REPAIR AND MAINT OF STEEL FURNITURE OF MD ACCN AND OTM ACCN AT MIL STN PATIALA UNDER GE(S) PATIALA

Amount

LOCKER BED SIDE STEEL (DRG NO. FD-1029 / 257) : Repair/replacement of following parts of locker bed side steel complete all as specified and shown on drawing :- Taking out of unsv Handle and S&F New Handle including Nut and Bolt with Washer complete as per existing shape ,size and as per Drg.

Taking out of unsv Butt Hinges and S&F New Butt Hinges complete as per existing shape ,size and as per Drg.

Taking out of unsv Hasp and Staple and S&F New hasp and staples complete as per existing shape ,size and as per Drg.

Taking out of unsv Hanging Rod of conduit Pipe and S&F New Hanging Rod with bracket complete as per existing shape,size and as per Drg.

Taking out of unsv /Rusted Shelves of Locker Bed side steel and S&F New Shelves dully Painted complete as per existing shape ,size and as per Drg.

Adjustment of existing shelves by providing New clamps/clips after removing the old unsv clamps/clips as per existing shape,size and as per drg.

Two coat spray painting to locker steel inner and outer surface with synthetic enamel paint olive green Make .Berger/Asian/Narolac including preparation of surface after cleaning dirt/dust with emery paper complete all as per drg.

ALMIRAH LARGE STEEL WITH SHELVES (DRG NO. FD-67/1031/351: Repair/replacement of following parts of almirah large steel complete all as specified and shown on drawing :- Taking out of unsv Handle and S&F New Handle including Nut and Bolt with Washer complete as per existing shape ,size and as per Drg.

Taking out of unsv /Rusted Shelves and S&F new shelves dully Painted complete as per existing shape ,size and as per Drg.

Taking out of unsv Lock and S&F New Lock with Duplicate Key complete as per existing shape ,size and as per Drg.

Adjustment of existing shelves by providing New clamps/clips after removing the old unsv clamps/clips as per existing shape,size and as per drg.

Two coat spray painting to almirah large steel inner and outer surface with synthetic enamel paint OG/ as per specified colour in drawing. Make .Berger/Asian/Narolac including preparation of surface after cleaning dirt/dust with emery paper complete all as directed and specified.

TABLE OFFICE CLERK STEEL (DRG NO. FD-84(M), 381, 307 & 1104) Repair/replacement of following parts of ''TABLE OFFICE CLERK STEEL" complete all as specified and shown on drawing :- Top using of 18/19mm thick prelaminated particle board Make (Archid/Novapan/Eco) ISI marked exterior grade and 6mm thick Teak edging all around.

Taking out of unsv Legs and S&F new Legs of mild steel square tube 25 mm as per existing shape and size.

Taking out unsv stiffner and S&F new stiffner of mild steel square tube 25 mm as per existing shape and size.

Taking out of unsv Drawer and S&F new Drawer of mild steel square tube 25 mm as per existing shape and size.

Taking out unsv Lock of Drawer and S&F new Lock as per Drg.

Taking out old unsv Shoes/Toes and S&F new Hard Rubber/ PVC Shoes / Toes as per Drg.

Supply and fix back of box of table made out of 1.00mm thick MS sheet duly painted with a coat of pink primer as shown on drg and as directed and specified.

Supply and fix side of box of table made out of 1.00mm thick MS sheet duly painted over a coat of pink primer all as shown on drg and as specifed and directed

Two coat spray painting to article with synthetic enamel paint OG/ as per specified colour in drawing. Make .Berger/Asian/Narolac including preparation of surface after cleaning dirt/dust with emery paper complete all as directed and specified.

TABLE OFFICE OFFICER STEEL (DRG NO. FD-1003) Repair/replacement of following parts of ''TABLE OFFICE OFFICER STEEL" complete all as specified and shown on drawing :- Top using of 18/19mm thick prelaminated particle board Make (Archid/Novapan/Eco) ISI marked exterior grade and 6mm thick Teak edging all around.

Taking out of unsv Legs and S&F new Legs of mild steel square tube 25 mm as per existing shape and size.

Taking out unsv stiffner and S&F new stiffner of mild steel square tube 25 mm as per existing shape and size.

Taking out of unsv Drawer and S&F new Drawer of mild steel square tube 25 mm as per existing shape and size.

Taking out unsv Lock of Drawer and S&F new Lock as per Drg.

Taking out old unsv Shoes/Toes and S&F new Hard Rubber/PVC Shoes Toes as per Drg.

Supply and fix back of box of table made out of 1.00mm thick MS sheet duly painted with a coat of pink primer as shown on drg and as directed and specified.

Supply and fix side of box of table made out of 1.00mm thick MS sheet duly painted over a coat of pink primer all as shown on drg and as specifed and directed

Two coat spray painting to article with synthetic enamel paint OG/ as per specified colour in drawing. Make .Berger/Asian/Narolac including preparation of surface after cleaning dirt/dust with emery paper complete all as directed and specified.

TABLE 900mmx600mmx760mm WITH / WITHOUT DRAWER (Drg No FD -1007 / 1008 / 283 / 223/ 310) M & L for carrying out repair/replacement of following parts of Table 900mmx600mm as per drawing after dismantling the old parts complete all as specified :- Top made out of 18mm thick prelaminated particle board exterior grade, Make : Archid/ Novapan /ECCO ISI marked and 4mm thick teak wood beading all around.

Taking out of unsv Legs and S&F new Legs of mild steel squre tube 25 mm as per existing shape and size.

Taking out unsv stiffner and S&F new stiffner of mild steel square tube 25 mm as per existing shape and size.

Taking out of unsv Drawer and S&F new Drawer of mild steel square tube 25 mm as per existing shape and size.

Taking out unsv Lock of Drawer and S&F new Lock as per Drg.

Taking out old unsv Shoes/Toes and S&F new Hard Rubber/PVC Shoes Toes as per Drg.

Two coat spray painting to article with synthetic enamel paint OG/ as per specified colour in drawing. Make .Berger/Asian/Narolac including preparation of surface after cleaning dirt/dust with emery paper complete all as directed and specified.

TUCK WELDING M&L for Joining the Broken Parts of steel Furniture by Tuck Welding all as Directed

CHAIR CB STEEL WITH ARMS (DRG NO. FD-75) : Repair/replacement of following parts of ''Chair CB with arms" complete all as specified and shown on drawing :- Taking out old unsv Seat and S&F New Seat as per Drg

(b) Taking out old unsv Back and S&F New Back as per Drg

(c) Taking out old unsv cleats and S&F new Cleats as per Drg.

(e) Taking out old unsv hard Rubber/PVC Shoes and S&F new as per Drg.

(f) Taking out old unsv arm rest and S&F new arm rest as per drg

(g) Taking out old unsv pvc cap and S&F new as per Drg.

Two coat spray painting to article with synthetic enamel paint OG/ as per specified colour in drawing. Make .Berger/Asian/Narolac including preparation of surface after cleaning dirt/dust with emery paper complete all as directed and specified.

CHARPOY GI PIPE WITH 12mm THICK PLYWOOD TOP (DRG NO. FD-220) Repair/replacement of following parts of ''Charpoy GI pipe with 12 mm thick plywood top" complete all as specified and shown on drawing :- Plywood top made out of 12mm thick commercial type BWR grade as per existing shape and size as per Drg complete all as directed by Engr-in-Charge. Make (Kit ply/Duro/Green ply) ISI marked.

S&F of long rails as per existing shape and size as per drg.

Conversion of long rails obtained from ser No 8.02 above into short rails as per existing shape and size as per drg.

Conversion of short rails obtained from ser No 8.03 above into legs as per existing shape and size as per drg.

GI elbow 3 way 32mm dia as per existing shape and size and as per drg. Note for Item no 8.01 to 8.05: Cost of nuts, bolts, screws and washer required shall be deemed included in quoted rate.

ALMIRAH SMALL STEEL WITH SHELVES (DRG NO. FD-1032/243): Repair/replacement of following parts of almirah small steel complete all as specified and shown on drawing :- Taking out of unsv Handle and S&F New Handle including Nut and Bolt with Washer complete as per existing shape ,size and as per Drg.

Taking out of unsv /Rusted Shelves and S&F new shelves dully Painted complete as per existing shape ,size and as per Drg.

Taking out of unsv Lock and S&F New Lock with Duplicate Key complete as per existing shape ,size and as per Drg.

Adjustment of existing shelves by providing New clamps/clips after removing the old unsv clamps/clips as per existing shape,size and as per drg.

Two coat spray painting to almirah small steel inner and outer surface with synthetic enamel paint OG/ as per specified colour in drawing. Make .Berger/Asian/Narolac including preparation of surface after cleaning dirt/dust with emery paper complete all as directed and specified.

TEAPOY VERANDAH (Drg No. FD-255 / 383) M & L for carrying out repair/replacement of following parts of Teapoy as per drawing after removing the old unservicable parts complete all as specified. Supply & fix MS conduit pipe of 20 mm bore as in short runner of Teapoy verandah by welding duly painted with a coat of pink primer after dismantling old broken/ unserviceable runner all as shown on drg and as specified and directed

All as per ser item No. 10.01 hereinbefore but long runner.

Two coat spray painting to article with synthetic enamel paint OG/ as per specified colour in drawing. Make .Berger/Asian/Narolac including preparation of surface after cleaning dirt/dust with emery paper complete all as directed and specified.

Supply & Fix 18/19mm thick pre laminated pratical board (Make : Archid/ Novapan /ECCO ISI marked) one side T/F other side white alongwith 4mm thick teak wood beading all around the top of tepoy verandah after dismantling old damage/unserviceable top all as shown drg all as specified and directed.

Supply & fix of leg shall be of 20 mm dia MS conduit pipe wall thick of 1.6 mm made of in U Shape

S&F hard rubber shoes to legs

CHAIR VERANDAH (Drg No. FD-256) M & L for carrying out repair/replacement of following parts of chair verandah, complete all as specified and shown on drgs after removing the old broken part. M & L of Welding 'U' shape legswith arms of conduit pipes 20mm dia 16 gauge thick all as specified & shown on drg.

S&F hard rubber toes to legs

Two coat spray painting to article with synthetic enamel paint OG/ as per specified colour in drawing. Make .Berger/Asian/Narolac including preparation of surface after cleaning dirt/dust with emery paper complete all as directed and specified.

Recanning of verandah chairs with plastic cane (Oval Shape) 2mm wide and border with 4mm wide cane complete as per Godrej pattern using make: Shah/Premier brand cane (Removing of old broken cane shall be done at BSO Yard

CHARPOY GI PIPE NYLON NEWAR (DRG NO. FD-220) Repair/replacement of following parts of ''Charpoy GI pipe with nylon newar" complete all as specified and shown on drawing :- Removing the existing u/s broken long rails of charpoy GI Pipe and supplying and fixing new long rails made out of GI tubing 32mm dia (medium grade. ISI marked) all as specified and shown on drg.

Making out short rails from broken long rails obtained from ser Item No. 12.01 above and fixing to the charpoy GI Pipe complete all as specified and shown on drg including removing existing broken/unserviceable short rails.

Making out legs for charpoy GI pipe from broken GI pipe obtained from Srl item no 12.02 above and fixing to the charpoy GI Pipe complete all as specified and shown on drg including removing existing broken/unserviceable legs.

Removing the existing broken/unserviceable elbows of charpoy GI Pipe and supplying and fixing new 32mm bore 3 way elbows ISI marked all as specified and shown on drg.

Supplying and fixing 5mm thick GI check nuts suitable for 32 mm dia pipe all as specified and shown on drg. Notes for item No. 12.01 to 12.05:- Unit rates quoted above include for dismantling and reassembling frame of charpoy GI pipe including tightening and providing extra threads and welding the joints as required and directed by Engineer-in-charge.

Supplying and taping new nylon newar Best quality white/light coloured of Make as approved by GE and reweaving charpoys GI pipe all as specified and shown on drg including removing existing the old newar(weight of nylon Newar shall not be less than 1.7 kg per charpoy) as required and directed by Engr-in-charge. Note: Before taping it will be ensured that the charpoy frame is tightened properly. Unit rate quoted against this item includes this element.

TABLE STEEL 900 x 900 x 760 mm (DRG NO. FD-1009) Repair/replacement of following parts of ''TABLE STEEL 900 x 900 x 760 mm" complete all as specified and shown on drawing :- Top using of 18/19mm thick prelaminated particle board Make (Archid/Novapan/Eco) ISI marked exterior grade and 6mm thick Teak edging all around.

Two coat spray painting to article with synthetic enamel paint OG/ as per specified colour in drawing. Make .Berger/Asian/Narolac including preparation of surface after cleaning dirt/dust with emery paper complete all as directed and specified.

M&L for Two coat spray painting with synthetic enamel paint OG/ as per specified colour in drawing of old Table dining OR steel (Drg No FD-2165(M)). Make .Berger/Asian/Narolac including preparation of surface after cleaning dirt/dust with emery paper complete all as directed and specified.

Form with Back /without back (Drg No FD-77(M),78(M))

Rack steel 6 tier 1905x915x305mm (Drg No FD-1038)

Rack steel 3 tier 990x915x475.5mm (Drg No FD-1038)

Rack steel 3/4 space (Drg No FD-97 / 1023)

Rack shoe steel. (Drg No FD/E6/MAP/01(R))

Trestle store room steel (Drg No FD-347,1043,86(M))

Stool Steel (Drg No FD-81(M))

Desk steel. (Drg No FD- 107, 124 & 125)

Modern Enterprises

Arneja Builders