Electromechanical works SITC of Fire hydrant, Fire fighting system for SDH Jouirian

Amount

SITC of underground M.S Pipes (B class) including cutting, screwing, welding etc. and providing all fittings e.g flanges, bends, tees, elbows reducers, clamps, hinges etc. Underground pipes shall be wrapped & coated by providing twin coating of Bitumen wrapping with first coating bitumen coating Wrapping with bitumen Hessian cloth & finishing with Bitumen paint of following sizes: ( Make:- Tata , Jindal, Parkash Surya)

a) 150 mm dia

b) 100 mm dia

c) 80 mm dia

Same as above but for over ground M.S Pipes (B class) including cutting holes & chases in bricks or RCC wall/slab & Making good the same. Painting with one coat of primer and two coats of synthetic enamel of approved shade of following sizes:( Make:- Tata , Jindal, Parkash Surya)

a) 200 mm dia

b) 150 mm dia

c) 100 mm dia

d) 80 mm dia

e) 25 mm dia

SITC of single headed oblique pattern SS hydrant Landing valve with 80mm dia flanged inlet and 63mm dia Instantaneous type female outlet complete with cap and all Accessories.

Supply of non-percolated flexible hose RRL 63mm dia x 15 mtr long complete with instantaneous type 63mm dia male and female SS coupling and Riverted to hose pipe with riverts and copper wire.

Supply & installation of SS 63mm dia short branch pipe with 20mm dia nozzle.

SITC of First aid hose reel wall mounting swinging type complete with drum & brackets, 25 mm dia ball valve & 20 mm dia 30 mtr long high pressure pad hose with shut off nozzle complete as req.

SITC of cast iron double flanged ISI marked Butterfly valve complete with rubber insertion, nuts, bolts, washers etc. of following sizes:

a) 100 mm dia

b) 150 mm dia

c) 80 mm dia

SITC of following accessories:

a) 25mm dia spring loaded air release valve with isolation cork.

b) Pressure Guage

c) Pressure Switch

d) 25 mm dia ball valve for drainage purpose.

SITC of cast iron double flanged ISI marked NRV complete with rubber insertion, nuts, bolts, washers etc. of following sizes:

a) 150 mm dia

b) 80 mm dia

SITC of gunmetal Fire Brigade connection with collecting head 63mm,4 way instantaneous type male couplings with flanged outlet complete with blank caps nuts, bolts & rubber insertions.

SITC of the AUTOMISATION CONTROL PANEL consist of a control cubicle of fabricated sheet steel suitable for floor mount and for 3 phase, 4 wire , 50 hz system incorporating suitable isolating main switches, bus bars, relays, contactors, indication lamps, fuses , instruments automatic isolator and auxillary switch including connectors complete as required for 1 main electric pump, 1 jockey pump as required for the system. (Make:-Agni, Godrej, Honeywell)

Supplying & laying of 4 core 10 sqmm Aluminum cable from motor to electrical panel for automation of the system.

Supplying & lying of 3.5 core 35 sqmm Aluminum cable frommotor to electrical panel for automation of the system.

SITC of horizontally centrifugal end suction pump complete for delivery 1650 ltr/ min against a total head of 55mtrs. With 40 HP three phase motor with speed of 2900 rpm with bronze impeller and coupling, base frame and AVM pads complete as required. The pump shall be provided with mechanical seal.

SITC of horizontally mounted centrifugal pump complete for delivery 180 ltr/ min against a total head of 55mtrs. With 12.5 HP three phase motor with speed of 2900 rpm with bronze impeller and coupling, base frame and AVM pads complete as required. The pump shall be provided with mechanical seal.

Earthwork excavation in trenches including backfilling and leveling the top after laying of MS pipe. ( rmt)

Supply & installation of weather proof hose cabinetsfabricated from 18 swg MS sheet/section with full front glass door and suitable to accommodate 2 nos 15 mtr long hoses and 1 no branch pipes as req.

SITC of Air vessel 250mm dia and 1.5 mtr high withdished top, made of 6mm thick MS pipe complete with 25 NB dia gun metal air release valve, 20mm dia stop valve,25Nb gun metal pressure release valve,49NB drain valve , pressure guage & all accessories as req and painted.

Earthing with G.I earth plate (600 x 600 6) mm thick including accessories & providing masonry enclosure with M.S cover plate & Watering pipe of 40 mm dia etc. as required with charcoal and Salt including excavation and back filling complete as required.

P/f 25 mm x 5 mm G.I strip from earth electrode, on surface or in recess for earth connections as required.

SITC of gunmetal suction coupling for Fire Brigade drawal of water from fire tank of 100 mm dia.

Providing & fixing ABC type fire extinguishers 6 Kg cap. Complete with discharge arrangement, high-pressure hose pipe complete as req.

Measurable quantitiesmay vary at the time of actual execution of the work and shall be allowed as per actual with in the estimated cost.

ZOON ENGINEERING TRADERS

Bee Kay Protection Systems