Loading…
Loading…
Tender Value
₹2.0 Cr
EMD Value
₹4.0 L
Closing Date
25 Aug 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
SIGNAL
15 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIIB of Northern Railway Standard Tender Document- 2022, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
(a) The Tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (i) In case of tender for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges- substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificate issued by any Govt. Organization, work experience certificate issue by Public listed company having average annual turnover of Rs. 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated /registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Substantially Completed Work means an ongoing work in which payment equal to or more than 90% of the present contract value (excluding the payment made for adjustment of Price variation (PVC), if any) has been made to the contractor in that ongoing contract and no proceedings of termination of contract on Contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60 days of date of invitation of present tender.
Defination of Similar Work :- Any signalling or telecom work involving cable laying and cable route preparation. Note 1: Tenderer may be required to submit the schedule of those works, Completion/ Performance Certificates of which have been submitted by him/her in support of 30 / 40 / 60 % (as the case may be) criterion of similar nature of work.
32 conditions · 15 needing a document upload
1. Tender fee (if asked) need to be deposited online on www.ireps.gov.in. 2. EMD need to be deposited online on www.ireps.gov.in. 3. For the tenders costing above 50 Lacs: Details of "total contractual payments" in the previous three financial years. 4. For the tender costing above 50 Lacs: Details of technical credentials have successfully completed or substantially completed similar nature work as mentioned in tender condition. Completion certificate issued by competent authority should mandatorily mention Name of work, name of agency, Contract agreement number, date of completion/date of completion of substantially completed work, Completed Cost/substantially completed cost of work, Nature of firm (Partnership/Proprietorship etc.) and details of its constituents, if any, PAN/GSTIN etc. so that evaluation may be done accordingly. 5. If Tenderer is sole proprietor: Notarized copy of Affidavit on Stamp paper of appropriate value declaring that his/her concern is a Proprietary concern. 6. If Tenderer is Partnership firm: Self attested copy of (i) Registered/Notarized partnership deed (ii) Original/Notarized power of attorney. 7. If Tenderer is JV/Limited Company: Copy of Memorandum and Articles of Association of the company. Power of Attorney (duly registered/notarized as per prevailing law) by the company authorizing the person to do/act on behalf of the company. 8. If Tenderer is Company: Copies of MOA (Memorandum of Association) & AOA (Articles of Association) of the company. Power of attorney duly registered/notarized by the company in favour of the individual signing the tender on behalf of the company. Resolution of Board of directors in regards of approving Power of attorney issued. 9. If Tenderer is Society: Attested copy of the certificate of registration. Deed of formation. Power of attorney in favor of the tender signatory.10. Copy of PAN number and TIN number.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please submit the copy of the registration certificate of firm, PAN, GSTIN etc.
Tracing of existing cables, making of cable route plan and provision of cable route marker at stations over Firozpur division.
433-Sig-T-40-26-27~NR
433-Sig-T-40-26-27
Open
Works - General
9 Months
Firozpur, Punjab
₹0
₹4.0 L
25 Aug 2026
3 Aug 2026
11 Aug 2026
1 item across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| Programming and Geo Tagging by taking latitude & Longitude by using GNSS receiver Integrated locator or similar in existing S&T cable route with digital mapping through mobile application. Provision of soft and hard copy of digital route plan, Geo-tagging data along with Railway track to cable distance on digital mapping for the section considering the following: (i) Survey of existing underground cable using latest technology equipment like cable route tracer and having RTK based Geo- tagging facility using RTK catalyst correction service capturing depth and location of underground cables with GNSS coordinates with accuracy & capturing distance of cable from fixed structure/nearest track. (with depth range up to 9 mtrs., GNSS coordinates acquired with up to 5 cms location accuracy and generally within 30 cms range with final accuracy depending upon weather and interference conditions. Preparation of such cable route plan using suitable software tools with surround Image Upload facility at each point . Report will show location, depth of cables and distance from fixed structures , Cable route Name, Cable Type, Cable Size , GPS Error (Preferably 5cm to 30cm of better), Photos etc. Data to be handed over to Railway after survey are: (a) Soft copy/coordinates acquired as per Railway requirement in suitable USB. (b) Hard copy of cable route showing depth, location (coordinates), distance from fixed structures legends Like OHE Poles, LC Gate , Culvert in 1 tracing & 2 copies of final paper print and (c) Cable route data acquired will be additionally maintained on a cloud secure server for upto 3 years from the date of data acquisition as backup, in case Railway require copies of same shall be provided . (ii) S&T cable route locating by Geo-tagging per route KM of trench for S&T cable etc. Data output should be mapped provided on .kml format with integrated depth data of cables mapped. (iii) Equipment utilized should have utility mapping software used on mobile phone (Mobile phone with utility mapped software should take data via Bluetooth from both cable locator and RTK/GNSS receiver with auto correction service simultaneously. (iv) Additional map required with cable distance from nearest track to be included and provided as hard copy map with GPS coordinates and Depth of cable mentioned. Cable joint locations to be indicated in route map. (v) Separate color code to be used for different trenches for S&T cable, if applicable. (vi) In route map Geo tagging may be placed at an interval of 20 mtrs. for approx. straight path, and 1 point adjacent to OHE poles. For track crossing, diversions, culverts this may be less as per site requirement. (vii) Data output to be provided in USB & hard copy prints. The GIS mapping shall be carried out using equipment of Make/Model: Radio detection RD 8200SG, RYCOM Pathfinder PLDL or better. Details of equipment utilized should be as per specifications attached with special conditions of work as annexure-I or better. Training on Geo-tagging of cable route to be included. After completing the GIS mapping work, the contractor shall hand over 4 GIS Mapping Kits to the Railways-1 kit for every 100 RKM of mapping done. (Inspection: Material visually by RITES on OEM's WC & TC and work by Consignee) | — | 359.50 | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
FinalGCC-2022-uptoACS6.pdf
ATTACHMENT
IRGCC2022ACS7.pdf
ATTACHMENT
IRGCC2022ACS8.pdf
ATTACHMENT
IRGCC2022ACS9.pdf
ATTACHMENT
IRGCC2022ACS10.pdf
ATTACHMENT
IRGCC2022ACS11.pdf
ATTACHMENT
StandardTenderDocument2022.pdf
ATTACHMENT
correctionslip1toSTD2022.pdf
ATTACHMENT
JPOforProtectionofcablesduringexecuitionofvariousworks.pdf JPO for Protection of ST cables
ATTACHMENT
Specialconditionsofwork.pdf
ATTACHMENT
JPOforProtectionofcablesduringexecuitionofvariousworks.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .