REPAIR/MAINTENANCE TO INTERNAL ELECTRIFICATION AND CONNECTED ITEMS OF BANA SINGH VIHAR , JADUNAT VIHAR, ARJUN ENCLAVE AND CARIAPPA ENCLAVE AT HISAR MIL STN UNDER GE HISAR

Attending of complaints pertaining to faulty/Non-functional/working state of all accessories/equipments pertain to internal Electrification /ceiling fan/exhaust fan/DBs through telephone or in person round the clock on detailment by MES Service centre for Offrs/JCOs/ORs Md Accn of Hisar Mil Stn by deploying electrician and helper and locating and rectifying the fault from Elect Meter/DB onwards in respect of Sub Main /Point wiring including fixtures for power and light, socket, fan,exhaust fan, bell point including security light fitted in bldgs etc complete and carrying out repairs to the extent of disconnection and dismantling of faulty wires, submain wires, battens, bulk head lights conduits, boxes, Main switches, MCB, DBs, fan regulators, ceiling fans,exhaust fans and other E/M faults pertaining to particulars equipment including providing wire and insulatiion tape required for the rectification of defect and refixing of existing dismantling serviceable articles. all as directed .Scope of work shall include:- (i) Replacement of bulbs /tubes held by users which will be handed over the repairer if so required. (ii)Taking down ceiling fan/exhaust fan of any make and any sweep at site, cleaning dust and opening up for examination, cleaning all parts and providing fresh lubricant to bearing/bush (oil or grease reqquired) fixing the fan in position after assembling and adjustment for proper running including replacing of cable PVC copper flexible of size 23/0.0076 three core from ceiling rose to fan and other parts etc if required including testing for smooth running complete all as specified and directed. Contd/-....................

(iii) Installation of PVC canopy of Ceiling fan, blades of ceiling/exhaust fan, capacitor of any size for ceiling/exhaust fans, MS down rod for ceiling fan, frame and louvers for exhaust fans, hanging hook with washer,nut,bolts and rubber packing (iv)The rate of job refers to maintaining the station internal electrification during the work excluding holyday /Sunday as directed by Einginner incharge . (v) The rate inclusive of maintaing daily complaint (point ) wise register/complaint slip etc signed by both parties or as directed by Engineer in charge (VI) The cost making good and matching the exist in disturbed surface caused during fixing of distributuion boards / terminal boxes etc shall be deemed to be included in this item . (VII) All the T&P required for excution of works shall be arranged by the contractor . (VIII) Cost taking down and ; removing and refixing of MCB DB,MCBs,LED Lights,switches,sockets,PVC blocks, Cover plates,bulb holder,junction box,fan regulator,capacitor etc item to; be replaced / repair shall be deemed to be included in this item. Note: (i)Penality will be charged @ 100 Rs per day on absent of either mechanic/helper or Both.

Dis-assembling of exhaust fan of size 250mm/ 300mm/450mm AC 230 Volts, 50 Hz 900/1400 RPM for repair, removing existing burnt winding wire, bearing/bushes, flexible wire, shaft, check nuts, frame and rewinding with super enameled copper windings wire of suitable size and weight not less than 450gms and replacement of bushes, bearings, shafts, check nuts, bolts and washers, greasing, varnishing and reassembling back including testing complete. Note :- (i) Cost of bushes/bearings, provided shall be measured and paid in this item and nothing extra shall be paid on this account. (ii) Working space if required,will be provided to the contractor for carrying out necessary rewinding/repair with in AGE E/M store yard premises. (iii) If winded exhaust fan found unserviceable within six month of rewinding,contractor will repair the same without any extra cost. (iv)Cost of Machining work in body of exhaust fan by taking out worn out bush, boring hole to accommodate ball bearings is included in this item and nothing shall be paid extra on this account. (v) Cost of carrying exhaust fan from site to the workshop and refixing of the same after repair is included in this item and all T&P and vehicle cost will be born by the contractor in this regard. (vi) Cost of shaft will be paid under appropriate item of Schedule.

M&L for Cutting of hole in existing wall for opning for exhaust fan and making good to faces where required and pointing in cement mortar 1:3 to ends or edges complet all as specified and directed by Engineer in charge.

Supply only capacitor 2.5 mfd to 3.15 mfd dry type for Ceiling fan make of capacitor : Epcos/ Unistar/Usha/ jyoti/ supreme/ Tibcon/Havells complete all as specified and directed.

Supply only capacitor 4 mfd mfd dry type for exhaust fan make of capacitor : Epcos/ Unistar/Usha/ jyoti/ supreme/ Tibcon/Havells complete all as specified and directed.

M&L for preparation of old painted surfaces of the body, blades, down rod etc of ceiling fans of size 1200/1400mm sweep (any make) complete by rubbing with amery paper and filing in cavities with approved filler and applying one coat of spray painting with synthetic enamel paint (Glossy white/ pale cream) on the body, blades, down rods and writing MES /Fan no with black synthetic enamel paint complete all as specified & directed.

M&L for preparation of old painted surfaces of the body and blades, of exhaust fans of size 250/300mm sweep (any make) complete by rubbing with amery paper and filing in cavities with approved filler and applying one coat of spray painting with synthetic enamel paint (Glossy white/ pale cream) on the body, blades, down rods and writing MES /Exhaust no with black synthetic enamel paint complete all as specified & directed.

Supply only of rubber bush complete with nut bolt, fork hook and spilt pin, washer suitable for existing ceiling fan 1200mm/1400mm sweep.

Supply only plug top 16/ 20 Amps, complete all as specified and as directed.