Loading
Loading…
Loading…
Tender Value
₹1.5 Cr
EMD Value
₹2.2 L
Closing Date
18 Feb 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
TENDER
14 conditions · 3 needing a document upload
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender.
The tenderer must have minimum average annual contractual turnover of 'V/N' or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual Contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Definition of Similar Nature of works : - (i) "Supply, installation, Testing and commissioning of HT Sub-station of same KV or higher KV including associated Electrical work with / without AMC" o r (ii) "Replacement / Maintenance /Modification / Upgradation/ Augmentation of same KV or higher KV Sub-station related work with / without HT panel" or (iii) "Any HT Electrical work of same KV or higher KV work or HT overhead line work or HT cabling work" o r (iv) "Execution of any HT or LT Electrical work"
I/we the tenderer (s) am/are signing this document after carefully reading the contents.
I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.
I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.
I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.
I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.
I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.
I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.
I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.
I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.
I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)
19 conditions · 9 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Copy of PAN card.
Bank Mandate for NEFT/RTGS payment.
Copy of GST registeration
For all tenders having advertised cost of Rs.10 lakh or above, the contractor shall have to submit the option to take payment from Railways through a letter of credit (LC) arrangement. The tenderer shall affirm having read over and agreed to the terms and conditions of the LC option. The option of taking payment through LC arrangement, once exercised by tenderer at the time of bidding, shall be final and no change shall be permitted, thereafter, during execution of contract. (The tenderer have to submit the option to take payment from Railway through a Letter of Credit arrangement).
Documents in support of (a)Sole Proprietorship firm (b) HUF (c) Partnership Firm (d) Joint Venture (JV) (e) Company registered under Companies Act 2013 (f) LLP (Limited Liability Partnership) (g) Registered Society & Registered Trust. (for details refer tender documents)
Undertaking by the tenderer for not being Black Listed/Debarred:- For the tender submitted on (a)Sole Proprietorship firm (b) HUF (c) Partnership Firm (d) Joint Venture (JV) (e) Company registered under Companies Act 2013 (f) LLP (Limited Liability Partnership) (For details refer tender documents).
The validity of tender offer if mentioned elsewhere in the bid document is different from the number of days shown in the "NIT HEADER", then the validity of offer as indicated in the "NIT HEADER" shall prevail and considered binding.
The firm should follow all the guidelines & protocols set by government regarding COVID-19 pandemic. The firm should counsel his staffs regarding COVID-19's safety measures and provide the PPE kits of COVID(i.e. mask, soap, sanitizer) to their staffs
Please read carefully the entire e-tender document, explanatory notes & attached Annexures from the document section before submission of tender offer.
Air Conditioning of IRIMEE, SGH hostel along with augmentation of transformer capacity and supporting infrastructure at Jamalpur
JMP-ELECT-72-RE-2025~ER
JMP-ELECT-72-RE-2025
Open
Works - General
9 Months
Munger, Bihar
₹0
₹2.2 L
18 Feb 2026
24 Jan 2026
4 Feb 2026
88 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,46,16,462.44 | ||
| — | — | — | 28,66,184 | ||
| Design,Fabrication, supply,installation, testing & commissioningof 11KV 800 A HT VCB panel (Detail as per explanatory notes) | — | 1.00 | — | — | |
| — | — | — | 2,38,660 | ||
| Laying of 4CX50/70/120/150/185/240/400 sq.mm XLPE cable Aluminium by digging cable trench 1 mtr deep X 500 mm wide and refilling sand and one layer of brick over and both side of the cable, passing cable through M.S. pipe while crossing road / drain with end socketing including transportation of cable from LT store to proposed site. Make of Pipe: Heavy duty type :- Tata, Jindal, Bansal, Nikolas Metal & Alloy. or similar | — | 1000.00 | — | — | |
| — | — | — | 53,06,200 | ||
| Supply & Laying of 110mm dia HDPE pipe (PE-80, PN-8) by Micro tunneling method under road, footpath, rail track etc. And inserting cable through HDPE. (Cable supplide by Railway) (Detail as per explanatory notes) | — | 4300.00 | — | — | |
| — | — | — | 4,16,577 | ||
| Butt welded joint for micro tunneling with laying of 110mm HDPE pipe (one joint for every 6 meter) | — | 717.00 | — | — | |
| — | — | — | 24,04,010.4 | ||
| Supply, Installation, Testing and commissioning of compact sub station having 500 KVA capacity with all other accessories as per site requirement. (Detail as per explanatory notes) | — | 1.00 | — | — | |
| — | — | — | 24,610.92 | ||
| Supply, Fixing, testing and commissioning of 11KV, 400A, 50 Hz 3 phase vertically mounted gang operated switch complete with down rod, locking arrangement, isolators and other accessories. Also connection to earthing system. | — | 2.00 | — | — | |
| — | — | — | 5,992.24 | ||
| Supply, Fixing, testing and commissioning of Lightening arrester (9KV-5KA). A set consisting of 3 pieces with provision of disconnectors along with other accessories suitable for 11KV HT feeder | — | 2.00 | — | — | |
| — | — | — | 40,000 | ||
| Erection of Rail pole 2 no. H pole structure (Aprox 9m) (Rail pole supplied by railway) | — | 2.00 | — | — | |
| — | — | — | 644 | ||
| Scraping cleaning & painting of Rail/ tubular pole along with cross arm bracket with anti corrosive red oxide and double coat of aluminium paint and finaly black paint upto 1.5 m from ground level | — | 4.00 | — | — | |
| — | — | — | 2,412 | ||
| Supply, fixing and testing of Guy rod assembly of size 5/8 " x 6' long complete with anchor plate and guy rod of suitable length of size 7/10 SWG starnded GI wire straining insulator etc including foundation of anchor plate as per IE standards | — | 4.00 | — | — | |
| — | — | — | 23,820 | ||
| Supply, fixing and testing of Cross Arm bracket made of MS angle of size 65mm x 65 mm x 6 mm of length 6.5 ft long and with 3 nos of 11KV Pin insulator including supply of all necessary clamps, nuts and bolts and painting | — | 12.00 | — | — | |
| — | — | — | 20,940 | ||
| Supply fixing testing of ISI branded MS Channel of size 75 mm x 40 mm x 6 mm of length 3.5 meters long including fabrication and binding for double pole structure and allied accessories as per site requirement. | — | 12.00 | — | — | |
| — | — | — | 16,008 | ||
| Supply fixing testing of ISI branded MS Angle of size 65 mm x 65 mm x 6 mm of length 3.5 meters long fabrication and binding for double pole structure and allied accessories as per site requirement. | — | 12.00 | — | — | |
| — | — | — | 4,428 | ||
| Supply fixing testing and commissioning of 11KV disc insulator complete with hardware material | — | 12.00 | — | — | |
| — | — | — | 51,744 | ||
| Supply, fixing and commissioning of heat shrinkable straight through jointing kit suitable for 3 x 95 sq mm XLPE HT Cable | — | 6.00 | — | — | |
| — | — | — | 45,675 | ||
| Supply, fixing and commissioning of outdoor end termination kit suitable for 3 x 95 sq mm XLPE HT Cable | — | 6.00 | — | — | |
| — | — | — | 2,23,972 | ||
| Concealed wiring of light/fan with 1.5 mm2 PVC insulated single core flexible multistrand FRLS copper wire along with modular switches , board & 1.0 sq mm ECC insulated copper earth wire (Cable make- Anchor, Havells, Mescab, Polycab, Great white or similar and Switch Make- Anchor, Great white, Havells, Cona or similar) | — | 532.00 | — | — | |
| — | — | — | 39,375 | ||
| Supply fixing and commissioning of Earth Pipe 2" dia 10 feet long heavy duty gauge ISI marked GI Pipe (Make-Tata, Jindal, Bansalor similar) along with construction of earth chamber including of 6 SWG GI wire from earth electrode to main switch/panel complete with all masonary work covering by RCC slab with net plastering as per site requirement & writing the earth value in ohms inclusing supply of materials. | — | 10.00 | — | — | |
| — | — | — | 1,04,802 | ||
| Supply, installation, testing and commissioning o f LT cubicle panel (with red, yellowand blue indication lamp) made by MS Original sheet enclosure with 14SWG with inside and outside anti corrosive ISI brand painted with cubicle cable alley box consisiting of following components (i) 3 phase with neutral copper busbar of min 160 A - 1 Set (ii) Thermal magnetic MCCB 160A, 4 Pole (36KA, Ics=100% Icu)- including spare terminal 01 set (incoming) (iii) Thermal magnetic MCCB 32/63A 4 Pole (36KA, Ics=100% Icu)-04 set (outgoing) (iv) MCB 4 Pole 32A-03 set (outgoing) (v) MCB 2 Pole 16A- 02 set outgoing (vi) LT 3 lines LCD display, emfis panel mounted multi function energy meter (voltage, current and frequency, power factor, power and energy) 01 set (vii) earthing terminal 02 set | — | 1.00 | — | — | |
| — | — | — | 3,010.7 | ||
| Supply and erection of LT cable gland with alluminium socket jointing of 4 core (120- 185) sq.mm. | — | 10.00 | — | — | |
| — | — | — | 4,227.3 | ||
| Supply and erection of LT cable gland with alluminium socket jointing of 4 core (240- 400) sq.mm. | — | 10.00 | — | — | |
| — | — | — | 15,430.8 | ||
| Supply and erection of heat shrink straight through LT cable jointing kits of 4 core (120-185) sq.mm. | — | 10.00 | — | — | |
| — | — | — | 21,737.1 | ||
| Supply and erection of heat shrink straight through LT cable jointing kits of 4 core (240-400) sq.mm. | — | 10.00 | — | — | |
| — | — | — | 80,904.08 | ||
| Supply, fixing & commissioning of 4 pole 200A MCCB, breaking capacity 25/35KA with sheet steel enclosure with MS clamp on beam (Make of MCCB -Havells , L&T, ABB, HPL or similar) | — | 4.00 | — | — | |
| — | — | — | 34,986 | ||
| Supply, fixing & commissioning of 4 pole 100A MCCB, breaking capacity 25/35KA with sheet steel enclosure with MS clamp on beam (Make of MCCB -Havells , L&T, ABB, HPL or similar) | — | 4.00 | — | — | |
| — | — | — | 48,072 | ||
| Supply, fixing and commissioning of 4 Pole, 6-way, 200A copper busbar for power supply distribution.(Make Havells , L&T, ABB or similar) | — | 4.00 | — | — | |
| — | — | — | 40,640 | ||
| Supply and fixing of power supply board for computer with modular type switches, sockets and boards consisting of the following: i) 03 nos. 6 Amp switch (ISI marked), ii) 03 nos. 6 Amp shuttered plug socket (ISI marked), iii) 01 no. 16 Amp switch (ISI marked), iv) 01 no. 16 Amp shuttered plug socket (ISI marked), v) 01 no. 16 Amp MCB, vi) 01 no indicator | — | 40.00 | — | — | |
| — | — | — | 66,120 | ||
| Supply & modular wiring for AC Point with Modular AC starter. (Make- Anchor, Cona, Havells, Crabtree) or similar | — | 58.00 | — | — | |
| — | — | — | 45,220 | ||
| Supply,fixing and commissioning of SPN distribution board IP 43- Metal door 06 way (4 nos SP 6-32A MCB, 1 nos RCCB 32/40A) | — | 10.00 | — | — | |
| — | — | — | 3,48,060 | ||
| concealed wiring of main circuit with 2x1Cx6 mm2 PVC Insulated 1100V grade flexible FRLS single core wire, M/strand copper wire throusg suitable size ISI marked PVC conduit pipe/casing/concealed way along with ECC of 1 no. 2.5 sq mm PVC insulated single core M/strand FRLS copper wire as per General specification of IE rule (PVC wire make Havells/Polycab/RR Kabel/KEI/Gloster) or similar | — | 2000.00 | — | — | |
| — | — | — | 6,65,800 | ||
| concealed wiring of sub main circuit with 2x1Cx4 mm2 PVC insulated 1100V grade FRLS single core, M/strand copper wire through suitable size (ISI Marked) PVC conduit pipe/casing/concealed way along with ECC of 01 no. 2.5 sq mm PVC insulated single core, M/strand FRLS copper wire as per General Specification of IE Rule. (PVC wire make Havells/Polycab/RR Kabel/KEI/Gloster or similar) | — | 4000.00 | — | — | |
| — | — | — | 14,058 | ||
| Supply & Fixing of 9W LED Bulb with holder | — | 60.00 | — | — | |
| — | — | — | 34,650 | ||
| Supply, fixing and commissioning of exhaust fan 300mm sweep, 230 V with all accessories on suitable M.S. clamp nut & bolt. | — | 15.00 | — | — | |
| — | — | — | 47,500 | ||
| Supply, Fixing and Commissioning Philips/Havells/Surya/Crompton or similar) | — | 50.00 | — | — | |
| — | — | — | Light | ||
| — | — | — | 37,216.8 | ||
| Supply of integrated LED TUBE LIGHT 4ft.luminaires 1 X 20W (approx.) (Extruded AluminiumLED Batten) (IP:20) (indoor type) complete withtube and all accessories as per GeneralSpecification. (Make:Bajaj/Philips/Havells/Crompton/Panasonic or similar | — | 80.00 | — | — | |
| — | — | — | 2,79,174 | ||
| Supply, fixing of BLDC energy efficient ceiling fan 1200 mm sweep with remote and all other accessories (Make: Atomberg/Bajaj/Usha/Havells or similar) | — | 85.00 | — | — | |
| — | — | — | 63,795 | ||
| Supply, fixing and testing and commissioning of LED Street Light Luminaire 45W approx,system efficacy => 120lm/W with pressure die castaluminium housing complete with all accessories asper General Specification. (LED luminaires shouldconform tomin IP:65) (Make:Bajaj/Philips/Havells/Crompton/Panasonic or similar) | — | 15.00 | — | — | |
| — | — | — | 2,54,255 | ||
| "High Mast Lighting Octagonal Tower With Integrated All In One Solar Led Street Light, Onsite warranty 3 year Height 10 m (Detail as per explanatory notes)" | — | 1.00 | — | — | |
| — | — | — | 82,160 | ||
| Supply, installation, testing and commissioning of Solar water heater system with flat plate collector (FPC) capacity 220 LPD with all accessories, no. of collectors 02 and ss outer body. | — | 1.00 | — | — | |
| — | — | — | 4,63,155 | ||
| Supply & Fixing of LED lamp white warm light bed/table/wall | — | 231.00 | — | — | |
| — | — | — | 48,830.5 | ||
| Supply, Fixing, connection & commissioning of AC Wall Bracket Fan,3 blades, 400mmsweep, approx 55W, 230V, 50Hz complete with allaccessories. (Make - Havells/Usha/Anchor/Orient/Bajaj/Crompton or similar) | — | 25.00 | — | — | |
| — | — | — | 38,500 | ||
| Supply, installation, testing and commissioning of LED name board (Detail as per explanatory notes) | — | 20.00 | — | — | |
| — | — | — | 42,905.6 | ||
| Supply, fixing and commissioning of 16/6A Plug socket with. 4 sq.mm., PVC insulated FRLS single core, M/Strand copperwire through suitable size (ISI marked) PVC conduitpipe/casing/concealed way along with ECC of 1no.2.5 sq.mm. PVC insulated Single core, M/StrandFRLS copper wire as per General specification of IERule. (PVC Wire Make: Havells/Gloster/ Polycab/ RRKabel/KEI) (Switch & Plug Socket Make: Roma/Panasonic/Anchor/GM Modular/Legrand/Havells or similar) | — | 80.00 | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .