SPECIAL REPAIRS TO BLDG NO P-214 AT THIMMAYYA LINE AND CERTAIN REVENUE WORK UNDER AGE B/R (SOUTH) NO I AND AGE E/M (SOUTH) OF GE (SOUTH) SECUNDERABAD

Amount

Excavation in trenches, not exceeding 1.5 m wide or not exceeding 10 sq m on plan and not exceeding 1.5 m in depth for foundation of manhole etc and getting out as in hard/dense soil complete all as specified and directed.

Returning , filling in hard/dense soil including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick , including watering ,ramming complete all as specified and as directed .

Removing excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point,in soil complete all as specified and directed.

M&L for filling under floors with moorum/red bajri laid in floors n exc 15 cm thick, spread, levelled in layers n exc 15 cm thick watered and rammed to a true surface all as specified and directed.

Material and Labour for sand filling under floor including watering and consolidation complete all as specified and as directed.

M&L for hardcore of gauge n exc 63 mm deposited(broken stone or boulders, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed Engineer-in-Charge.

M&L for PCC type D2 1:4:8 using 40 mm graded stone aggregate for filling in foundation/ sunken floors /mass concrete complete all as specified.

Supply only integral water proofing compound

M&L for PCC 1:2:4 type B1 using 20mm graded aggregate for bed block including necessary formwork complete all as specified

Material and labour for PCC (1:3:6) type C-1 using 20 mm graded stone aggregate as in block for fixing of hold fast, window cill and similar items including necessary formwork complete all as specified and as directed .

M&L Providing precast cement concrete jalies 35 mm thick type B-0 (12.5 mm graded stone aggregates) set in cm 1:4 complete all as specified and directed Engineer-in-Charge.

M&L for RCC (nominal mix) 1:2:4, type B-1 (20 mm graded aggregates) as in RCC Beams, contilevers, bressummers, lintels over 1.50 m span complete all as specified and as directed .

M&L for RCC (nominal mix) 1:2:4, type B-1 (20 mm graded aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, deck slabs and in shelves and the like complete all as specified and directed Engineer-in-Charge.

M&L RCC 1:2:4 type B-1 (20 mm graded aggregate) as in Precast cover slab for manholes , septic tank cover etc including necessary form works and set in CM 1:6 complete all as directed by engr-in-charge

M&L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate)as in foundation of manholes etccomplete all as specified and as directed .

M&L for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in surface channel complete all as specified and directed.

Extra for fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred/stopped ends etc complete all as specified and directed .

Cutting holes in brickwall builtin cement mortar depth of embedded portion of holdfast exc half brick but not exc one brick and making good dismantled portion in cement mortar 1:3 complete all as specified.

Cutting Chases , pinning in , making good to facing where required and pointing in CM 1:3 to ends or edges of landings , steps , cills , sunshades , shelves , lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good of cutting in brick wall n.exc 10 cm girth complete all as specified .

Material and labour for brick work with bricks class designation 75, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:4 for manholes etc complete all as specified and as directed .

M&L brick work with sub class 'B' bricks straight or curved on plan to any radius half brick wall in CM 1:4 complete all as specified and directed .

Damp proofing course to horizontal or vertical surface including form work in PCC 1:2:4 type B0 (12.5 mm graded aggregates)25 mm thick complete all as specified and directed by Engineer-in-Charge.

M&L for stone masonry walling of squared rubble, uncoursed, will bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed .

M&L for 2nd class hard wood plain fillets, square, rectangular in section wrought screwed with nails area exceeding 13sqcm but not exceeding 25 sqcm

Use and waste of form work to edges of concrete flat slabs sides of RCC etc in walls horizontal or slopping exc 10 cm but n.exc 20 cm wide rough finished surfaces complete all as specified and as directed .

Use and waste of form work to soffits of suspended slabs such as roof slabs, floors slabs, landings and similar work not exceeding 200 mm thick complete all as specified and directed

Use and waste of form work to sides and soffit of floor or roof beams lintels, shalves etc of rough finished surfaces complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames ) not exceeding 1.5 Sqm each incl steel window, ventilators etc complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutter from the frames ) exceeding 1.5 Sqm each but n.exc. 4 sqm each complete all as specified and as directed.

M&L Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube, supplying and fixing in opening as per manufacturers instructions all as directed

S&F Factory made solid panel laminated PVC door shutter 30mm thick (style) consisting of frame made out M.S tube for top & bottom rails. M.S Srame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled the stiles & rails with suitalble PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifications & drawing.

M&L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought framed rebated and solid, rounded or chamfered, put together with glue pinned at joints

M&L for 35 mm thick flush door shutters solid core construction with black board core with decorative face finish on one sides complete all as specified and as directed.by Engr-in-Charge

M&L for factory made 35mm thick 2nd class hard wood, plain framed, paneled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003(Part-I), kiln seasoned and chemically pressure treated , 35 mm thick complete all as specified and directed by Engineer-in-Charge,

S&F 35mm thick second class hard wood glazed and skelton shutters divided into squares with plain, chamfered or rounded, mitred and rebated sash bars prepared to receive glass, gauge sizes of members of shutters as specified in SSR Pt-I, section 8 , clause 8.24 (A) .

S&F 100 mm size butt hinges extruded aluminium alloy with galvanised with galvanised mild steel hinges pin anodised type B2 complete all as specified and as directed.

S&F MS butt hinges, medium weight cold rolled mild steel and fixed sized 100 mm complete all as specified and as directed.

S&F 150mm size aluminium anodised handles, fabricated type complete all as specified.

S&F 100 mm Extruded brass handles, for cupboards fabricated type complete all as specified and directed.

S&F Aluminium handles cast type of 150 mm size complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified.

S&F 200 mm long aluminium anodised barrel tower bolts of extruded sectioncomplete all as specified and directed.

S&F in repairs double action spring hinges mild steel with spring, stove enamelled black 100 mm long comp,ete all as specified and as directed.

S&F for stainless steel wire cloth 0.36 mm nominal dia of wire and aerage width of aperature 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified.

S&F 300 mm long Brass, sliding door bolt withsand or die-cast brass hasp,staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed .

M&L aluminium alloy anodised sliding door bolt with hasp staple (bolt type) length 300mm fixed complete all as specified

S&F floor rubber door stoper of aluminium alloy body and tongue anodised with hard drawn steeel spring fixed in floor 140 mm length complete all as specified

S&F Hasp & staple 100 mm size aluminium anodised fixed with screws complete all as specified

S&F continuous (piano) hinges 30 mm width of flap, brass, bright finish or electrogalvanised complete all as specified and as directed.

S&F 40mm dia cupboard knobs fixed with nuts screws and washers of brass polished complete all as specified and as directed.

S&F 20mm dia CP Decorative type draphery curtain rods with brackets of approved quality as in repair complete all as specified and as directed

S&F in repairs brass chromium plated tubular towel rail 600 mm long complete all as specified and as directed. Make:- Cat No. AQN-7711 of Jaquar or its equivalent to CERA/ Hindware

S&F 600 mm long Tubular tower rail brass chromium plated 20 mm dia, D type fixed with two plugs (Gutties) of 2 nd class hard wood embeded in cm 1:3 with MS screws complete all as specified and as directed .Make:- Cat No. AQN-7711 of Jaquar or its equivalent to CERA/ Hindware

Supply and fix Brass lock 4 lever grade- I of size 75 mm with duplicate key complete all as specified and as directed

Supply and fix double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box , main body with stainless steel cover , governing pivot made of brass , other parts made of mild steel heavy duty complete all as specified and as directed .

S & F powder coated anodised aluminium frame,three partition track sliding for windows, fixed/top hung frame for ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.

S & F powder coated anodised aluminium sliding window shutter and top hung ventilator shutters without sash bars, aluminium sections weighing 0.55kg/m including necessary joining cleats, glazing clips rubber packing ,locking arrengement complete all as specified and directed.(note: Glass pane and wire mesh shall be measured and paid seperatly in respective items of shedule A)

Supply and fix anodised aluminium door shutter , aluminium section weighing 0.55 Kg/m including necessary joining cleats , glazing clips , rubber neoprane packing , handles 02 nos in each door , hinges , anodised aluminium snap beading screws etc complete all as specified and as directed

Supply and fix rolled mild steel Fe-290 (grade E-165 ) framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete all as specified and as directed.

S&F mild steel flat iron as in hold fast complete all as specified and as directed.

Supply and fix Mild steel work for balusters , handrails etc including cleats , brackets confirming to Fe -290 ( Gde E-165 ) and IS:1161-1998 grade St.-240 complete all as specified and as directed .

M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed .

Mild steel bars 8 mm dia TMT bars and over cut to length bent to shape required including cranking, bending spirally including mild steel wire not less than 0.9 mm dia or securing with clips complete all as specified and directed .

M&L for mild steel TMT bars 5 to 8 mm dia as in stirrups , spacers etc and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed .

M&L for providing water proofing felt having glass fibre non woven reinforcement and weighing 3 to 4 kgs /Sqm in 100 mm overlaps both longitudinally and transversely by torch bonding over coat of hot blown bitumen 85/25 at the rate of 1.2 kgs per sqm as in sunken floor ( bottom and vertical surfaces ) complete all as specified and directed.

M &L for priming plastered roof surfaces with bituminous primer @ 0.3 Kg/Sqm as per IS 3384 and providing water proofing treatment by applying mineral finish 3.50 kgs/sqm atactic propylene (advanced APP touch on membrane mineral finish) having polyster film reinforcement stabilised with fibre glass and finished on top with grey mineral slates torch on system of thickness 3.00 mm by torch bonding complete all as specified and as directed.

M&L for prelaminated particle board of 18/19 mm thick interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with timber frame work of cupboards, book case etc complete all as specified and as directed.

S&F 12 mm thick plywood BWR type fixed with screws with timber framework complete all as specified and as directed.

Material and Labour Aluminium anodised snap grid frame work ( size of grid 605X 605 mm ) fixed with hangers 6 mm dia GI ( upto 1200 length ) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40 X 3 mm size size 60 mm long complete all as specified and as directed

Supply and fix 12 mm thick Gypsum board in ceiling fixed with Aluminium span grid of size 606 X 605 mm complete all as specified .

Material and labour for 12 mm thick prelaminated particle board , exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with Aluminium framework complete all as specified and as directed .

M&L for 25 mm thick Plain cement concrete (1:2:4) type B1 using 20 mm graded stone aggregates as in floor complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4 type B0 using 12.50 mm graded aggregate as in level course on floor etc complete all as specified and as directed

M&L for 75 mm thick plain cement concrete 1:4:8 type D-2 (40 mm graded aggregate) as in floor complete all as specified and as directed.

M&L 75 mm thick for PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) as in plinth protection of average thick. Finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

M&L 75 mm thick PCC 1:5:10 (using 40 mm graded stone aggregate) as in sub base complete all as specified and as directed by Engenner-in-Charge.

M&L for 40 mm thick plain cement concrete (1:2:4) type B1 using 20 mm graded stone aggregates as in padding (level course) on roof finishing cement concrete surfaces even & smooth without using extra cement complete all as specified and as directed.

M&L for 10mm thick vetrified light shade polished ceramic tiles,area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed by Engr-in-Charge.

Material and labour for Double Charged Vitrified ceramic coloured tiles of size 600 X 600 mm and 9 to 10 mm thick polished as in floors etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed.

Material and labour for Double Charged Vitrified ceramic coloured tiles of size 600 X 600 mm X 10 mm thick polished in skirting , set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick rendering in CM(1:4) complete all as specified and as directed.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as directed by Engr-in-Charge.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as directed by Engr-in-Charge.

M&L for Non skid coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed Engineer-in-Charge.

M&L for 10mm thick vetrified light shade polished ceramic tiles, area of each tile not exceeding 0.36 sqm, in skirtings/ dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick cement plaster backing coat in CM 1:4 complete all as specified and as directed by Engr-in-Charge.

M&L for glazed ceramic coloured tiles 300x200x7mm thick on vertical surfaces such as dados set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick backing coat in CM 1:4 complete all as directed by Engr-in-Charge.

M&L for Glazed ceramic coloured tiles of size 300x200x7 mm thick, on vertical surfaces, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and as directed by Engineerin-Charge

M&L for Machine cut kota stone slab flooring 18-20mm thick over cement 20mm thick screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for machine cut kota stone slab 18-20 mm thick in riser of steps, skirting,dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl 10mm thick rendering in CM (1:4) backing of wall tiles such as dado/skirting in vertical surface complete all as specified and as directed.

M&L for granite slab flooring 20 to 25 mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone indluding cutting and polishing types over 20 mm thick screed bed in CM 1:6 including making hole in platform for gas pipe

Rounding to edges of stone slabs one edge such as in slopes cooking platform and other similer shine

Roughening surfaces of old concrete floor by picking sweeping cleaning & washing down with water to remove dust etc incl removal of old treatment of any description and applying one coat of neat cement slurry @ 3.00 Kg/Sqm complete all as directed by Engr-in-Charge.

Taking down plastering in cement mortar on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc. complete all as specified.

Material and labour for PCC coloured chequared cement concrete tile of size 20 cm X 20 cm X 25 mm thick as in floor , set , jointed and pointed in neat cement slurry with grey cement and pigment , laid over 20 mm thick screed bed with CM 1:6 complete all as specified and as directed .

Rendering 10 mm thick in CM (1:3) using water proofing compound as per manufacturer instruction as in roof and chajjas complete without using extra cement all as directed by Engr-in-Charge. Note : Water proofing compound will be measured and paid separately.

M&L rendering 10 mm thick on fair faces of brick work or concrete surface in CM 1:4 on vertical surfaces/backing coat complete all as specified and as directed.

Rendering 15 mm thick in CM (1:4) using water proofing compound as per manufacturer instruction as in sunken floor complete all as directed by Engr-in-Charge. Note : Water proofing compound will be measured and paid separately.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smoth without using extra cement complete all as specified.

M&L for rendering 15mm thick on fair faces of brick works in cm 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 5 mm thick in CM 1:3 on ceiling, chajja, roof projection etc finished fair and even without using extra cement complete all as specified and as directed Engineer-in-Charge.

Material and labour for rendering 5mm thick in cement mortar (1:4) with WPC over a layer of 10 mm thick in CM 1:6 on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed. Note : Water proofing compound will be measured and paid separately.

M&L for 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes under floor complete all as specified and as directed.

M&L for Preparation of new plastered or un- plastered surfaces and applying three coats of white wash on walls complete all as specified and directed.

M&L for complete removal of existing treatment and applying three coats of white wash on wall surfaces complete all as specified and as directed.

M&L for Preparation of new plastered or un- plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L for complete removal of existing treatment and applying three coats of white wash on ceiling complete all as specified and as directed.

Material and Labour preparation of new gypsum board ceiling surfaces applying two coats of Synthetic enamel paint over a coat of primer exc 10 cm width or girth complete all as specified and as directed .

Material and labour complete removal of existing treatment and preparation of old wall surface and applying two coats of Oil bound distemper over a coat of alkali resistent primer over 3mm thick wall care putty complete all as specified and as directed .

Material and labour preparation of new wall surface and applying two coats of Oil bound distemper over a coat of alkali resistent primer over 3mm thick wall care putty complete all as specified and as directed .

M&L for prepartion of new plastered surfaces on wall applying two coats of oil bound distemper over a coat of primer including 3mm thick in two coats wall care putty complete all as specified and as directed.

M&L for complete removal of existing wall treatment and applying two coats of OBD over a coat of primer including 3 mm thick wall care putty (in two coats) complete all as specified and as directed.

M&L for preparation of new plastered on wall including applying two coats of weather proof exterior emulsion (APEX) paint over a coat of primer complete all as specified and as directed.

M&L for complete removal of existing treatment and applying two coats of weather proof exterior emulsion(APEX) paint over a coat of primer on wall surfaces complete all as specified.

Material and labour applying two coats of cement based paint on newly plastered surface including preperation of surfaces complete all as specified and as directed .

Material and labour preparation of new plastered surface of walls r applying two coats of cement based paint over coat of alkali resistant primer complete all as specified and as directed .

S & F 5.5 mm thick Sheet glass, ordinary quality in squares exceeding 0.5 Sq. M in each pane fixed to aliminium frame work complete all as specified and as directed.

S & F 5.5 mm thick Sheet glass, ordinary quality in squares not exceeding 0.5 Sq. M in each pane fixed to aliminium frame work complete all as specified and as directed.

S & F 4 mm thick Figured glass, pin headed type in squares not exceeding 0.5 Sq. M in each pane.fixed to aliminium frame work complete all as specified and as directed.

M&L preparation of new steel surface of any description over 10 cm width and girth and apply 2 coats of synthetic enamel paint over a coat of red oxed primer complete all as specified and as directed.

Material and Labour preparation new steel surface applying two coats of Synthetic enamel paint over a coat of primer n.exc 10 cm width or girth complete all as specified and as directed .

M&L preparation of new wooden surfaces exceeding 10 CM girth or width and apply two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed

M&L for preparation of old painted wooded surfaces and applying one coat of synthetic enamel paint complete all as specified and as directed.

S&F in repair vitreous china wash down water closet (pedestal pattern) with plastic seat and cover including PVC low level flushing cistern 10 ltrs capacity complete as directed by Engr-in-Charge.Make:- Cat No. CNS-WHT 553SN of Jaquar or its equivalent to CERA/ hindware

S&F Vitreous china squatting pan, Orissa pattern of size 580 x 440mm, white complete with integral foot rests and PVC low level flushing cistern of 10 Ltr capacity and PVC flush pipe and including provn of lime concrete bedding including CI 'P' trap 100 mm complete all as specified and as directed by Engr-in-Charge.

Supply & fixing in repair vitreous china wash basin with padestal , white flat size 550x400mm incl bracket cutting for and pining in ends of brackets or erecting stand including PVC connection pipe 15 mm bore 450 mm long , waste coupling of PTMT , PVC waste pipe complete all as specified and as directed..Make:- a)for WHB Cat No. CNS-WHT 801 of Jaquar or its equivalent to CERA/ Hindwaree b)for pedastal Cat No. CNS-WHT 301 of Jaquar or its equivalent to CERA/ Hindwaree

S&F Vitreous china white wash hand basin (flat back or angle back type) size 550x400 mm white including brackets, pedestal, wast fittings brass chromium plated, CP waste cupling, 32 mm dia, waste pipe, PVC connection 15 mm bore with PTMT nuts of length 450 mm complete all as specified and directed by Engineer-in-Charge.

S&F PVC Connection 15 mm dia and 45 cm long with Two nos of brass checknuts and washers complete all as specified and as directed.

S&F PVC bathroom cabinet with door fitted with looking mirror as per sample approved and all as directed by Engr-in-charge Make:- Cat No. 551 of Prayag or its equivalent to polytuf/shakti

S&F in repair CP Soap dish fixed with chromium plated brass screw.

S&F HDPE pipes or pressure rating 6kgf/sqcm of 40 mm dia fixed/concealed on walls or floors all as directed by Engr-in-Charge.

S & Fixed in repairs GI pipe medium grade 15 mm dia with all fitting laid in floor or fixed in walls complete all as specified and as directed

S&F GI tubing of 15 mm bore medium grade with all fittings completely fixed to walls or laid in floors etc complete all as specified and as directed.

S&Fixed in repairs GI pipe medium grade 20 mm dia with all fitting laid in floor or fixed in walls icomplete all as specified and as directed

S&F GI tubing of 20 mm bore medium grade with all fittings completely fixed to walls or laid in floors etc complete all as specified and as directed.

S&L in repairs CI floor trap with grating incl jointing to waste pipe with dia of outlet 75mm complete all as specified and as directed.

S&F PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls bore of the pipe 75 mm complete all as specified and as directed.

S&F PVC (SWR) bends 110 mm all as specified and as directed.

S&F 110 mm PVC (SWR) Bends any redius with access door complete all as specified and as directed.

S&F 75 mm PVC (SWR) Bends any redius complete all as specified and as directed.

S&F PVC SWR branch pieces single (equal or unequal) (size or socket type or with parallel branches with access door bore of the pipe 110 mm ) complete all as specified and as directed.

S&F 110 mm PVC (SWR) Branch piece, (singal T) equal or unequal with access door complete all as specified and directed.

S&F PVC SWR branch pieces double (equal or unequal) (size or socket type or with parallel branches with access door bore of the pipe 110 mm ) complete all as specified and as directed.

S&F PVC SWR branch pieces single (equal or unequal) (size or socket type or with parallel branches with access door bore of the pipe 75 mm) complete all as specified and as directed.

S&F 75 mm PVC (SWR) Branch piece, (double T) equal or unequal with access door complete all as specified and directed.

S & F 75 mm dia, PVC (SWR) Floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed by Engineer-in-Charge.

S&F 110 mm PVC (SWR) Vent cowl complete all as specified and as directed.

S&F in repairs angle/stop valves cast copper alloy, screwed down high pressure fancy type chromium plated 15 mm dia complete all as specified and as directed.

S&F in repair angle valves cast copper alloy, screwed down high pressure fancy type chromium plated 15 mm dia with long shank and cup (concealed type) all as directed by Engr-in-Charge Make:- Cat No. CQT 23059 of Jaquar or its equivalent to Prayag/ MARC

S&F in repair Fancy type chromium plated 15 mm dia Bib taps cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe complete all as specified and as directed.Make:- Cat No. CON107KN of Jaquar or its equivalent to Prayag/ MARC

S&F for Chromium Plated Bib taps 15 mm bore cast copper alloy with crutch or butterfly handle, screwed for iron pipe fancy type complete all as specified and directed by Engineer-in-Charge.Make:- Cat No. CON107KN of Jaquar or its equivalent to Prayag/ MARC

S&F in repairs Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-90gms/20mm-125gms 15mm dia bore complete all as specified and as directed.

S&F in repair stainless steel sink with draining board made out of 1.00 mm thick sheet for kitchen with plug and washers, waste pipe with cantilever brackets.over all size 914 X 460mm bowl size 405mm X 354mm X203mm complete all as specified and directed.Make:- Cat No. 1239D of Prayag or its equivalent to NIrali/ Parryware

S&F in repair Stainless steel plate rack of size 31"x36"x10" complete all as specified and as directed .Make:- Cat No. P 348 of Prayag or its equivalent to NIrali/ Parryware

Supply and fix in repair CP health faucet with 01 Mtr tube and hook complete all as specified .Make : Cat No:ALD-579 of Jaquar or equivalent .

S&F in repairs pen jet in water closet (peddestal pattern) complete all as specified.

Supply and fix in repair wall mixer with provision of overhead shower with 115 mm long bend pipe on upper side , connecting legs & wall flanges complete all as specified and as directed .Make :Cat No: FLR-5273UPR of Jaquar or equivalent .

S&F in repairs toilet paper holder, vitreous china, box type coloured, fixed with chromium plated brass screw complete all as specified.

Dismantling water tanks of exc 250 but n.exc 500 ltr capacity and removing to store

S&F of rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of capacity 500 Ltrs complete all as specified and as directed.

S&F 1000 ltrs capacity rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engineer-in-Charge .

Dismantling water tanks of exc 500 but n.exc1000 ltr capacity and removing to store

S&F in repairs Gun metal globe or gate valves of 20 mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and as directed.

S&F 20 mm dia Gunmetal globe or gate valves with iron wheel head screwed both ends for iron pipe.

S&F 20 mm Ball brass valves. high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

Supply and fix in repair 150 X150 mm overhead shower complete all as specified . Make :Cat No:OHS-CHR-1605 of Jaquar or equivalent .

Supply and fix in repair shower arm 400 X 25 X25 mm square shape for wall mounted shower complete all as specified .Make : Cat No:SHA -455L400 of Jaquar or equivalent .

Supply and fix in repair sheet glass assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed .

S&F for Chromium Plated Stop valves 15 mm bore (conceled type) cast copper alloy,fancy type,with iong shank and cup complete all as specified and directed by Engineer-in-Charge.Make:- Cat No. CQT 23083K of Jaquar or its equivalent to Prayag/ MARC

S&F for Chromium Plated Angle valves 15 mm bore cast copper alloy, fancy type, with iong shank and cup complete all as specified and directed by Engineer-in-Charge.

S&F for 15 mm dia pillar taps fancy type cast copper alloy, with capstan heads, chromium plated screwed down high pressure, with or without lettered 'Hot' or 'cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed. Make:- Cat No. CON 021KN of Jaquar or its equivalent to Prayag/ MARC

S&F Brass choromium plated shower rose with or without swivel joints 125 mm size including fixing to steel pipe or union complete all as specified and directed.

S&F 150 mm internal dia of salt glazed stone ware drain pipes laid in trenches and jointed complete all as specified and as directed .

M&L for PCC 1:3:6 type C-2 Concrete bed to drain pipes 150mm dia including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed .

Demolition of stone slabs and tiles of any description or any thickness laid bedded and pointed in any mortar in floors approns etc. complete all as directed by Engr-in-Charge.

Demolition of cement concrete in floors and pavings n.exc15 cm thickness (below or above ground level) complete all as specified

Demolition of cement concrete(unreinforced) of any description and in any position not otherwise specifically provided including floor finishes complete all as specified and directed.

Demolition of cement concrete on Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work cement concrete complete all as specified.

Demolition and beaking up drain AC pipes/PVC pipes set in cement mortar of any dia and size complete all as specified.

Dismantling of existing Aluminium partition including glass and boards complete all as specified and as directed

Dismantling of existing wooden work section and remove to store complete all as specified and as directed .

Dismantling of wall and ceiling boards (fibre, pulp ,insulation etc) or insulation boards /slabs/blankets , any thickness , including cover fillets complete all as specified and as directed

Taking down existing unserviceable point wiring of any description/type/ size of light/ fan/tube/power/two way/bell point etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as per existing at site including making good the disturbed surfaces to match with the existing finishes all as specified.

M & L for Point wiring in concealed conduit with 1.5 Sq mm FLRS wire copper conductor single core PVC insulated 1100 V multistranded drawn through conduit and including rigid PVC conduit and conduit accessories of suitable dia medium grade and pressed steel terminal boxes of 2 mm thick MS duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement covered with 3 mm thick laminated hylam sheet including running up of 1.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc for One light point controlled by one, one way switch 5A, SP all as specified and directed.

All as per Sl item No 168 above, but for One ceiling / exhaust fan point controlled by one, one way switch and regulator

All as per Sl item No 168 above, but for One bell point controlled by one, one way switch 5A, SP

All as per Sl item No 168 above, but for One 2/3 pin 5 Amps switch socket outlet point controlled by one switch on the same board

All as per Sl item No 168 above, but for One 3 Pin 5 Amps switch socket on Independt board

All as per Sl item No 168 above, but using 4 Sq mm single core copper conductor cable of multistranded PVC insulated FRLS wire 1100 Volts grade for 5/15 Amps switch socket combination point including running of 4Sq mm copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

S & F Switch modular type single pole one way flush type 5 Amps capacity 230 volts.

S & F Modular Switch 1 way 16 A, 1 Module capacity 230 Volts complete all as specified and as directed.

S & F Modular Socket, 6A- 2/3 combined 2 module of capacity 230 Volts complete all as specified and as directed.

S & F Modular Socket, 6/16A- 2/3 combined 2 module of capacity 230 Volts complete all as specified and as directed.

Supply and fix modular switch socket combination flush type multipurpose 2/3 pin 5 Amps, 230 Volts complete all as specified and as directed.

Supply and fix modular socket outlet flush type multipurpose 2/3 pin 5 amps, 230 volts complete all as specified and as directed.

Supply and fix modular switch socket combination flush type multipurpose 5 in 1, 5/16 Amps, 230 Volts complete all as specified and as directed.

S & F modular Bell ding dong type AC 230 volts.

S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified and as directed.

S&F Vertical type TPN DB 4 Way double door with incoming as MCCB TP 415 volts AC 3 Phase 50Hz with fixed magnetic setting for current rating of 100 amps 16 KA locking arrangement including painting by redoxide one coat and powder coated complete all as specified and as directed.

S and F sheet metal enclosure MCB DB SPN 4 way with 200 Amps rated bus bar 240 Volts double door with flush type locking system complete all as specified and as directed.

S and F sheet metal enclosure MCB DB SPN 8way double door with 200A rated bus bar 240 Volts double door with flush type locking system complete all as specified and as directed.

S & F Sheet metal enclusure MCB DB SPN 12 way double door with 200A rated bus bar 240V double door with flush type locking system complete all as specified

S&F Metal Clad Socket 3 Pin 30 Amps industrial type with plug top and MCB SP 32 Amps all enclosed in sheet metal enclosure.

S &F MCB SP 6 to 32 Amps 240 volts for fixing on MCB DB's complete all as specified and as directed.

S &F MCB SP 40 to 63 Amps 240 volts for fixing on MCB DB's all as specified

S &F MCB SPN 25 to 32 Amps 240 volts for fixing on MCB DB's all as specified

S &F MCB SPN 40/63 Amps 240 volts for fixing on MCB DB's all as specified

Supply and fix wall mounted box type LED batten suitable for 18 w/20w with LED lamp alongwith integrated driver complete all as specified and directed by Engr in charge

S &F wall mounted box type LED batten suitable for 9/10watt with LED lamp alongwith intergrated driver complete all as spcified and directed by Engr in charge

S &F lamp holder insulated body surface bakelite with back plate suitable for angle/batten fittings

supply install tesing and commisssioning of SMC meter boxes suitable for in door/out door with locking arrangement recess in wall/surface mounted, one piece moulded SMC base and SMC door with internal hinges, viewing glass arrangement for wire seal of suitable size for LT three phase KWH meter complete all as directed

M & L for Submain wiring with two single core 10Sq mm PVC insulated wire copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and conduit accessories of 25 mm dia medium grade including running up of 10 Sq mm copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified. Note:-Two runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured and paid as one unit length.

M & L for Submain wiring with two single core 6 Sq mm PVC insulated wire copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and conduit accessories of 25 mm dia medium grade including running up of 4 Sq mm copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified. Note:-Two runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured and paid as one unit length.

M & L for Submain wiring with two single core 4 Sq mm PVC insulated cable FRLS copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and conduit accessories of 25 mm dia medium grade including running up of 4 Sq mm copper conductor multistranded PVC insulated FRLS cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified. Note:-Two runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured and paid as one unit length.

Earthing complete with galvanised steel earth plate electrode 60cm x60cm x6mm thick buried directly in ground earth pit not less than 2.25 mtr deep below normal ground level ) with top edge of plate not less than 1.5m below ground level, connecting to the Galvanised iron earth earth lead 4 mm dia, by means of nuts, bolts, check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe light grade 15mm bore from earth electrode to test point incl provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone agagregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25x6mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, GI pipe light grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling test point made out of Bronze/Gun metal with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50mtr, all as per electrical plate No 5 of SSR Part-I and connection to earth test point all as specified incl testing on completion. Note :- Item of Earthing includes cost of 7.5m long galvanised iron earth lead 4 mm size and protection pipe of 15 mm bore GI light grade.

S & F in replacement of UNSV Security Lights luminaire in single pc drawn aluminium IP 66 with high power LED as light source with acrylic cover suitable for 1x36 w LED lamp including provision of three runs of PVC insulated 1100 volts grade single core cable with copper conductors multistranded cable on bldg all as spcified as directed & including GI pipe bracket for security light fittings made from 25mm dia med grade 1500mm long bend to shape welding etc and fixed on bldg wall with 50x5 mm flat iron MS clamp and necessary nuts bolts and washers complete all as specifed and as directed by engr in charge

M&L for rewinding of exhaust fans of any sweep with super enameled copper wire of suitable size of any make/type/model incl transporation and all accessories required at site for refixing all as directed by Engr-in-Charge.

Supply only wall mounted fan and exhaust fan capacitors of 3.15/4.00 Mfd

Supply and Fix ceiling fan including down rod and connecting up including provision of cable from ceiliing rose, clamps, supports fabricated from structural steel sections including nuts, bolts washersm welding, bending hot or cold, drilling holes for bolts in any shape or size as directed complete all as specified.

S&F PVC body Exhaust Fan AC single phase 230/240 V of size 300 mm sweep with louvre complete including making of hole in wall etc all as specified and as directed by Enginear -in-charge

Disconnecting and removing ceiling fan of 1200/1400 mm sweep from any height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly examine replacement of split pins, cotter pins and check nuts etc overhauling, lubricating with approved lubricants, reassembling, including replacement of wornout/ defective parts, refixing in original position including minor repairs for the smooth functioning and provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan including painting of ceiling fan complete with synthetic enamel paint by spraying including filling cavities with filler , one coat after cleaning all dust etc & testing complete all as specified. Note :- 1. PVC 2 Core copper cable multstandrad of size 0.50 Sqmm from ceiling rose to ceiling fan deemed to be included in the rate quoted by the contractor 2. Necessary repairs/replacement of unserviceable parts shall be measured and paid seperately.

M & L Rewinding of burnt ceiling fan of 1200 / 1400mm sweep motor with supper enameled copper wire of suitable size as per details given below of any make, type, model incl transportation (inclusive of material & labour) complete all as specified and directed by Engineer -in-charge.

Supply only Sealed ball bearing suitable for ceiling fan of any size

Supply only Rubber bushes with MS clamp,bolt,nut and split pins

Supply only Fan condensor 2.5 mfd

Supply & replace downrod of 4 ft height

S&F Single pole and nuetral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed by Engineer-in-Charge

Supply & Fixing all metal vertical mounted Storage Water Heater 4 star rated powder-coated body with vacuum and pressure release valve and snap action thermostat, thermal cutout , non return devices, of capacity 25 ltrs,1.5 KW, 240 volts,with plug top, PVC connections for hot/cold water, confirming to IS:2082 complete all as specified and directedby Engineer-in-Charge.

Supply and laying steel water tubing, medium grade, galvanised of size 15 mm bore, ISI marked including all ISI marked fittings such as tees, bends elbow reducer, unions etc laid in trenches complete including cutting the existing pipe of any size all as specified and directed .

Supply and fix gun metal gate valve ISI marked cast copper alloy screwed down high pressure with crutch or butter handle screwed both ends for iron pipe or for union and fixed completely as specified suitable for pipe size 15 mm bore.

M & L for repairs to copper inner container like denting, soldering, brazing, leak testing and reassembling of any capacity water heater (Geyser) complete all as specified.

S & Fix modular ceiling fan regulator step type AC 240 volt suitable for 1200/1400 mm sweep. Make:- Anchor/ CG/ Bajaj/ Havells

Supply and fix Modular ceiling fan regulator 2 module step type AC 240 volts suitable for 1200 sweep. Make:- Anchor/ CG/ Bajaj/ Havells

S&Fmodular bell push button Single pole 230v

Supply and replace MCB DB double door TPN 4 Way with 200A rated busbar including 63A/100A 4 pole isolator incl removing the existing US one and making good the disturbed surface to match with the existing surface

S.R.M.K Enterprises

SAI RUPA CONSTRUCTIONS

MAHALAKSHMI INFRA PROJECTS

PARDEEP AND CO

BEEGEE DESIGN SYSTEMS