REPAIRS TO FLOORING, SANITARY FITTINGS, SUNKEN FLOOR AND OTHER MISC B AND R WORKS IN TECH AREA AT AF STATION PUNE.

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for cement concrete type B0 1:2:4 (12.5 mm graded agg) 25mm thick as in sub floors complete all as specified and directed.

M&L for coloured Non skid ceramic tiles of size 400x400mmx7mm thick in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for coloured Non skid ceramic tiles of size 300x300mmx7mm thick in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L Glazed Ceramic Coloured Tiles, 450 x 300 x 7mm in size, set on Vertical Surfaces such as Skirting, Dado, etc,over and including 10mm thick screed bed in cement mortar 1:3 Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles, complete all as specified and as directed.

M&L for vitrified ceramic tiles Dark shade 10mm thick (square/rectangular ) polished ,area of each tiles exceeding 0.36 sqm but not exceeding 0.42sqm in floors ,in floors and dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 100mm thick PCC type B-2 (1:2:4) using 40mm graded agg as in flooring finished even and smooth w/o using extra cement complete all as specified and directed.

M & L for 75mm thick PCC 1:3:6 type C-2 using 40 mm graded agg finished even and smooth w/o using extra cement complete all as specified and directed.

M & L for 50 mm thick PCC 1:3:6 type C-2 using 40 mm graded agg finished even and smooth w/o using extra cement complete all as specified and directed.

Sand filling under floor or in foundation including watering and consolidation complete all as specified and directed.

M&L for pre-cast concrete machine pressed rubber moulded glossy finished interlocking paver Block of 60mm thick M-35 grade any colour (as approved) and design Over sand cushioning complete including with using grey cement and pigment any shape and size conforming to IS-15658-2006 complete all as specified and directed.

M&L for Coloured chequered cement concrete exterior glazed tiles of size 30cmx30cmx10mm thick in floor laid and jointed in cement slurry and pointed in grey cement and pigment over 20 mm thick screed bed in CM (1:6) complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floor apron etc laid bedded and pointed in cement mortar complete all as specified and directed.

M& L hand cut kota stone slab flooring 20-25mm thick over cement screed base laid andjointed with grey cement slurry mixed with pigment to match the shade of the slab laid over and including screed bed 15 mm thick in cement mortar (1:4), including rubbing and mirror polishing complete all as specified and directed.

M& L hand cut kota stone slab flooring 20-25mm thick as in vertical surface such as skirting and dado jointed with grey cement slurry mixed with pigment to match the shade of the slab laid over and including backing coat of 15 mm thick in cement mortar (1:4), including rubbing and mirror polishing complete all as specified and directed.

Labour only for full round moulding to 18 to 20mm thick granite slab complete all as specified and directed.

M&L granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in CM (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and directed.

M&L machine cut cudappah stone slab 20-25 mm thick complete all as specified and directed

Dismantling wall & ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

S&F aluminium snap grid powder coated frame work for false ceiling, size of grid 605 x 605mm along with 4mm dia mild steel wire class 3 as in suspenders complete all as specified and directed.

S&F 10mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of complete all as specified and directed.

Taking down and refixing in same opening of chowkats or frames not exc 1.5 sqm each complete all as specified and directed.

Taking down and refixing in same opening of chowkats or frames exc 1.5 sqm n exc 4 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed.

S&F 30 mm thick flush shutters, solid core with block board core and plywood face panels complete all as specified and directed.

M & L for factory made solid PVC moulded door shutter , 28 to 30mm thick (stiles) wuth 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the foront face & 2mm plain colour PVC sheet on back face supplying and fixing in frame at site as per specification & drawing complete all as specified and directed.

S & F solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fixed to wall complete all as specified and directed.

Hacking out old broken glass (any thickness ,size ,quality or description ) from wooden frames or stone ,concrete or brick surrounds ,glazed with putty or fixed with beads complete all as specified and directed.

S & F sheet glass 3 mm thick, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and directed.

S&F Aluminium handles, cast type, anodised 125mm long complete all as specified and directed.

S&F aluminium, anodised barrel tower bolts of extruded section and fixed of size 200 mm long complete all as specified and directed.

S&F aluminium alloy , anodised sliding door bolt with hasp, Staple ( bolt type) and fixing clips of sheet , cast or extruded section and fixing bolts and sliding bolts of extruded section or cast - aluminiumalloy and fixed length of bolt 300mm complete all as specified and directed.

S&F 100mm butt hinges ,extruded aluminium alloy with galvanised mild steel hinge pin ,anodised and fixed ,type B-21 complete all as specified and directed.

M&L for 2 coats of synthetic enamel paint on wood and wood base surface of any description not otherwise described, over 10 cm width or girth over a coat of pink primer incl preparation of surfaces complete all as specified and directed.

Aluminum anodized door shutter with frame of size 62.5x37mmx1.5mm thick with one or more rebate consisting of 5mm thick tinted glass pane, aluminum shutter having top, middle and bottom rail of size 112mmx37mm including jointing cleats, glazing clips, rubber packing, anodized snap beading, , aluminum anodized fittings such as 200mm long tower bolt (2 Nos), 150mm hinges (3 Nos), suitable handles (2 Nos) mortice lock with 02 keys for each door complete all as directed including taking down of old wooden frame with shutter complete all as specified and directed.

Aluminum anodized door shutter without frame aluminum shutter having top, middle and bottom rail of size 112mmx37mm including jointing cleats, glazing clips, rubber packing, anodized snap beading, one or more rebate consisting of 5mm thick tinted glass pane, aluminum anodized fittings such as 200mm long tower bolt (2 Nos), 150mm hinges (3 Nos), suitable handles (2 Nos) mortice lock with 02 keys for each door complete all as directed including taking down of old wooden frame with shutter complete all as specified and directed.

S&F aluminium powder coated three track sliding window with two shutters of 4mm thick tinted glass of modigaurd and one shutter of stainless steel wire mesh including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and directed. :- Three track bottom – 20957, Three track top/vertical – 20958, Handle – 20606,Interlocking – 20605, Top and bottom – 20604.

Dismantling Asbestos cement (corrugated ted, semi corrugated, etc.) sheets in roof coverings or in any position complete all as specified and directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running fixed with angle cleats or other connecting plates of grade Fe 410 W Quality A complete all as specified and directed.

M & L applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces over 10 cm width or girth including preparation of new steel surfaces complete all as specified and directed.

S&F pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/ridge/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Taking down of exist roof treatment including cement plaster complete all as specified and directed.

M & L cement concrete type B0 1:2:4 (12.5 mm graded agg) 25mm avg thick as in roof complete all as specified and directed.

M & L rendering 10mm thick in CM 1:3, using WPC @ 0.20 ltr per bags on roof surface complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thikc reinforced with polyster non woven fabric (wt not less than 150gms/sqm) laid on primed surface by torch application with 10 cm overlaps and Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq. m finally coating the surface with bituminous aluminum paint @ 100gm/Sqm complete all as specified and directed.

Demolition of brick work /stone masonry/pcc block masonry built in cement mortar of any description complete all as specified and directed.

M&L for pre-cast cement concrete block masonry Type C-I 1:3:6 (20 mm graded aggregate) with solid block ,exc 10cm in width and set in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster on brick/stone/concrete surface including wall tiling and hacking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick in CM (1:6) on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Preparing old treated plastered surfaces by washing, rubbing down surfaces and applying two coat of cement base paint complete all as specified and directed.

Disconnecting existing tanks, setting aside including necessary connections (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (including Cleaning repairing etc).Capacity in litres Exc 250 & n exc 500 complete all as specified and directed.

Dismantling water tank exc 250 and n.exc 500ltr capacity and removing from site complete all as specified and directed.

S&F rotational moulded polyethylene cylindrical vertical with closed top water storage tank double layered 500 Ltr capacity, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection complete all as specified and directed.

S & F in repairs 20 mmBrass valves ,high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Taking up or down steel tubing 15mm dia and connections including cleaning for refixing complete all as specified and directed.

Taking up or down steel tubing 20 mm dia and connections including cleaning for refixing complete all as specified and directed.

S & F 15mm dia medium grade GI tubing with all fitting and fixed to wall, ceiling or laid in floors etc complete all as specified and directed.

Refixing only 15mm dia medium grade GI tubing with all fitting and fixed to wall, ceiling or laid in floors etc complete all as specified and directed.

Refixing old steel tubing and connection 20 mm bore in new or old position in wall, ceiling and floor etc complete all as specified and directed.

S & F 20mm dia medium grade GI tubing with all fitting and fixed to wall, ceiling or laid in floors etc complete all as specified and directed.

S & F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed.

Taking down PVC (SWR) pipes 110mm dia complete all as specified and directed.

S & F 110mm bore PVC SWR pipe single socketed in any length fixed to wall complete all as specified and directed.

S & F 110mm bore PVC (SWR) bends with access door complete all as specified and directed.

S & F 110mm bore PVC (SWR) bends complete all as specified and directed.

M&L for cleaning the over head PVC/RCC water tanks by emptying the water by means of petrol/ electric driven self prime pumps and applying high pressure water jet of pressure not less than 120 PSI on wall and floors of water tanks for removing clogged mud/scales etc and cleaning the same again with self priming pumpd of follwing capacity Note: (i) Contractor has to ensure there is no damage / leakage in tank after cleaning . (ii) Any air lock /blockage of water flow after cleaning will be made good immediately.

upto 500 ltr capacity

upto 500 to 1000 ltr capacity

upto 1000 to 2000 ltr capacity

Disconnecting existing tanks, setting aside including necessary connections (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing etc. measured separately).Capacity in litres Exc 500 & n exc 1000 complete all as specified and directed.

Cutting down the plant/trees of girth n exc 15cm, from roof/top sides of external walls of bldgs, in chajjas, wall junctions, junctions of GI/CI/AC/PVC pipes and taking out roots entered in wall/slabs, applying emulsion of non toxic chemicals including making good the surface using PCC 1:2:4 type B1 or cement mortar (1:2) or brick work in CM(1:4) plastered with CM(1:4) to match with existing surface and repairing the pipes and joints which was affected by cutting down/taking out process all as specified and as directed for plants / trees located upto a ht of 7.00 mtrs from GL.etc. complete all as specified and directed.

S & F Grating doom 100mm dia of PTMT including bedding and pointing in cement mortar 1:3 complete all as specified and directed.

Galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanized wire staples complete all as specified and directed.

300 mm, MS ordinary rat tail rod pattern springs and including roller and roller plate complete fixed complete all as specified and directed.

S & F PVC valveless, syphonic action type flushing cistern, low level, white,with inlet, ball valve, float and handle 10 ltrs capacity incl brackets in repairs complete all as specified and directed.

S & F vitreous china wash basin white flat back size550x400mm excl chain and plug and porcelain stopper but incl CI bracket. PTMT waste coupling and PVC waste pipe 75 cm long and 15mm dia PVC connection etc complete in repair complete all as specified and directed.

Bib tap cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia fixed as in repairs complete all as specified and directed.

Pillars taps fancy type cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia fixed as in repairs complete all as specified and directed.

Stop valve fancy type cast copper alloy chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia fixed as in repairs complete all as specified and directed.

S&F aluminium powder coated fancy type curtain rod 25 mm bore complete all as specified and directed.

S&F aluminium powder coated fancy type decorative brackets suitable for 25 mm dia curtain rod (minimum projection from wall 75 mm ) fixed to wall including drilling, rawl plug, screws etc complete all as specified and directed.

S&F Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed (Al die cast body) and fixed in repairs complete all as specified and directed.

S&F in repair 10mm thick corner glass with railling with D bracket complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware /PVC/ AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

S&F 110/150mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F in repair cast iron Nahani trap with grating of diameter of outlet 100mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

M&L for cutting chases, pinning in making good to face for concealed water tubing complete all as specified and directed.

S&F in repair 5mm thick float glass looking mirror of size 600x450mm with aluminium powder coated frame complete all as specified and directed.

S&F in repair vitreous china coloured wash down water closet (pedestal pattern) cascade type ‘P’ trap, in built seat cover and flushing cistern, low level, valveless, symphonic action type complete with inlet ball valve, float and handle as per catalogue No. 20028 Constellation, 21038 cistern (complete set) of Hindware or equivalent complete all as specified and directed.

S&F vitreous chinaware EWC including connection to drain or outgoing pipe and to PVC flushing pipe, antisyphonage pipe, PVC low level flushing cistern 10 ltr capacity with brackets of approval Make and all necessary fittings etc complete all as directed and specified incl PVC seat cover fixed in repair complete all as specified and directed.

S&F in repair vitreous china, squatting pan of 'Orissa' pattern, long pan, size 580 mm x 440 mm, white, with 'P' of 'S' Trap, front or back inlet and foot rests any pattern, including concrete bedding and PVC low level flushing cistern 10 Ltr capacity including 32mm PVC flush pipe, all internal fitting, inlet, outlet pipe connections etc. complete all as specified and as directed.

Dismantling of structural steel work complete all as specified and directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming Fe 410 -W (Gde- E- 250) quality- AFe complete all as specified and directed.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L 12mm thick toughened Glass etching fixed with necessary Ozone Patch touch fittings including openable door chamfered edge polishing each door (Total 4 Nos) high quality steel handles 02 Nos , including cleats, glazing clips, screws etc floor door spring each leaf and Hydraulically regulated, designation No-3 universal type suitable for door shutter of 851 to 1000mm in width and weight between 61 to 80 Kg complete with required assesories including existing door complete all as specified and directed.

S&F in reapir 15 mm Bib tap standard of PTMT (MAKE : PRAYAG) any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms) complete all as specified and directed.

S&F Floor door stopper of brass alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.

S&F in repair brass Mortice lock, vertical type, size 100 mm 4 Levers complete all as specified and directed.

S&F PVC Waste pipe as in WHB Size 50 to 75mm complete all as specified and directed.

S&F in repair 500 Ltr PVC Water Tank Cover complete all as specified and directed.

S&F in repair for 15 mm dia CP pillar tap CP cast copper alloy complete all as specified and directed.

S&F in repair 15 mm dia CP brass PVC connection 45 cm long including check nuts etc complete all as specified and directed

M&L for 15 mm bore bib tap chromium plated cast copper alloy long body with wall flange complete all as specified and directed

M&L for providing and fixing toilet fittings complete all as specified and directed.

Pillar cock 15mm dia

Angular stop cock

Two way bib cock with wall flange 15mm dia

Toilet paper holder

Soap dish

Towel ring

M&L Anti Termite Treatment under existing floor surface of any description using emulsion by injection methord (300 mm centre to centre hole destance) by means of mechanical injucter at the rate of one liter per hole of emulsion including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 Cement: 2 Coarse sand) to match the existing holes complete all as specified and directed.

M&L Anti Termite Treatment of Voids in any type of masonry using emulsion by injection methord (300 mm centre to centre hole destance with a 45 degree slent) by means of mechanical injucter at the rate of 2.25 liters of emulsion per linear metre including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 Cement: 2 Coarse sand) to match the existing holes complete all as specified and directed.

M&L Anti Termite Treatment along the external wall below concrete or masonry apron using emulsion by injection methord (300 mm centre to centre hole destance) by means of mechanical injucter at the rate of 2.25 liters of emulsion per linear metre including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 Cement: 2 Coarse sand) to match the existing holes complete all as specified and directed.

R k construction

santulan & Company

R K ENTERPRISES

Samruddhi Construction