Construction of New Model Degree College under PM-USHA 2025-26 at Pherzawl Model Degree College, Pherzawl, Manipur.

Amount

SH: Construction of Administrative Building

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (i) All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (a) 1:4:8 (1 cement : 4 coarse sand : 8graded stone aggregate 40 mm nominal size).

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (A) 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).

Reinforced cement concrete work in beams, suspended floors, roof having slope up to 15 degree landing balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of shuttering and reinforcement. with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. (i) Thermo-Mechanically Treated bars

Centering and shuttering including strutting, propping etc. and removal of form for

(a) Foundation, footing, bases of columns etc. and mass concrete.

(b) Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick

(c) Columns, Pillars, Piers, Abutments, Posts and Struts

(d) Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick

(f) Stairs, (excluding landings) except spiral-staircases

Brick work with 1st class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

Half brick masonry with 1st class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in : Cement mortar 1:3 (1 cement : 3 coarse sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). A) Local best quality Uningthou wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked MS butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge..Local best quality Teak wood 35 mm thick shutters

P/F teak wood lipping of size 25 x 3 mm in pelmet

Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate with two chromium plated brass brackets fixed with C.P brass screws and wooden plugs, etc wherever necessary complete. 25 mm dia

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality)

Providing and fixing bright finished brass hard drawn hooks and eyes. 150 mm

Providing and fixing M.S grills of required pattern in frames of windows etc with M.S flats, square or round bars etc. including priming coat with approved steel primer all complete Fixed to openings/wooden frames with rawl plugs screw etc.

Providing and fixing M.S fan clamp type I or II of 16 mm dia M.S bar bent to shape with hooked ends in RCC slabs, beams during laying including painting exposed portion of the loop, all as per standard design complete.

12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)

15 mm cement plaster on rough side of of single or half brick wall of mix 1:4 (1 cement : 4 coarse sand)

15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. (i) Size of Tile 1000x1000 mm

Tile work in skirting, risers of steps and dado (upto 2 m height) over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete. Marble tiles (poilished) Raj Nagar 8 mm thick

Extra for prefinished nosing of treads of steps of marble stone

Providing and fixing 75 mm x 60 mm rounded hand rails in straight lengths complete in Uningthou wood.

Providing and fixing 75 mm x 60 mm Uningthou caps turned to match the hand rails & mitred in i/c hand rail screws & dowels (dia of cap to be twice the width of the hand rail 75mm x 60mm).

Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood).

Floor painting with floor enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work.

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (i) 300 x 16 mm

Providing and fixing bright finished brass tower bolts (Barrel type) with necessary screws etc. complete (i) 250 x 10 mm

(ii) 150 x 10 mm

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (i) 125 mm

Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Makrana white second quality

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (i) Hot finished welded type tubes

Providing and fixing precoated galvanised iron profile sheets (sizes, shape and pitch of corrugation as approved by Enginner-in-charge) with zinc coating 120 grams per IS : 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 meter or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling/ self tapping screwsdrilling/self tapping screws of size (5.5x 55mm) with EPDM seal coated upto any pitch in horizontal/ vertical of curved surfaces, excluding the cost of purlins, rafter and trusses and including cutting to size and shape wherever required with (a) Precoated galvanised iron profile sheets 0.50mm thick

Providing and fixing precoated galvanised steel sheet roofing accessories, Zinc coating 120gsm as per IS: 277 in 240mpa stell grade, 5-7 nicrons epoxy primer on both side of the sheet and polyster top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolt and nuts and or G.I. seam bolts and nuts, G.I plain and bitumen washers complete. Riges plain (500-600mm) (a) Precoated galvanised iron profile sheets 0.50mm thick

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. Local best quality Tolhao

Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately) : Flame retardant face insulating board 12 mm thick

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

SH: Providing W.S. & S.I. for Administrative Building

Earth work in excavated by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drain (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m.

(i) All kinds of soil

Filling available excavated earth(excluding rock) in trenches, pinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidation each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m.

Providing and laying cement concrete in foundation plinth i/c the cost of centering and shuttering.

(a)1:4:8 ( 1 Cement: 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

(b)1:3:6 ( 1 Cement: 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

RCC work in beams, suspended floors, roofs having slope upto 15 landings, balconies, shelves, chajjas, lintels, bands, plian window sills, staircases ends spiral staircase upto floor five level excluding cost of centering, shuttering, finishing and reinforcement.

a) 1:1.5:3 (1 cement : 1.5 coarse sand :3 graded stone aggregate 20mm nominal size.)

Providing and laying specific grade of RCC, excluding the cost of centering, shutter, finishing and reinforcement All work upto plinth level.

a) 1:1.5:3 (1 cement : 1.5 coarse sand :3 graded stone aggregate 20mm nominal size.)

RCC work in wall (any thickness), including attached pilasters, butressess, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centering, shuttering, finishing and reinforcement.

a) 1:1.5:3 (1 cement : 1.5 coarse sand :3 graded stone aggregate 20mm nominal size.)

Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete up to plinth level.

Thermo-Mechanically Treated bars

Centering and shuttering including strutting, propping etc and removal of form for :

a) Foundation footings, bases of columns etc. and mass concrete.

b)Walls (any thicness) including attached pilasters, buttresses, plinth and string courses etc.

c) suspended floors, roofs, landings, balconies and access platform

Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in.

Cement mortar 1 : 3 (1 cement : 3 coarse sand)

Brick work with Ist class common burnt clay F.P.S.(non modular) bricks in superstructure above plinth level upto floor V level in all shapes and sizes in :

Cement mortar 1:4 (1 cement: 4 coarse sand)

Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc. complete.

Hot finished welded type tubes

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with

Precoated galvanised iron profile sheets 0.50 mm thick

Providing and fixing precoated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete :

Precoated galvanised iron profile sheets 0.50 mm thick

15 mm cement plaster on rough side of single or half brick wall of mix:-

1:4 (1 cement : 4 fine sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately :

Local best quality Tolhao wood.

P/F 20mm thick battened door and window shutters with necessary ledges and braces 25mm i/c bright finished or/and black enamelled M.S. Iron T-hinges with necessary screws

Local best quality Tolhao wood.

Providing and fixing ISI marked oxidised M.S.sliding door bolts with screws etc. complete

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :

Applying primimg coat with ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:

Two or more coats on new work

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade

New work (two or more coats) over and including priming coat with cement primer:-

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :

W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. bra§s waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:

White Vitreofs China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.

(a) 15 mm nominal dia

Providing and fixing mirror of superior glass (of approved quality) and.of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :

Rectangular shape 1500x450 mm

Providing and fixing toilet paper, holder C.P. brass

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

600 mm long towel rail with total length of 645 mm,width 78 mm and effective height of 88 mm, weighing, not less than 190 gms.

Providing and fixing C.P. brass bib cock of approved quality conforming, to IS:8931 :

15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.

15 mm nominal bore .

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete.

10 litre capacity - White

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete.:

White solid plastic seat with lid

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete,

Flexible pipe 32 mm dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain s brass threaded fittings, including fixing the pipe with clamps ,at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC, solvent cement and testing of joints complete as per direction of Engineer in charge. Internal work.

32 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stabijity for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with One step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work.

32 mm nominal outer dia pipe

Providing and fixing G.l. pipes complete with G.l, fittings including trenching’and refilling etc. External work.

80 mm nominal outer dia Pipes

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

P/F Motor pump (1H.P) i/c fitting.

SH: Providing IEI for Administrative Building

Wiring for light point / Fan point/ Exhaust Fan point / Call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in surface / recessed PVC conduct with modualr type switch, modualr plate suitable size GI box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc. as reqd.

(i) Group A

(ii) Group B

(iii) Group C

Wiring for light point / power plug with 2 x4mm 2 FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit along with 1no. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc. as reqd.

Wiring power plug with 2 x 6mm2 FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit along with 1 no. of 6mm2 FR PVC insulated copper conductor single core cable for loop earthing etc. as reqd.

Wiring for circuit/sub main wiring along with earth wire with (the following sizes) of FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit etc. as reqd.

(i) 2x1.5mm2 + 1x1.5mm2 earth wire

(ii) 2x4mm2 + 1 x 4mm2 earth wire

(iii) 2x6mm2 + 1x6mm2 earth wire

(iv) 2x10mm2 + 1x10mm2 earth wire

S/F 63amp double pole 240 V isolater in the existing MCB DB complete with connection testing & commissioning as reqd. (Single pole)

S/F single pole 5 amp to 32 amp rating 230 V B series MCB for lightning and other load in the existing MCB DB complete with connection testing & commissioning etc. as reqd.

S/F suitable size GI box with modular plate and cover in front on surface or in recess i/c P/F 3 pin 5/6 amp modular socket out let 5/6 amp modular switch, connection painting etc. as reqd. (for light plugs to use in non-residential building)

S/F suitable size GI box with modular plate and cover in front onsurface or in recess i/c P/F 6 pin 15/16 and 5/6 amp modular socket out let 15/16 amp modular switch connection painting etc. as reqd.

Supplying & Fixing stepped type electronic fan regulator on the existing modular plate switch box i/c connection but excluding modular plate etc. as reqd.

S/F brass battern/angle holder i/c connection ets as.

S/F (following way) single/double pole and neutral, sheet steel MCCB distribution board 240 V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphatized and powder painted including earthing etc. as reqd.

(i) 8 way single door

Earthing with copper earth plate 600mm x 600mm x 6mm thick i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) as reqd.

Extra for using salt and charcoal for GI or copper plate earth lectrode as reqd.

S/L 8 SWG copper wire at 0.50m below ground level for conductor earth eledroide i/c coldering etc. as reqd.

P/F 4mm dia copper wire on surface or in recessed for loop earthing as reqd.

S/F 48" sweep (1200mm) A.C ceiling fan complete with down rod, canopy,3(three) blades but without regulator etc. as reqd. (Make Bajaj/Usha or similar)

10 sq.mm ISI marked FR PVC insulated, single core copper conductor cable

S/F 60/63 amp porcelian fuce unit (Kit kat)

S/F (following rating) four pole 240V isolator in the existing MCB DB complete with connection, testing and commissioning as reqd.

Supply & fixing of Metal boxes with phenolic laminated sheet cover in front

(i) 250mm x 300mm x 100mm deep

S/F Bus bar chamber with 4 strips copper bus bar of length 300mm suitable for 100 amp capacity complete with all accessories i/c connection earthing the body etc. as reqd.

S/F 305mm sweep exhaust fan complete with all accessories i/c connection etc. as reqd.

Erection of steel tubular pole of length not less than 8 mtrs but not exceeding 10 mtrs in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone agtt. 40mm nominal size) foundation i/c excavation & refilling etc. as reqd.

8 meter long steel tubular pole (410 SP-14)

S/F 18 Ceiling surface fitting

S/F change over 100amp

S/F 9 watt LED lamp make Havells

SH: Construction of Staff Quarters

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (i) All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (a) 1:4:8 (1 cement : 4 coarse sand : 8graded stone aggregate 40 mm nominal size).

Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 ( 1 cement : 2 course sand: 4 graded stone aggrt. 12.5 mm nominal size)

Extra for prviding and mixing water proofing material in cement concrete work @ 1 kg per 50 kg of cement

Applying a coat of residual petroleum bitumen of grade VG-10 of approved quality using 1.7 kg per square metre on dam proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (A) 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).

Reinforced cement concrete work in beams, suspended floors, roof having slope up to 15 degree landing balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of shuttering and reinforcement. with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. (i) Thermo-Mechanically Treated bars

Centering and shuttering including strutting, propping etc. and removal of form for

(a) Foundation, footing, bases of columns etc. and mass concrete.

(b) Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick

(c) Columns, Pillars, Piers, Abutments, Posts and Struts

(d) Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick

(e Edges of slabs and bricks in floors and walls. (Under 20 cm. Wide).

(f) Stairs, (excluding landings) except spiral-staircases

Brick work with 1st class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

Half brick masonry with 1st class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in : Cement mortar 1:3 (1 cement : 3 coarse sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). A) Local best quality Teak wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked MS butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge..Local best quality Teak wood 35 mm thick shutters

P/F teak wood lipping of size 25 x 3 mm in pelmet

Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate with two chromium plated brass brackets fixed with C.P brass screws and wooden plugs, etc wherever necessary complete. 25 mm dia

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality)

Providing and fixing bright finished brass hard drawn hooks and eyes. 150 mm

Providing and fixing M.S grills of required pattern in frames of windows etc with M.S flats, square or round bars etc. including priming coat with approved steel primer all complete Fixed to openings/wooden frames with rawl plugs screw etc.

Providing and fixing M.S fan clamp type I or II of 16 mm dia M.S bar bent to shape with hooked ends in RCC slabs, beams during laying including painting exposed portion of the loop, all as per standard design complete.

Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. as required. In stringers, treads, landing etc. of stair cases including use of chequered plate whenever required, all complete.

12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)

15 mm cement plaster on rough side of of single or half brick wall of mix 1:4 (1 cement : 4 coarse sand)

15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. (i) Size of Tile 1000x1000 mm

Tile work in skirting, risers of steps and dado (upto 2 m height) over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete. Marble tiles (poilished) Raj Nagar 8 mm thick

Extra for prefinished nosing of treads of steps of marble stone

Providing and fixing 75 mm x 60 mm rounded hand rails in straight lengths complete in Uningthou wood.

Providing and fixing 75 mm x 60 mm Uningthou caps turned to match the hand rails & mitred in i/c hand rail screws & dowels (dia of cap to be twice the width of the hand rail 75mm x 60mm).

Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood).

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (i) 300 x 16 mm

Providing and fixing bright finished brass tower bolts (Barrel type) with necessary screws etc. complete (i) 250 x 10 mm

(ii) 150 x 10 mm

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (i) 125 mm

Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Makrana white second quality

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (i) Hot finished welded type tubes

Providing and fixing precoated galvanised iron profile sheets (sizes, shape and pitch of corrugation as approved by Enginner-in-charge) with zinc coating 120 grams per IS : 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 meter or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling/ self tapping screwsdrilling/self tapping screws of size (5.5x 55mm) with EPDM seal coated upto any pitch in horizontal/ vertical of curved surfaces, excluding the cost of purlins, rafter and trusses and including cutting to size and shape wherever required with (a) Precoated galvanised iron profile sheets 0.50mm thick

Providing and fixing precoated galvanised steel sheet roofing accessories, Zinc coating 120gsm as per IS: 277 in 240mpa stell grade, 5-7 nicrons epoxy primer on both side of the sheet and polyster top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolt and nuts and or G.I. seam bolts and nuts, G.I plain and bitumen washers complete. Riges plain (500-600mm) (a) Precoated galvanised iron profile sheets 0.50mm thick

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. Local best quality Uningthou

Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately) : Flame retardant face insulating board 12 mm thick

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

SH: Providing W.S. & S.I. for Staff Quarters

Earth work in excavated by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drain (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m.

(i) All kinds of soil

Filling available excavated earth(excluding rock) in trenches, pinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidation each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m.

Providing and laying cement concrete in foundation plinth i/c the cost of centering and shuttering.

(a)1:4:8 ( 1 Cement: 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

(b)1:3:6 ( 1 Cement: 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

RCC work in beams, suspended floors, roofs having slope upto 15 landings, balconies, shelves, chajjas, lintels, bands, plian window sills, staircases ends spiral staircase upto floor five level excluding cost of centering, shuttering, finishing and reinforcement.

a) 1:1.5:3 (1 cement : 1.5 coarse sand :3 graded stone aggregate 20mm nominal size.)

Providing and laying specific grade of RCC, excluding the cost of centering, shutter, finishing and reinforcement All work upto plinth level.

a) 1:1.5:3 (1 cement : 1.5 coarse sand :3 graded stone aggregate 20mm nominal size.)

RCC work in wall (any thickness), including attached pilasters, butressess, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centering, shuttering, finishing and reinforcement.

a) 1:1.5:3 (1 cement : 1.5 coarse sand :3 graded stone aggregate 20mm nominal size.)

Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete up to plinth level.

Thermo-Mechanically Treated bars

Centering and shuttering including strutting, propping etc and removal of form for :

a) Foundation footings, bases of columns etc. and mass concrete.

b)Walls (any thicness) including attached pilasters, buttresses, plinth and string courses etc.

c) suspended floors, roofs, landings, balconies and access platform

Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in

Cement mortar 1 : 3 (1 cement : 3 coarse sand)

Brick work with Ist class common burnt clay F.P.S.(non modular) bricks in superstructure above plinth level upto floor V level in all shapes and sizes in :

Cement mortar 1:4 (1 cement: 4 coarse sand)

Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc. complete.

Hot finished welded type tubes

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with

Precoated galvanised iron profile sheets 0.50 mm thick

Providing and fixing precoated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete :

Precoated galvanised iron profile sheets 0.50 mm thick

15 mm cement plaster on rough side of single or half brick wall of mix:-

1:4 (1 cement : 4 fine sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately :

Local best quality Tolhao wood.

P/F 20mm thick battened door and window shutters with necessary ledges and braces 25mm i/c bright finished or/and black enamelled M.S. Iron T-hinges with necessary screws

Local best quality Tolhao wood.

Providing and fixing ISI marked oxidised M.S.sliding door bolts with screws etc. complete

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :

Applying priming coat:-

With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:

Two or more coats on new work

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade

New work (two or more coats) over and including priming coat with cement primer:-

Providing and fixing water closet squating pan (indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever0 conforming to IS: 7231, with all fitting and fixtures complete, inclusing cutting, and making good the wall and floors wherever required:

White vitreous China orissa pattern W.C. pan of size 580x440 mm with intergral type foot rests.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :

W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. bra§s waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:

White Vitreofs China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.

Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet:

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.

(a) 15 mm nominal dia

Providing and fixing mirror of superior glass (of approved quality) and.of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :

Rectangular shape 1500x450 mm

Providing and fixing toilet paper, holder:

C.P. brass

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

600 mm long towel rail with total length of 645 mm,width 78 mm and effective height of 88 mm, weighing, not less than 190 gms.

Providing and fixing C.P. brass bib cock of approved quality conforming, to IS:8931 :

15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.

15 mm nominal bore .

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:

150 mm diameter

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete.

10 litre capacity - White

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete.:

White solid plastic seat with lid

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete,

Flexible pipe 32 mm dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain s brass threaded fittings, including fixing the pipe with clamps ,at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC, solvent cement and testing of joints complete as per direction of Engineer in charge. Internal work.

32 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stabijity for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with One step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work.

32 mm nominal outer dia pipe

Providing and fixing G.l. pipes complete with G.l, fittings including trenching’and refilling etc. External work.

80 mm nominal outer dia Pipes

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

P/F Motor pump (1H.P) i/c fitting.

SH: Providing IEI for Staff Quarters

Wiring for light point / Fan point/ Exhaust Fan point / Call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in surface / recessed PVC conduct with modualr type switch, modualr plate suitable size GI box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc. as reqd.

(i) Group A

(ii) Group B

(iii) Group C

Wiring for light point / power plug with 2 x4mm 2 FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit along with 1no. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc. as reqd.

Wiring power plug with 2 x 6mm2 FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit along with 1 no. of 6mm2 FR PVC insulated copper conductor single core cable for loop earthing etc. as reqd.

Wiring for circuit/sub main wiring along with earth wire with (the following sizes) of FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit etc. as reqd.

(i) 2x1.5mm2 + 1x1.5mm2 earth wire

(ii) 2x4mm2 + 1 x 4mm2 earth wire

(iii) 2x6mm2 + 1x6mm2 earth wire

(iv) 2x10mm2 + 1x10mm2 earth wire

S/F 63amp double pole 240 V isolater in the existing MCB DB complete with connection testing & commissioning as reqd. (Single pole)

S/F single pole 5 amp to 32 amp rating 230 V B series MCB for lightning and other load in the existing MCB DB complete with connection testing & commissioning etc. as reqd.

S/F suitable size GI box with modular plate and cover in front on surface or in recess i/c P/F 3 pin 5/6 amp modular socket out let 5/6 amp modular switch, connection painting etc. as reqd. (for light plugs to use in non-residential building)

S/F suitable size GI box with modular plate and cover in front onsurface or in recess i/c P/F 6 pin 15/16 and 5/6 amp modular socket out let 15/16 amp modular switch connection painting etc. as reqd.

Supplying & Fixing stepped type electronic fan regulator on the existing modular plate switch box i/c connection but excluding modular plate etc. as reqd.

S/F (following way) single/double pole and neutral, sheet steel MCCB distribution board 240 V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphatized and powder painted including earthing etc. as reqd.

(i) 8 way single door

Earthing with copper earth plate 600mm x 600mm x 6mm thick i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) as reqd.

Extra for using salt and charcoal for GI or copper plate earth lectrode as reqd.

S/L 8 SWG copper wire at 0.50m below ground level for conductor earth eledroide i/c coldering etc. as reqd.

P/F 4mm dia copper wire on surface or in recessed for loop earthing as reqd.

S/F 48" sweep (1200mm) A.C ceiling fan complete with down rod, canopy,3(three) blades but without regulator etc. as reqd. (Make Bajaj/Usha or similar)

10 sq.mm ISI marked FR PVC insulated, single core copper conductor cable

S/F 60/63 amp porcelian fuce unit (Kit kat)

S/F (following rating) four pole 240V isolator in the existing MCB DB complete with connection, testing and commissioning as reqd.

Supply & fixing of Metal boxes with phenolic laminated sheet cover in front

(i) 250mm x 300mm x 100mm deep

S/F Bus bar chamber with 4 strips copper bus bar of length 300mm suitable for 100 amp capacity complete with all accessories i/c connection earthing the body etc. as reqd.

Erection of steel tubular pole of length not less than 8 mtrs but not exceeding 10 mtrs in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone agtt. 40mm nominal size) foundation i/c excavation & refilling etc. as reqd.

8 meter long steel tubular pole (410 SP-14)

S/F 305mm sweep exhaust fan complete with all accessories i/c connection etc. as reqd.

S/F CFL bulk head luminaries deep down annodised Al. body, heat resistant prismatic glass cover. (Ref 021240, BJBE -19, S - type CFL 1 X 9W)

S/F brass battern/angle holder i/c connection ets as.

S/F 9 watt LED lamp make Havells

S/F 18 Ceiling fitting surface

S/F change over 100 amp

S/F Orient wall mounted fan Tornado 450 mm

SH: Construction of Hostel

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (i) All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (a) 1:4:8 (1 cement : 4 coarse sand : 8graded stone aggregate 40 mm nominal size).

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (A) 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).

Reinforced cement concrete work in beams, suspended floors, roof having slope up to 15 degree landing balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of shuttering and reinforcement. with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. (i) Thermo-Mechanically Treated bars

Centering and shuttering including strutting, propping etc. and removal of form for

(a) Foundation, footing, bases of columns etc. and mass concrete.

(b) Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick

(c) Columns, Pillars, Piers, Abutments, Posts and Struts

(d) Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick

(f) Stairs, (excluding landings) except spiral-staircases

Brick work with 1st class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

Half brick masonry with 1st class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in : Cement mortar 1:3 (1 cement : 3 coarse sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). A) Local best quality Uningthou wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked MS butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge..Local best quality Teak wood 35 mm thick shutters

P/F teak wood lipping of size 25 x 3 mm in pelmet

Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate with two chromium plated brass brackets fixed with C.P brass screws and wooden plugs, etc wherever necessary complete. 25 mm dia

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality)

Providing and fixing bright finished brass hard drawn hooks and eyes. 150 mm

Providing and fixing M.S grills of required pattern in frames of windows etc with M.S flats, square or round bars etc. including priming coat with approved steel primer all complete Fixed to openings/wooden frames with rawl plugs screw etc.

Providing and fixing M.S fan clamp type I or II of 16 mm dia M.S bar bent to shape with hooked ends in RCC slabs, beams during laying including painting exposed portion of the loop, all as per standard design complete.

Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. as required. In stringers, treads, landing etc. of stair cases including use of chequered plate whenever required, all complete.

12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate

15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. (i) Size of Tile 1000x1000 mm

Tile work in skirting, risers of steps and dado (upto 2 m height) over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete. Marble tiles (poilished) Raj Nagar 8 mm thick

Extra for prefinished nosing of treads of steps of marble stone

Providing and fixing 75 mm x 60 mm rounded hand rails in straight lengths complete in Uningthou wood.

Providing and fixing 75 mm x 60 mm Uningthou caps turned to match the hand rails & mitred in i/c hand rail screws & dowels (dia of cap to be twice the width of the hand rail 75mm x 60mm).

Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood).

Floor painting with floor enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work.

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (i) 300 x 16 mm

Providing and fixing bright finished brass tower bolts (Barrel type) with necessary screws etc. complete (i) 250 x 10 mm

(ii) 150 x 10 mm

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (i) 125 mm

Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Makrana white second quality

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (i) Hot finished welded type tubes

Providing and fixing precoated galvanised iron profile sheets (sizes, shape and pitch of corrugation as approved by Enginner-in-charges) with zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 meter or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of sizes (5.5x 55mm) with EPDM seal complete upto any pitch in horizontal/vertical or curved surface, excluding the cost of purlins rafter and trusses and including cutting to size and shape wherever required with

12.46.1 Precoated galvanised iron profile sheets 0.50mm thick

Providing and fixing precoated galvanised steel sheet roofing accessories,Zinc coating 120gsm as per IS: 277 in 340mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drelling/ self tapping screws or with polymer coat J or L hooks, bolts and nuts and or G.I seam bolts and nuts, G.I plain and bitumen washers complete: Ridges plain (500-600).

Precoated galvanised iron profile sheets 0.50 mm thick.

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. Local best quality Uningthou

Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately) : Flame retardant face insulating board 12 mm thick

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

SH: Providing W.S. & S.I. for Hostel

Earth work in excavated by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drain (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m.

(i) All kinds of soil

Filling available excavated earth(excluding rock) in trenches, pinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidation each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m.

Providing and laying cement concrete in foundation plinth i/c the cost of centering and shuttering.

(a)1:4:8 ( 1 Cement: 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

(b)1:3:6 ( 1 Cement: 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

RCC work in beams, suspended floors, roofs having slope upto 15 landings, balconies, shelves, chajjas, lintels, bands, plian window sills, staircases ends spiral staircase upto floor five level excluding cost of centering, shuttering, finishing and reinforcement.

a) 1:1.5:3 (1 cement : 1.5 coarse sand :3 graded stone aggregate 20mm nominal size.)

Providing and laying specific grade of RCC, excluding the cost of centering, shutter, finishing and reinforcement All work upto plinth level.

a) 1:1.5:3 (1 cement : 1.5 coarse sand :3 graded stone aggregate 20mm nominal size.)

RCC work in wall (any thickness), including attached pilasters, butressess, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centering, shuttering, finishing and reinforcement.

a) 1:1.5:3 (1 cement : 1.5 coarse sand :3 graded stone aggregate 20mm nominal size.)

Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete up to plinth level.

Thermo-Mechanically Treated bars

Centering and shuttering including strutting, propping etc and removal of form for :

a) Foundation footings, bases of columns etc. and mass concrete.

b)Walls (any thicness) including attached pilasters, buttresses, plinth and string courses etc.

c) suspended floors, roofs, landings, balconies and access platform

Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in

Cement mortar 1 : 3 (1 cement : 3 coarse sand)

Brick work with Ist class common burnt clay F.P.S.(non modular) bricks in superstructure above plinth level upto floor V level in all shapes and sizes in :

Cement mortar 1:4 (1 cement: 4 coarse sand)

Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc. complete.

Hot finished welded type tubes

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with

Precoated galvanised iron profile sheets 0.50 mm thick

Providing and fixing precoated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete :

Precoated galvanised iron profile sheets 0.50 mm thick

15 mm cement plaster on rough side of single or half brick wall of mix:-

1:4 (1 cement : 4 fine sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately :

Local best quality Tolhao wood.

P/F 20mm thick battened door and window shutters with necessary ledges and braces 25mm i/c bright finished or/and black enamelled M.S. Iron T-hinges with necessary screws

Local best quality Tolhao wood.

Providing and fixing ISI marked oxidised M.S.sliding door bolts with screws etc. complete

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :

Applying priming coat:-

With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:

Two or more coats on new work

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade

New work (two or more coats) over and including priming coat with cement primer:-

Providing and fixing water closet squating pan (indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever0 conforming to IS: 7231, with all fitting and fixtures complete, inclusing cutting, and making good the wall and floors wherever required:

White vitreous China orissa pattern W.C. pan of size 580x440 mm with intergral type foot rests.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :

W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. bra§s waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:

White Vitreofs China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.

Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet:

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.

(a) 15 mm nominal dia

Providing and fixing mirror of superior glass (of approved quality) and.of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :

Rectangular shape 1500x450 mm

Providing and fixing toilet paper, holder:

C.P. brass

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

600 mm long towel rail with total length of 645 mm,width 78 mm and effective height of 88 mm, weighing, not less than 190 gms.

Providing and fixing C.P. brass bib cock of approved quality conforming, to IS:8931 :

15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.

15 mm nominal bore .

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:

150 mm diameter

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete.

10 litre capacity - White

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete.:

White solid plastic seat with lid

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete,

Flexible pipe 32 mm dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain s brass threaded fittings, including fixing the pipe with clamps ,at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC, solvent cement and testing of joints complete as per direction of Engineer in charge. Internal work.

32 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stabijity for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with One step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work.

32 mm nominal outer dia pipe

Providing and fixing G.l. pipes complete with G.l, fittings including trenching’and refilling etc. External work.

80 mm nominal outer dia Pipes

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

P/F Motor pump (1H.P) i/c fitting.

SH: Providing IEI for Hostel

Wiring for light point / Fan point/ Exhaust Fan point / Call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in surface / recessed PVC conduct with modualr type switch, modualr plate suitable size GI box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc. as reqd.

(i) Group A

(ii) Group B

(iii) Group C

Wiring for light point / power plug with 2 x4mm 2 FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit along with 1no. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc. as reqd.

Wiring power plug with 2 x 6mm2 FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit along with 1 no. of 6mm2 FR PVC insulated copper conductor single core cable for loop earthing etc. as reqd.

Wiring for circuit/sub main wiring along with earth wire with (the following sizes) of FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit etc. as reqd.

(i) 2x1.5mm2 + 1x1.5mm2 earth wire

(ii) 2x4mm2 + 1 x 4mm2 earth wire

(iii) 2x6mm2 + 1x6mm2 earth wire

(iv) 2x10mm2 + 1x10mm2 earth wire

S/F 63amp double pole 240 V isolater in the existing MCB DB complete with connection testing & commissioning as reqd. (Single pole)

S/F single pole 5 amp to 32 amp rating 230 V B series MCB for lightning and other load in the existing MCB DB complete with connection testing & commissioning etc. as reqd.

S/F suitable size GI box with modular plate and cover in front on surface or in recess i/c P/F 3 pin 5/6 amp modular socket out let 5/6 amp modular switch, connection painting etc. as reqd. (for light plugs to use in non-residential building)

S/F suitable size GI box with modular plate and cover in front onsurface or in recess i/c P/F 6 pin 15/16 and 5/6 amp modular socket out let 15/16 amp modular switch connection painting etc. as reqd.

Supplying & Fixing stepped type electronic fan regulator on the existing modular plate switch box i/c connection but excluding modular plate etc. as reqd.

S/F brass battern/angle holder i/c connection ets as.

S/F (following way) single/double pole and neutral, sheet steel MCCB distribution board 240 V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphatized and powder painted including earthing etc. as reqd.

(i) 8 way single door

Earthing with copper earth plate 600mm x 600mm x 6mm thick i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) as reqd.

Extra for using salt and charcoal for GI or copper plate earth lectrode as reqd.

S/L 8 SWG copper wire at 0.50m below ground level for conductor earth eledroide i/c coldering etc. as reqd.

P/F 4mm dia copper wire on surface or in recessed for loop earthing as reqd.

S/F 48" sweep (1200mm) A.C ceiling fan complete with down rod, canopy,3(three) blades but without regulator etc. as reqd. (Make Bajaj/Usha or similar)

10 sq.mm ISI marked FR PVC insulated, single core copper conductor cable

S/F 60/63 amp porcelian fuce unit (Kit kat)

S/F (following rating) four pole 240V isolator in the existing MCB DB complete with connection, testing and commissioning as reqd.

Supply & fixing of Metal boxes with phenolic laminated sheet cover in front

(i) 250mm x 300mm x 100mm deep

S/F Bus bar chamber with 4 strips copper bus bar of length 300mm suitable for 100 amp capacity complete with all accessories i/c connection earthing the body etc. as reqd.

S/F 305mm sweep exhaust fan complete with all accessories i/c connection etc. as reqd.

S/F CFL bulk head luminaries deep down annodised Al. body, heat resistant prismatic glass cover. (Ref 021240, BJBE -19, S - type CFL 1 X 9W)

Erection of steel tubular pole of length not less than 8 mtrs but not exceeding 10 mtrs in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone agtt. 40mm nominal size) foundation i/c excavation & refilling etc. as reqd.

8 meter long steel tubular pole (410 SP-14)

S/F 18 Ceiling surface fitting

S/F 9 watt LED lamp make Havells

SH: Construction of Multipurpose Hall

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (i) All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (a) 1:4:8 (1 cement : 4 coarse sand : 8graded stone aggregate 40 mm nominal size).

Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 ( 1 cement : 2 course sand: 4 graded stone aggrt. 12.5 mm nominal size)

Extra for prviding and mixing water proofing material in cement concrete work @ 1 kg per 50 kg of cement

Applying a coat of residual petroleum bitumen of grade VG-10 of approved quality using 1.7 kg per square metre on dam proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (A) 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).

Reinforced cement concrete work in beams, suspended floors, roof having slope up to 15 degree landing balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of shuttering and reinforcement. with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. (i) Thermo-Mechanically Treated bars

Centering and shuttering including strutting, propping etc. and removal of form for

(a) Foundation, footing, bases of columns etc. and mass concrete.

(b) Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick

(c) Columns, Pillars, Piers, Abutments, Posts and Struts

(d) Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick

(e Edges of slabs and bricks in floors and walls. (Under 20 cm. Wide).

Brick work with 1st class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

Half brick masonry with 1st class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in : Cement mortar 1:3 (1 cement : 3 coarse sand) A) Ground floor.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). A) Local best quality Teak wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked MS butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge..Local best quality Teak wood 35 mm thick shutters

P/F teak wood lipping of size 25 x 3 mm in pelmet

Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate with two chromium plated brass brackets fixed with C.P brass screws and wooden plugs, etc wherever necessary complete. 25 mm dia

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality)

Providing and fixing bright finished brass hard drawn hooks and eyes. 150 mm

Providing and fixing M.S grills of required pattern in frames of windows etc with M.S flats, square or round bars etc. including priming coat with approved steel primer all complete Fixed to openings/wooden frames with rawl plugs screw etc.

Providing and fixing M.S fan clamp type I or II of 16 mm dia M.S bar bent to shape with hooked ends in RCC slabs, beams during laying including painting exposed portion of the loop, all as per standard design complete.

Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. as required. In stringers, treads, landing etc. of stair cases including use of chequered plate whenever required, all complete.

12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)

15 mm cement plaster on rough side of of single or half brick wall of mix 1:4 (1 cement : 4 coarse sand)

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate

15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall.

Providing and fixing 75 mm x 60 mm rounded hand rails in straight lengths complete in Uningthou wood.

Providing and fixing 75 mm x 60 mm Uningthou caps turned to match the hand rails & mitred in i/c hand rail screws & dowels (dia of cap to be twice the width of the hand rail 75mm x 60mm).

Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood).

Floor painting with floor enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work.

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (i) 300 x 16 mm

Providing and fixing bright finished brass tower bolts (Barrel type) with necessary screws etc. complete (i) 250 x 10 mm

(ii) 150 x 10 mm

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (i) 125 mm

Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Makrana white second quality

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (i) Hot finished welded type tubes.

Providing corrugated G.S sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks , bolts and nuts 8 mm diameter with bitumen and G.I limpet washers or with G.I limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape whenever required. 0.80 mm thick with zinc coating not less than 275 gm/m2

Providing ridges or hips of width 60 cm over all width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.Ilimpet and bitumen washers complete. 0.80 mm thick with zinc coating not less than 275 gm/m2

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. Local best quality Uningthou

Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately) : Flame retardant face insulating board 12 mm thick

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

SH: Providing W.S. & S.I. Multipurpose Hall

Earth work in excavated by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drain (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m.

(i) All kinds of soil

Filling available excavated earth(excluding rock) in trenches, pinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidation each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m.

Providing and laying cement concrete in foundation plinth i/c the cost of centering and shuttering.

(a)1:4:8 ( 1 Cement: 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

(b)1:3:6 ( 1 Cement: 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

RCC work in beams, suspended floors, roofs having slope upto 15 landings, balconies, shelves, chajjas, lintels, bands, plian window sills, staircases ends spiral staircase upto floor five level excluding cost of centering, shuttering, finishing and reinforcement.

a) 1:1.5:3 (1 cement : 1.5 coarse sand :3 graded stone aggregate 20mm nominal size.)

Providing and laying specific grade of RCC, excluding the cost of centering, shutter, finishing and reinforcement All work upto plinth level.

a) 1:1.5:3 (1 cement : 1.5 coarse sand :3 graded stone aggregate 20mm nominal size.)

RCC work in wall (any thickness), including attached pilasters, butressess, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centering, shuttering, finishing and reinforcement.

a) 1:1.5:3 (1 cement : 1.5 coarse sand :3 graded stone aggregate 20mm nominal size.)

Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete up to plinth level.

Thermo-Mechanically Treated bars

Centering and shuttering including strutting, propping etc and removal of form for :

a) Foundation footings, bases of columns etc. and mass concrete.

b)Walls (any thicness) including attached pilasters, buttresses, plinth and string courses etc.

c) suspended floors, roofs, landings, balconies and access platform

Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in

Cement mortar 1 : 3 (1 cement : 3 coarse sand)

Brick work with Ist class common burnt clay F.P.S.(non modular) bricks in superstructure above plinth level upto floor V level in all shapes and sizes in :

Cement mortar 1:4 (1 cement: 4 coarse sand)

Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc. complete.

Hot finished welded type tubes

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with

Precoated galvanised iron profile sheets 0.50 mm thick

Providing and fixing precoated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete :

Precoated galvanised iron profile sheets 0.50 mm thick

15 mm cement plaster on rough side of single or half brick wall of mix:-

1:4 (1 cement : 4 fine sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately :

Local best quality Tolhao wood.

P/F 20mm thick battened door and window shutters with necessary ledges and braces 25mm i/c bright finished or/and black enamelled M.S. Iron T-hinges with necessary screws

Local best quality Tolhao wood.

Providing and fixing ISI marked oxidised M.S.sliding door bolts with screws etc. complete

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :

Applying priming coat:-

With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:

Two or more coats on new work

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade

New work (two or more coats) over and including priming coat with cement primer:-

Providing and fixing water closet squating pan (indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever0 conforming to IS: 7231, with all fitting and fixtures complete, inclusing cutting, and making good the wall and floors wherever required:

White vitreous China orissa pattern W.C. pan of size 580x440 mm with intergral type foot rests.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :

W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. bra§s waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:

White Vitreofs China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.

(a) 15 mm nominal dia

Providing and fixing toilet paper, holder:

C.P. brass

Providing and fixing C.P. brass bib cock of approved quality conforming, to IS:8931 :

15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.

15 mm nominal bore .

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete.

10 litre capacity - White

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete.:

White solid plastic seat with lid

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete,

Flexible pipe 32 mm dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain s brass threaded fittings, including fixing the pipe with clamps ,at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC, solvent cement and testing of joints complete as per direction of Engineer in charge. Internal work.

32 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stabijity for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with One step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work.

32 mm nominal outer dia pipe

Providing and fixing G.l. pipes complete with G.l, fittings including trenching’and refilling etc. External work.

80 mm nominal outer dia Pipes

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

P/F Motor pump (1H.P) i/c fitting.

SH: Providing IEI for Multipurpose Hall

Wiring for light point / Fan point/ Exhaust Fan point / Call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in surface / recessed PVC conduct with modualr type switch, modualr plate suitable size GI box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc. as reqd.

(i) Group A

(ii) Group B

(iii) Group C

Wiring for light point / power plug with 2 x4mm 2 FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit along with 1no. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc. as reqd.

Wiring power plug with 2 x 6mm2 FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit along with 1 no. of 6mm2 FR PVC insulated copper conductor single core cable for loop earthing etc. as reqd.

Wiring for circuit/sub main wiring along with earth wire with (the following sizes) of FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit etc. as reqd.

(i) 2x1.5mm2 + 1x1.5mm2 earth wire

(ii) 2x4mm2 + 1 x 4mm2 earth wire

(iii) 2x6mm2 + 1x6mm2 earth wire

(iv) 2x10mm2 + 1x10mm2 earth wire

S/F 63amp double pole 240 V isolater in the existing MCB DB complete with connection testing & commissioning as reqd. (Single pole)

S/F single pole 5 amp to 32 amp rating 230 V B series MCB for lightning and other load in the existing MCB DB complete with connection testing & commissioning etc. as reqd.

S/F suitable size GI box with modular plate and cover in front on surface or in recess i/c P/F 3 pin 5/6 amp modular socket out let 5/6 amp modular switch, connection painting etc. as reqd. (for light plugs to use in non-residential building)

S/F suitable size GI box with modular plate and cover in front onsurface or in recess i/c P/F 6 pin 15/16 and 5/6 amp modular socket out let 15/16 amp modular switch connection painting etc. as reqd.

Supplying & Fixing stepped type electronic fan regulator on the existing modular plate switch box i/c connection but excluding modular plate etc. as reqd.

S/F brass battern/angle holder i/c connection etc. as

S/F (following way) single/double pole and neutral, sheet steel MCCB distribution board 240 V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphatized and powder painted including earthing etc. as reqd.

(i) 8 way single door

Earthing with copper earth plate 600mm x 600mm x 6mm thick i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) as reqd.

Extra for using salt and charcoal for GI or copper plate earth lectrode as reqd.

S/L 8 SWG copper wire at 0.50m below ground level for conductor earth eledroide i/c coldering etc. as reqd.

P/F 4mm dia copper wire on surface or in recessed for loop earthing as reqd.

S/F 48" sweep (1200mm) A.C ceiling fan complete with down rod, canopy,3(three) blades but without regulator etc. as reqd. (Make Bajaj/Usha or similar)

10 sq.mm ISI marked FR PVC insulated, single core copper conductor cable

S/F 60/63 amp porcelian fuce unit (Kit kat)

S/F (following rating) four pole 240V isolator in the existing MCB DB complete with connection, testing and commissioning as reqd.

Supply & fixing of Metal boxes with phenolic laminated sheet cover in front

(i) 250mm x 300mm x 100mm deep

S/F Bus bar chamber with 4 strips copper bus bar of length 300mm suitable for 100 amp capacity complete with all accessories i/c connection earthing the body etc. as reqd.

Erection of steel tubular pole of length not less than 8 mtrs but not exceeding 10 mtrs in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone agtt. 40mm nominal size) foundation i/c excavation & refilling etc. as reqd.

8 meter long steel tubular pole (410 SP-14)

S/F 305mm sweep exhaust fan complete with all accessories i/c connection etc. as reqd.

S/F CFL bulk head luminaries deep down annodised Al. body, heat resistant prismatic glass cover. (Ref 021240, BJBE-19, S-type CFL 1 x 9w)

S/F 18 WCeiling surface fitting

S/F Orient wall mounted fan Tornado 450mm

S/F 20W LED tube penasonic

S/F change over 100 amp

S/F 9W LED Bulb

SH: Construction of Academic Building

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (i) All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (a) 1:4:8 (1 cement : 4 coarse sand : 8graded stone aggregate 40 mm nominal size).

Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 ( 1 cement : 2 course sand: 4 graded stone aggrt. 12.5 mm nominal size)

Extra for prviding and mixing water proofing material in cement concrete work @ 1 kg per 50 kg of cement

Applying a coat of residual petroleum bitumen of grade VG-10 of approved quality using 1.7 kg per square metre on dam proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (A) 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).

Reinforced cement concrete work in beams, suspended floors, roof having slope up to 15 degree landing balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of shuttering and reinforcement. with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. (i) Thermo-Mechanically Treated bars

Centering and shuttering including strutting, propping etc. and removal of form for

(a) Foundation, footing, bases of columns etc. and mass concrete.

(b) Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick

(c) Columns, Pillars, Piers, Abutments, Posts and Struts

(d) Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick

(e Edges of slabs and bricks in floors and walls. (Under 20 cm. Wide).

(f) Stairs, (excluding landings) except spiral-staircases

Brick work with 1st class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

Half brick masonry with 1st class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in : Cement mortar 1:3 (1 cement : 3 coarse sand) A) Ground floor.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). A) Local best quality Teak wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked MS butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge..Local best quality Teak wood 35 mm thick shutters

P/F teak wood lipping of size 25 x 3 mm in pelmet

Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate with two chromium plated brass brackets fixed with C.P brass screws and wooden plugs, etc wherever necessary complete. 25 mm dia

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality)

Providing and fixing bright finished brass hard drawn hooks and eyes. 150 mm

Providing and fixing M.S grills of required pattern in frames of windows etc with M.S flats, square or round bars etc. including priming coat with approved steel primer all complete Fixed to openings/wooden frames with rawl plugs screw etc.

Providing and fixing M.S fan clamp type I or II of 16 mm dia M.S bar bent to shape with hooked ends in RCC slabs, beams during laying including painting exposed portion of the loop, all as per standard design complete.

Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. as required. In stringers, treads, landing etc. of stair cases including use of chequered plate whenever required, all complete.

12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)

15 mm cement plaster on rough side of of single or half brick wall of mix 1:4 (1 cement : 4 coarse sand)

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate

15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall.

Providing and fixing 75 mm x 60 mm rounded hand rails in straight lengths complete in Uningthou wood.

Providing and fixing 75 mm x 60 mm Uningthou caps turned to match the hand rails & mitred in i/c hand rail screws & dowels (dia of cap to be twice the width of the hand rail 75mm x 60mm).

Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood).

Floor painting with floor enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work.

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (i) 300 x 16 mm

Providing and fixing bright finished brass tower bolts (Barrel type) with necessary screws etc. complete (i) 250 x 10 mm

(ii) 150 x 10 mm

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (i) 125 mm

Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Makrana white second quality

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

SH: Providing W.S. & S.I. for Academic Building

Earth work in excavated by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drain (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m.

(i) All kinds of soil

Filling available excavated earth(excluding rock) in trenches, pinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidation each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m.

Providing and laying cement concrete in foundation plinth i/c the cost of centering and shuttering.

(a)1:4:8 ( 1 Cement: 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

(b)1:3:6 ( 1 Cement: 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

RCC work in beams, suspended floors, roofs having slope upto 15 landings, balconies, shelves, chajjas, lintels, bands, plian window sills, staircases ends spiral staircase upto floor five level excluding cost of centering, shuttering, finishing and reinforcement.

a) 1:1.5:3 (1 cement : 1.5 coarse sand :3 graded stone aggregate 20mm nominal size.)

Providing and laying specific grade of RCC, excluding the cost of centering, shutter, finishing and reinforcement All work upto plinth level.

a) 1:1.5:3 (1 cement : 1.5 coarse sand :3 graded stone aggregate 20mm nominal size.)

RCC work in wall (any thickness), including attached pilasters, butressess, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centering, shuttering, finishing and reinforcement.

a) 1:1.5:3 (1 cement : 1.5 coarse sand :3 graded stone aggregate 20mm nominal size.)

Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete up to plinth level.

Thermo-Mechanically Treated bars

Centering and shuttering including strutting, propping etc and removal of form for :

a) Foundation footings, bases of columns etc. and mass concrete.

b)Walls (any thicness) including attached pilasters, buttresses, plinth and string courses etc.

c) suspended floors, roofs, landings, balconies and access platform

Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in

Cement mortar 1 : 3 (1 cement : 3 coarse sand)

Brick work with Ist class common burnt clay F.P.S.(non modular) bricks in superstructure above plinth level upto floor V level in all shapes and sizes in :

Cement mortar 1:4 (1 cement: 4 coarse sand)

Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc. complete.

Hot finished welded type tubes

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with

Precoated galvanised iron profile sheets 0.50 mm thick

Providing and fixing precoated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete :

Precoated galvanised iron profile sheets 0.50 mm thick

15 mm cement plaster on rough side of single or half brick wall of mix:-

1:4 (1 cement : 4 fine sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately :

Local best quality Tolhao wood.

P/F 20mm thick battened door and window shutters with necessary ledges and braces 25mm i/c bright finished or/and black enamelled M.S. Iron T-hinges with necessary screws

Local best quality Tolhao wood.

Providing and fixing ISI marked oxidised M.S.sliding door bolts with screws etc. complete

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :

Applying priming coat:-

With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:

Two or more coats on new work

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade

New work (two or more coats) over and including priming coat with cement primer:-

Providing and fixing water closet squating pan (indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever0 conforming to IS: 7231, with all fitting and fixtures complete, inclusing cutting, and making good the wall and floors wherever required:

White vitreous China orissa pattern W.C. pan of size 580x440 mm with intergral type foot rests.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :

W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. bra§s waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required::

White Vitreofs China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.

(a) 15 mm nominal dia

Providing and fixing toilet paper, holder:

C.P. brass

Providing and fixing C.P. brass bib cock of approved quality conforming, to IS:8931 :

15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.

15 mm nominal bore .

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete.

10 litre capacity - White

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete.:

White solid plastic seat with lid

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete,

Flexible pipe 32 mm dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain s brass threaded fittings, including fixing the pipe with clamps ,at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC, solvent cement and testing of joints complete as per direction of Engineer in charge. Internal work.

32 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stabijity for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with One step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work.

32 mm nominal outer dia pipe

Providing and fixing G.l. pipes complete with G.l, fittings including trenching’and refilling etc. External work.

80 mm nominal outer dia Pipes

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

P/F Motor pump (1H.P) i/c fitting.

SH: Providing IEI for Academic Building

Wiring for light point / Fan point/ Exhaust Fan point / Call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in surface / recessed PVC conduct with modualr type switch, modualr plate suitable size GI box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc. as reqd.

(i) Group A

(ii) Group B

(iii) Group C

Wiring for light point / power plug with 2 x4mm 2 FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit along with 1no. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc. as reqd.

Wiring power plug with 2 x 6mm2 FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit along with 1 no. of 6mm2 FR PVC insulated copper conductor single core cable for loop earthing etc. as reqd.

Wiring for circuit/sub main wiring along with earth wire with (the following sizes) of FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit etc. as reqd.

(i) 2x1.5mm2 + 1x1.5mm2 earth wire

(ii) 2x4mm2 + 1 x 4mm2 earth wire

(iii) 2x6mm2 + 1x6mm2 earth wire

(iv) 2x10mm2 + 1x10mm2 earth wire

S/F 63amp double pole 240 V isolater in the existing MCB DB complete with connection testing & commissioning as reqd. (Single pole)

S/F single pole 5 amp to 32 amp rating 230 V B series MCB for lightning and other load in the existing MCB DB complete with connection testing & commissioning etc. as reqd.

S/F suitable size GI box with modular plate and cover in front on surface or in recess i/c P/F 3 pin 5/6 amp modular socket out let 5/6 amp modular switch, connection painting etc. as reqd. (for light plugs to use in non-residential building)

S/F suitable size GI box with modular plate and cover in front onsurface or in recess i/c P/F 6 pin 15/16 and 5/6 amp modular socket out let 15/16 amp modular switch connection painting etc. as reqd.

Supplying & Fixing stepped type electronic fan regulator on the existing modular plate switch box i/c connection but excluding modular plate etc. as reqd.

S/F brass battern/angle holder i/c connection etc. as

S/F (following way) single/double pole and neutral, sheet steel MCCB distribution board 240 V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphatized and powder painted including earthing etc. as reqd.

(i) 8 way single door

Earthing with copper earth plate 600mm x 600mm x 6mm thick i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) as reqd.

Extra for using salt and charcoal for GI or copper plate earth lectrode as reqd.

S/L 8 SWG copper wire at 0.50m below ground level for conductor earth eledroide i/c coldering etc. as reqd.

P/F 4mm dia copper wire on surface or in recessed for loop earthing as reqd.

S/F 48" sweep (1200mm) A.C ceiling fan complete with down rod, canopy,3(three) blades but without regulator etc. as reqd. (Make Bajaj/Usha or similar)

10 sq.mm ISI marked FR PVC insulated, single core copper conductor cable

S/F 60/63 amp porcelian fuce unit (Kit kat)

S/F (following rating) four pole 240V isolator in the existing MCB DB complete with connection, testing and commissioning as reqd.

Supply & fixing of Metal boxes with phenolic laminated sheet cover in front

(i) 250mm x 300mm x 100mm deep

S/F Bus bar chamber with 4 strips copper bus bar of length 300mm suitable for 100 amp capacity complete with all accessories i/c connection earthing the body etc. as reqd.

S/F 305mm sweep exhaust fan complete with all accessories i/c connection etc. as reqd.

Erection of steel tubular pole of length not less than 8 mtrs but not exceeding 10 mtrs in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone agtt. 40mm nominal size) foundation i/c excavation & refilling etc. as reqd.

8 meter long steel tubular pole (410 SP-14)

S/F 18 Ceiling fitting surface

S/F change over 100W

S/F 9W LED Bulb

SH: Construction of Approach Road

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth upto 50 m and lift upto 1.5 m, disposed soil to be levelled and neatly dressed. (i) All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering & shuttering.

(a) 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

SH: Land Development

Earth work in rough excavation, banking excatated earth in alyer not exceeding 20cm in depth breaking clods, watering, rolling each layer with 1/2 tonne roller or wooden or steel rammers and rolling every third and topmost layer with power roller of monimum 8 tonne and dressing up embenkment for roads, flood banks, marginal banks guide banks and filling up ground depressing, lift upto 1.5 meters and without lead. a) Loose soft soil.

M/S KIM & SONS CONSTRUCTIONS & EQUIPMENTS (BID ID -9819)