
3 documents required · 3 mandatory
₹3,500
₹4 L
Yes
28 Nov 2025
30 Oct 2025
6 Nov 2025
30 Oct 2025
6 Nov 2025
30 Oct 2025
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.13 MB
Tendernotice_2.pdf
PDF • 1.25 MB
SBD.pdf
Tender Documents • 1.24 MB
BOQ_76799.xls
BOQ • 0.45 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .