REPAIRS TO FOOT PATH KERB STONE HARDSTANDING CHAINLINK FENCING AND GATES AND CONNECTED ITEMS UNDER AGE BR I AT GE DSSC WELLINGTON

Amount

Demolition of brick work / pre cast concrete article / stone masonry built in cement mortar all as specified and as directed.

M & L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortor 1:6 including bond stone as specified and as directed.

Refixing for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortor 1:6 except stone as specified and as directed.

Extra over stone walling granite or trap for hammer dressing to face stones and dressing to the maximum depression on face from straight edge held against the dressed surface n.exc 40mm of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses as specified and as directed.

M&L Keyed pointing to random rubble or polygonal uncoursed or brought to course in cement mortar 1:4 as specified and as directed

S&F PVC (SWR) pipes single socketed 110 mm bore in any length with rubber ring joints fixed to walls.

S&F Hand packing broken stone aggregate (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level.

M&L for plain cement concrete 1:2:4, type B1, using 20mm graded stone aggregate as in coping including necessary form work all as specified and as directed.

M&L Preparing new surfaces of walls and applying cement wash with Portland cement slurry two coats to a smooth bodied opaque finish all as specified and as directed.

M&L for Precast cement concrete solid building blocks Type C1 (1:3:6) using 20 mm graded aggregate, exc 10 cm width set in CM 1:6 all as specified and as directed

Material and labour for plain cement concrete 1:4:8type D2, using 40mm graded stone aggregate as in foundation, filling and mass concrete all as specified and as directed.

M&L Extra for forming fair finished drain or channel of 30cm inner girth in cement concrete using extra cement including forms moulds etc all as specified and as directed.

Material and labour for 15 mm thick rendering in cement mortar 1 : 4 on brick / concrete surfaces, finished fair and even without using extra cement all as specified and as directed.

M&L for chequered cement concrete tiles 30 cmx 30 cmx 25 mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments of required colour laid over and including 20mm thick screed bed in cement mortar (1:4) all as specified and as directed.

Material and labour for 75 mm thick PCC 1:4:8 type D2, using 40mm graded stone aggregate in sub-base floor & paving all as specified and as directed.

M&L hardcore of gauge n.exc 63 mm deposited, spread & levelled in layers n. exc 15 cm thick, watered & rammed to a true surface with broken stone or boulders complete as specified and as directed.

Demolition of cement concrete (unreinforced ) of any description and in any postion not otherwise spcifically provided etc. exc 15cm thickness (below or above ground level) and removing debris from site complete all as spcified and as directed.

M&L for cement concrete type C-2, 1:3:6 (40mm graded aggregate) plinth protection /pavings finished even and smooth without using extra cement, 75mm thick all as specified and as directed.

Demolition of cement concrete in ground floors and paving n exc 15cm thickness (Below or above ground level) complete all as specified and as directed.

Providing and laying or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required ling, level and curvature, jointed with CM 1:3 incl making joints with or without grooves incl making drainage Opening all as specified and as directed.

M&L two coats of synthetic enamel paint over a coat of priming paints plaster new concrete surface all as specified and as directed.

M&L one coats of synthetic enamel paint over for old concrete surface including preparation of surfaces all as specified and as directed.

Dismantiling posts (or) struts (wood), RCC (or) steel any section , including taking out embedded portion and making good distrubed ground concrete brick work masnory etc. all as specified and as directed.

Dismantling of Wrought iron (or) mild steel work ,of any descriptionn not otherwise prasided for, all as specified and as directed.

Excavating in post holes each n.exc 0.50 cum getting out hard dence soil including returning filling in and ramming earth or broken rubble mixed with earth around ,in layers n.exc 25 cm ,watering and removing surplus soil to a distance n.exc 50 mtr and making good surface all as specified and as directed.

Material and labour for plain cement concrete 1:2:4 type B2, using 40mm graded stone aggregate as in foundation, filling and mass concrete all as specified and as directed.

S/F Joist, channel, angle or tee sections, post fixed independently, without connecting plates, etc(cut to ordinary lengths i.e within 20mm of the length indicated quality conforming to Fe 410-W (gde-E-250)quality-A all as specified and as directed.

S&F for MS flat iron fillets in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 all as specified and as directed.

Dismantling fencing wire mesh any type all as specified and as directed.

Supply only Chain link MS galvanised fencing, any size (or) type of 3mm to 4mm dia wire all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type toany type of standards, rails, straning bolts, etc. including provision of binding wire all as specified and as directed.

Refixing of old chain link fencing including line wires, any mesh, size and type toany type of standards, rails, straning bolts, etc. including provision of binding wire all as specified and as directed.

M &L for Welding in repairs n. exc 2.5cm in length N exc 6mm all as specified and directed.

S & F 5 to 10mm mild steel in flat, round (or) square bars, in available length FE 410 W (GDE- E- 250) quality A all as specified and as directed.

S&F mild stell screw bolts of 11 to 15 mm diameter of shank (machine made ) with hexagonal or squre heads at one end and screwed the other ,each screwed end to to be fitted with washers and one hexagonal or squre nut , exceeding 5 cm and not exceeding 10 cm long all as specified and as directed.

S & F in Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to FE 410-W(Gde -E-250) quality-A all as specified and as directed.

M&L for preparing new steel surfaces and applying two coat of synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description over 10 cm width or girth incluidng necessary preparation of surface all as specified and directed.

M&L for preparing old steel surfaces and applying one coat of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth incluidng necessary preparation of surface all as specified and directed.

S & F in repairs galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing (or) tying at crossing with and provision of galvanised mild steel wire, staples (or) steel pins etc, all as specified and as directed.

Repair to existing steel rolling shutters by complete removal and refixing without ball bearing, spring as specified including top cover, anchoring rod, hasp and staple; erected in position as indicated/, complete: push pull or manual type and reweilding, rops, stoppers, oiling, greasing, easying etc including necessary replacement of profile, if required grid channel complete all as specified and as directed. (Note: Spare parts required shall be measured and paid seprately)

Supply only of ball bearing for rolling shutter with necessary replacement of profile complete all as specified and as directed.

Supply only of spring for rolling shutter with necessary replacement of profile complete all as specified and as directed.

Material and labour for TMT bars, 10 mm dia and over cut to length, bent to shape required including cranking, hooking ends and binding with mild steel wire annealed not less than 0.9 mm dia all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not other wise specifically provided for complete all as specified and as directed.

Material and labour for Precast Reinforced cement concrete 1:2:4 type B1, using 20 mm graded stone aggregate as in cover slabs with plain fair faces inclduding setting in CM 1:4 all as specified and as directed (Note : Reinforcement shall be measured and paid seprately)

GMS Builders (BID ID -3398958)

KRA Engineering and Construction (BID ID -3398376)

ACE PROMOTERS (BID ID -3398644)

AR Mohamed Yakub and Co (BID ID -3398395)

m/s prabakaran (BID ID -3398385)

JK BUILDERS (BID ID -3396539)

shree jayam enterprises (BID ID -3397014)

VVM CONSTRUCTIONS (BID ID -3398539)