Providing Improved access to water through Household Connection in existing Water Supply Scheme Wadala Viram Block Majitha Distt. Amritsar. UNDER JJM NABARD XXVIi

Amount

Cost of Repair of Machinery Providing & Installing Testing & Commissioning of One No. Electrically driven Submersible Pumping set of reputed Make capable of delivering 722 LPM against a head of 59 mtr (reputed make) complete in all respects as per standard Specifications.

Repair of Pump Chamber

Providing and fixing of Glass strips 4mm thick in floors 40mm wide

Conglomerate floor 50mm thick cement concrete rate 1:2:4 on 100mm thick cement concrete 1:8:16 and 100mm sand filling (Using Mechnical Mixer for Mixing of Material)

12.5mm thick cement plaster 1:4

Painting two or more coats with synthetic enamel paints in all shade on old wood work or metallic or plastered or concrete surface to give an even shade inculding rubbing down old paint.

White washing 3 coats inside of pump chamber complete in all respects

Finishing wall with exterior decorative cement based paint such as snowcem robbiacem etc. on old work in two coats to give even shade.

Supplying & fixing glass panes including special metal sash putty of approved make.

REPAIR OF OHSR

Providing & Fixing OHSR Top Jali complete in all respects

Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) B-Class Including cost of specials (such as Tees, bends, sockets, elbows etc.) painting with anti corrosive bitumastic paint, testing, cutting threading inside building/railing for staircase (OHSR) (15 mm i/d)

Repair of Expansion joints Complete in all respects (110 mm i/d)

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in – charge) Class PN-1 as per ISI 110 mm i/d Sluice Valves flanged

Conglomerate floor 50mm thick cement concrete rate 1:2:4 on 100mm thick cement concrete 1:8:16 and 100mm sand filling on existing OHSR Plinth Protection ( Including Carriage.)

Repair of Sluice Valve Complete in all respects.(150 mm i/d)

REPAIR OF WATER WORKS

Providing & fixing G.I. Barbed wire 3 ply fencing around the head works site in three rows complete in all respects including cost of winding wire & aluminum painting complete in all respects as per standard Drawing.( water works Size 30+50+30+50- 8.00 )=152*3 = 456 mtr

PROVIDING AND FIXING ANGLE IRON PICKETS WITH ANGLE 40MM X 40MM X 6MM INCLUDING COST OF CONCRETE BLOCK AND PAINTING COMPLETE IN ALL RESPECTS

Providing & fixing D.Hook complete with MS Bolts size 300mm x 18mm as per standard Drawing.

Conglomerate floor 50mm thick cement concrete rate 1:2:4 on 100mm thick cement concrete 1:8:16 and 100mm sand filling on existing footpath (Using Mechnical mixer for mixing of material)

Providing & fixing MS Sign board including painting & printing complete as per standard size of DWSS complete in all respects.(Including Carriage)

Providing & Installing Testing & Commissioning of One No. Electrically driven diaphragm opreated metering system chemical dosing chlorinator suitable for for delivering 0.5 to 6 liters of Bleaching Powder solution/ Sodium Hypo solution per hour under maximum delivery pressure upto 7 Kg/cm2 and suction left not less than 1.5 mtr., as per DWSS standard specifations.

Minor Repair & replacement of pipe associated with repair complete in all respects (90 mm pvc pipe)

Minor Repair & replacement of pipe associated with repair complete in all respects (110 mm pvc pipe)

Providing,Fixing and testing at site automatic electronic type water level indication system with gun metal float sensor and electrical cable suitable for three phase pump submersible/monoblock to be fixed on existing panel for OHSR complete in all respect.

Providing and fixing in position CI Bib Cock(tap)(15 mm i/d)as per IS:210 with stainless steel spindle of approved make and Fixng of Nozzle to contro flow of water(to the approval of Enginer-in-charge Complete in all respect

Providing proposed water connections to household up to wall with providing ,laying, jointing, fixing, testing MDPE pipe line 15 mm i/d = 2.00 mtr(Below GL) and ISI Marked G.I. Pipe 15 mm i/d (As per IS 1239) B-Class approved make = 2.50 mtr (Above GL) including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground and ISI marked 15 mm i/d GM Ferrule as per IS:2692 and 3" i/d clamp with CI Bib Cock 15 mm i/d as per IS:210 with stainless steel spindle of approved make as per CSR 30.65(b) complete in all respects. . (Connection at Existing pipe line)

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in – charge) Class PN-1 as per ISI 80 mm i/d Sluice Valves flanged

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department(Including Carriage). Size 0.6m x 0.6m

Carriage for Sand & Bajri (4.5 & 12)

CONDITIONS :-

Item for which no rate or price has been entered in will not be paid for the Employer when execut6ed and shall be deemed covered by the other rates and prices in the Bill of Quantities.

Unit rates and prices shall be quated by the bidder in indian ruppees.

Where there is a discrepancy between the rate in figures and words, the rates in words will govern.

Where there is a discrepancy between the rate and the line total resulting from muluplying the unit rate by quantity the unit rate quoted shall govern.

Any item of work not included in the above contract schedule of rates and got done at the site of work; the same will be paid according to CSR-2010 subject to the premium or discount tendered by the contractor. In the case of non-schedule items, the decision of the Engineer-in-charge will be final and binding upon the contractor. In case any item which is a part of lump-sum rate is be deducted @CSR rates + Ceiling premium prevailing on the date of tender

The work will be carried out in accordance with PWD Book of specifications - 1963 edition with upto date amendments.

Approximate quantities are given in the contract schedule of rates and these can vary at the time of execution of the work. The payment will be made according to the actual work done by the contractor.

All amendments issued on the common schedule of rates 2010. up to the date of opening of tenders will be applicable on the contract schedule of rates.

Contractor should clearly quote his rates in figures & words. Conditional tender will be rejected.

All items and rates provided in the DNIT are subject to the footnotes give in CSR-2010

The Engineer-in-charge will have full powers to change the layout of the work covered in this contract if considered necessary.

No claim will be entertained form the contractor in case, any mistake in description rates or unit occurs in any item taken in this schedule while preparing this DNIT or on account of typing or comparison or over writing. The same will be rectified at any time as per common schedule of rates 2010 along with upto date amendments.

The arrangements of bricks at site of work would be done by the contractor at his own level from his own source.

For any other non-schedule items, the contractor will submit through Engineer-in-charge, the analysis of rates in triplicate based on purchased vouchers. A margin of 10% shall be allowed for material components and 21.5% on labour components and contractor shall produce photo stat copies of the purchase vouchers in support of his claim. The decision of the Engineer-in-charge/Competent authority in the matter shall be final and binding on the contractor.

All the extra items will be got approved from the competent authority and no premium will be allowed on non schedule item

Pavement for the carriage of material shall be paid as per the rates quoted by the tenderer.

Time period allowed for completion of work in 3 months.

If contractor allowed for completion of work within 7 days from the date of allotment, DWSS reserve the right to impose penalty or withdraw the work and propose action for debarring in future tendering or both; decision of Chief Engineer (North) shall be binding.